Products in Other Industrial Applications: Excellent Mechanical Stre...

Ketron® Sterra™ CA30 PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance than Ketron GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® Sterra™ CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Ketron® Sterra™ HPV PEEK shapes are carbon fiber reinforced with graphite and PTFE lubricants. This gives them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron® Sterra™ HPV PEEK’s combination of low wear, low friction, and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves, and seals. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Inhance Fluoro-Seal UH-1150 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Eurothane 185 ACCE with high mechanical strength and abrasion resistance has increased resistance to hydrolysis and improved low temperature flexibility. Swelling in oils, greases and solvents is minimal. With excellent low compression set, these products are used in automotive and heavy-duty engineering applications.

Inhance Fluoro-Seal UH-1250 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Eurothane 175 ACCE with high mechanical strength and abrasion resistance has increased resistance to hydrolysis and improved low temperature flexibility. Swelling in oils, greases and solvents is minimal. With excellent low compression set, these products are used in automotive and heavy-duty engineering applications.

TİSESTER F 20D03 K02 R01 is a PBT, 20% Glass Fiber Reinforced, Heat Stabilized, Natural.

TİSESTER® F 10D03 R01 is a PBT, 10% Glass Fiber Reinforced, Natural

Inhance Fluoro-Seal UH-1900 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Eurothane 195 ACCE with high mechanical strength and abrasion resistance has increased resistance to hydrolysis and improved low temperature flexibility. Swelling in oils, greases and solvents is minimal. With excellent low compression set, these products are used in automotive and heavy-duty engineering applications.

Inhance Fluoro-Seal UH-1700 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

PET Glass fiber 20% reinforced

Eurothane 175 DCCE with high mechanical strength and abrasion resistance has increased resistance to hydrolysis and improved low temperature flexibility. Swelling in oils, greases and solvents is minimal. With excellent low compression set, these products are used in automotive and heavy-duty engineering applications.

TİSESTER F 30D03 F01 K02 HS R01 is a PBT, 30% Glass Fiber Reinforced, Flame Retardant-Halogen (Rohs Compliance), Heat Stabilized, Natural.

PBT Glass fiber 20% reinforced

Eurothane 160 DCCE with high mechanical strength and abrasion resistance has increased resistance to hydrolysis and improved low temperature flexibility. Swelling in oils, greases and solvents is minimal. With excellent low compression set, these products are used in automotive and heavy-duty engineering applications.

Durostone® UPM S2 is a fiber-reinforced plastic with very high mechanical properties. This plastic spheric a defined flammability. The fiber reinforcement is carried out with a glass mat or glass fabric.

TİSESTER® F 15D03 R01 is a PBT, 15% Glass Fiber Reinforced, Natural

TİSESTER F 30D05 R01 is a PBT, 30% Glass Bead Reinforced, Natural.

Inhance Fluoro-Seal UH-1045 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Inhance Fluoro-Seal UH-1500 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

TİSESTER F 25D03 F01 K02 HS R01 is a PBT, 25% Glass Fiber Reinforced, Flame Retardant-Halogen (Rohs Compliance), Heat Stabilized, Natural.

PBT GF 15% reinforced V-0

Inhance Fluoro-Seal UH-1750 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

BigRep PA6/66 is a polyamide grade 3D printing filament combining excellent heat and chemical resistance, mechanical properties and printability.

AS-SG401A63 is a glass fiber reinforced by PPS bassed PA66 aloy to provide excellent mechanical strength,toughness,and rigidity,along with excellent flow in thin-walled parts,low flash characteristics,and fast cycle times.It may be easily molded in conventional injection molding equipment utilizing water heated molds

TİSESTER F UNR F01 K02 HS R01 is a PBT, Flame Retardant-Halogen (Rohs Compilance), Heat Stabilized, Natural.

TİSESTER® F 20D03 F01 K02 HS R01 is a PBT, 20% Glass Fiber Reinforced, Flame Retardant-Halogen (Rohs Compilance), Heat Stabilized, Natural

Inhance Fluoro-Seal UH-1080 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Inhance Fluoro-Seal UH-1035 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

PET Glass fiber 30% reinforced

TİSESTER F UNR F01 K04 HS R01 is a PBT, Flame Retardant-Halogen (Rohs Compilance), Impact Modified, Natural.

Eurothane 190 ACCE with high mechanical strength and abrasion resistance has increased resistance to hydrolysis and improved low temperature flexibility. Swelling in oils, greases and solvents is minimal. With excellent low compression set, these products are used in automotive and heavy-duty engineering applications.

PET Glass fiber 15% reinforced

TİSESTER F 30D03 R01 is a PBT, 30% Glass Fiber Reinforced, Natural.