Products in Other Industrial Applications: Resins, Binders & Matrix ...

Rhino Linings USA, Inc. 1320 Resin is a Ultra Low Viscosity Epoxy Resin. Ultra low viscosity epoxy for infusion. Used for producing composite laminates using injection or vacuum infusion techniques at ambient temperature.

Rhino Linings USA, Inc. 1301 Resin is a Standard Undiluted Epoxy Resin. The standard press mold epoxy system for composite laminates and parts. All listed hardeners cure very quickly at standard process temperatures 160°F – 210°F.

Rhino Linings USA, Inc. 1307LV Resin is a Epoxy Resin for Kit Aircraft. Kit Aircraft Laminating and Adhesive System. System has excellent wet out, low viscosity and high strength.

Lindoxy 190 is a general-purpose cycloaliphatic epoxy resin with a low viscosity. It has been found to be useful for potting and composite applications, which require good electrical resistance properties, good weatherability, and high glass transition temperatures.

Rhino Linings USA, Inc. 1310T Resin is a Thixotropic (non-draining) Epoxy for Laminating and Tooling. Thixotropic version of 1310L-6 used for vertical laminates, tooling or where a nondraining epoxy system is desired.

Rhino Linings USA, Inc. 1337 Resin is a High Temperature Epoxy Novolac Tooling Resin. High temperature Novolac laminating and tooling epoxy. 350°F HDT after post cure.

Rhino Linings USA, Inc. 1314 Resin is a Marine Laminating, Low Viscosity Epoxy Resin/ Offsets:West 105. Used for marine applications such as laminates, adhesives, sealers and fairing compounds. Also used where a low viscosity, quick curing epoxy system is desired. Very low mixed viscosities quickly wet thick reinforcements. Exhibits very low exudation, allowing secondary bonding with minimal preparation.

Lindoxy 290 is a non-crystallizing, low viscosity epoxidized phenol novolac resin with an average functionality of 3. Lindoxy 290 is designed for composites that require a high glass transition temperature along with great chemical resistance.

Rhino Linings USA, Inc. 1401-21 Resin is a 1401-21 Resin is a Epoxy System for Infusion. Multifunctional epoxy and cycloaliphatic-amine blend hardener for high performance composite parts.

Rhino Linings USA, Inc. 1308NC Resin is a Economical Low Viscosity General Purpose Epoxy Resin. Low viscosity, economical general purpose epoxy resin with low odor. Used for fiberglass laminating and civil engineering applications.

Rhino Linings USA, Inc. 1382 Resin is a Low Modulus Flexible Epoxy Resin.1:1 highly flexible epoxy system. Retains flexibility at low temperature. 150% elongation, even when aged. Convenient 1:1 volumetric mix ratio.

Rhino Linings USA, Inc. 1310L-6 Resin allows the parts or tools to be used in many elevated service temperature environments. Low mixed viscosity quickly wets thick reinforcements. Convenient 4:1 volumetric mix ratio.

Rhino Linings USA, Inc. 1379 Resin is a Laminating and Tooling Epoxy Resin. Specialty epoxy system used for making large scale parts such as wind turbine rotors. Long working life with quick cure. High Tg without post cure.

TC-1622 A/B is an unfilled laminating resin for high temperature mold and part fabricationformulated to provide superior wet-out and adhesion to a variety of substrates. It is agreat material for Vacuum Assisted Resin Transfer Molding (VARTM) as well as other wet lay-up methods due to its low viscosity and long working time. When properly cured TC-1622 A/B can be used up to350°F (177°C).

Rhino Linings USA, Inc. 1310T-Lt Bl Resin is a 100% solids, non-draining, epoxy system for producing Cured In-Place Pipe.. 100% solids, non-draining, epoxy system for producing Cured In-Place Pipe. It is tinted transparent blue, and the hardeners are transparent yellow.

Rhino Linings USA, Inc. 1319 Resin is a Press Molding Resin Modified for Improved Flexibility and Adhesion. Press molding epoxy system, modified for added flexibility and adhesion. All listed hardeners cure very quickly at standard process temperatures (160°F – 210°F).