Products in Other Industrial Applications: Dimensional Stability

TİSESTER® F 15D03 R01 is a PBT, 15% Glass Fiber Reinforced, Natural

ZA 35-15 GLASS is a addition silicone (PLATINUM curing agent) that is liquid and transparent,

PAR Group Nylon 6 Metal Detectable Sheet is a popular engineering plastic due to its ease of machinability. It combines high strength, stiffness and hardness properties with good creep and wear resistance. Our highly visible blue metal detectable Nylon 6 contains very fine material additives making it detectable to most metal detector equipment. It also has lower moisture absorption than standard nylon 6.

Armlen PP MD 40-5TS is a 40% mineral filled thermos-stabilized polypropylene. This material displays high resistance to impact loads, good rigidity, and dimensional stability. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment etc. Available in white color.

TİSESTER F 20D03 K02 R01 is a PBT, 20% Glass Fiber Reinforced, Heat Stabilized, Natural.

SAMBARK LFT PP1320E/PP1330E is the product of injection moldable (Long-Fiber reinforced Thermoplastics) resin manufactured with a unique pultrusion technology. LFT is supplied as pellets from 6mm to 25mm long with same length of glass fibers. LFT is ideal for structural parts in automotive and industrial application. LFT is a new material that can reduce weight & cost by replacing of heavy materials.

Pomalux® CN-F is conductive acetal copolymer that contains non-sloughing carbon-fibers which not only act to produce a conductive material with surface resisitivty of 102 – 106 ohms/sq, but also provides enhanced mechanical characteristics including strength and stiffness.

TİSESTER F 30D03 F01 K02 HS R01 is a PBT, 30% Glass Fiber Reinforced, Flame Retardant-Halogen (Rohs Compliance), Heat Stabilized, Natural.

Gichem DG08 Polypropylene is PP 40% talc, high dimensional stability and stiffness, High Injection Speed.

Flontech PTFE FT-CF10-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

A 40% mineral filled, thermostabilized polypropylene. This material displays high resilience to impact, good rigidity, dimensional stability. This material is compliant with European safety requirements. Available in white color.

Flontech PTFE FT-CAR25-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

Zhermack ZA 13 Mold WT45 is a addition silicone (Platinum curing agent) whish has low viscosity, high mechanical resistance, dimensional stability, precision in reproduction. Its color translucid and used in mold making.

GERMAFORM 9 GF 25 is a polyoxymethylene (POM) copolymer material, which contains 25% glass fiber reinforced materials. This product is available in Europe.

PBT Glass fiber 20% reinforced

SAMBARK LFT PP1330 is the product of injection moldable (Long-Fiber reinforced Thermoplastics) resin manufactured with a unique pultrusion technology. LFT is supplied as pellets from 6mm to 25mm long with same length of glass fibers. LFT is ideal for structural parts in automotive and industrial application. LFT is a new material that can reduce weight & cost by replacing of heavy materials.

Flontech PTFE FT-STST50-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

Murylon® A GF, the properties of this material surpass the already impressive characteristics of Murylon® A. This is possible thanks to admixed glass fibers. The result: A clear improvement in cold flow behavior and dimensional stability. This enables higher static pressure loads to be endured. Production based on PA66.

Flontech PTFE FT-GL25-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

GERMAFORM MF20-6624 is a polyoxymethylene (POM) copolymer material. This product is available in Europe. The main characteristics of GERMAFORM MF20-6624 are: flame retardant/rated flame.

TİSESTER® F 10D03 R01 is a PBT, 10% Glass Fiber Reinforced, Natural

Solver Polyimide Polyimide Resin Composite 40% Graphite can be used for aircraft, aviation, automobile, office equipment, electrical and electronic equipment, scientific instruments, industrial machinery, production equipment and so on. The polyimide is fit for the application surroundings which can be temperature resisting, sealed, dimensional stability, deformation without fracture, such as seeling ring, thrust washer, sliding bearing, vacuum pump vane, valve seat, gear and so on.

PPS-SG455E43 PPS is a 45% glass fiber reinforced polyphenylene sulfide compound developed to provide low cost and good engineering properties and processability

Ubesta™ 3030 U is a high viscosity, non-reinforced and non-plasticized Polyamide 12 preferably for extrusion application. UBESTA 3030 U shows only low moisture absorption and therefore exceptional dimension stability..

KODAK ESTAR™ HIGHLY CONDUCTIVE (HCF) FILMS 6RF1-911T is an optically clear and highly conductive flexible film. It is a high-quality polyester film (PET) featuring a proprietary conductive polymer (PEDOT/PSS) coated in-line during the manufacturing process.

GERMAFORM 13 is a polyoxymethylene (POM) copolymer material. This product is available in Europe.

PA6 / ABS alloy, Impact modified

TİSESTER® F 20D03 F01 K02 HS R01 is a PBT, 20% Glass Fiber Reinforced, Flame Retardant-Halogen (Rohs Compilance), Heat Stabilized, Natural

KODAK ESTAR™ HIGHLY CONDUCTIVE (HCF) FILMS 6RF1-931T is an optically clear and highly conductive flexible film. It is a high-quality polyester film (PET) featuring a proprietary conductive polymer (PEDOT/PSS) coated in-line during the manufacturing process.

ZA 22 WT3 Spray is a addition silicone (PLATINUM curing agent) which has the product have to be used by spray. Ideal for vacuum bagging or for impression of vertical surface. It appears in light blue color and used in vacuum bagging.

Zhermack HT 33 Transparent is a addition silicone (Platinum curing agent) which has low viscosity, dimensional stability, precision in reproduction, high mechanical resistance, durability. It appears in translucid color and used in Mold Making, Jewelry etc.

Flontech PTFE FT-CARR25-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

SAMBARK LFT PA-LCF20 is the product of injection moldable (Long-Fiber reinforced Thermoplastics) resin manufactured with a unique pultrusion technology. LFT is supplied as pellets from 6mm to 25mm long with same length of glass fibers. LFT is ideal for structural parts in automotive and industrial application. LFT is a new material that can reduce weight & cost by replacing of heavy materials.

ZA 50 LT is a addition silicone (PLATINUM curing agent) which has good mechanical resistance, dimensional stability, precision in reproduction, resistance to high temperature. It appears in blue color and used in mold making.

GERMAFORM 9 MF 10 is a polyoxymethylene (POM) copolymer material that contains 10% mineral fillers. This product is available in Europe.

Zhermack ZA 35 Mold is a addition silicone (Platinum curing agent) which has low viscosity, dimensional stability, precision in reproduction. It appears in yellow color and used in mold making.