Products in Other Industrial Applications: High Temperature Resistance

Zhermack ZA 35 Mold Fast is a low viscosity, dimensional stability, precision in reproduction. It appears in light green color and used in molding making.

Korrels B.V. PA, unfilled is the most commonly used engineering thermoplastics in various markets due to their excellent strength and durability properties. At 4KTEC, we develop and commercialize a variety of polyamide compounds for a wide variety of applications. These customer specific compounds have the advantage that we can adapt them to significantly change the properties of the material and add values ​​to the material, such as extreme stiffness, high dimensional stability and low warp properties.

Zhermack ZA 35 Mold is a addition silicone (Platinum curing agent) which has low viscosity, dimensional stability, precision in reproduction. It appears in yellow color and used in mold making.

G-PAEK™ 1100P G is Ultra High performance thermoplastic polymer, unreinforced Polyether Ketone, semi crystalline, powder for extrusion compounding, standard flow, food contact compliant, color natural white.

Korrels B.V. PA, unfilled, flame retardant, natural is the most commonly used engineering thermoplastics in various markets due to their excellent strength and durability properties. At 4KTEC, we develop and commercialize a variety of polyamide compounds for a wide variety of applications. These customer specific compounds have the advantage that we can adapt them to significantly change the properties of the material and add values ​​to the material, such as extreme stiffness, high dimensional stability and low warp properties.

G-PAEK™ 1120FEP is Ultra High Performance Thermoplastic polymer, 20% PTFE blended in Polyether Ketone, semi-crystalline fine powder suitable for compression molding, milky white in color.

NasnoBrite MB is a clear tone truly universal Optical Brightener MasterBatch suitable for all Plastics, Resins & Rubber including Engineering Resins i.e. PA6, PA66 and also PVC etc.

PPS-SG303E41 is a 30% glass fiber reinforced linear polyphenylene sulfide compound developed to provide toughness,high flow,temperature and chemical resistant and excellent processability

PolyFibra® PF-PEF04 are partly composed of plant fibers and are therefore partly bio-based. Products made from these materials help reduce fossil fuel consumption by up to 50%.

Ceramer 20 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

Murpec® SP is a High wear resistance; High compressive strength; Good slide properties; Good continuous temperature behavior. Production based on PEEK-SP.

Korrels B.V. PA, Impact modified is the most commonly used engineering thermoplastics in various markets due to their excellent strength and durability properties. At 4KTEC, we develop and commercialize a variety of polyamide compounds for a wide variety of applications. These customer specific compounds have the advantage that we can adapt them to significantly change the properties of the material and add values ​​to the material, such as extreme stiffness, high dimensional stability and low warp properties.

PPS-SG503E65 PPS is a 50% glass fiber reinforced polyphenylene sulfide compound developed to provide excellent engineering properties and processability

Ketoprix™ EKT23G3C2L are thermoplastic aliphatic polyketone compounds containing the base 1,4-diketone polymer backbone structure with added fiber reinforcement and thermally conductive additives. Additional thermal stabilizers and lubricants are also added to assist in injection molding.

G-PAEK™ 1100PF is Ultra High performance thermoplastic polymer, unfilled Polyether Ketone, semi crystalline, fine powder for compression molding, standard flow, suitable for food contact application, color natural white.

ZA 22 WT3 Spray is a addition silicone (PLATINUM curing agent) which has the product have to be used by spray. Ideal for vacuum bagging or for impression of vertical surface. It appears in light blue color and used in vacuum bagging.

PPS-SG301A65 is a 30% glass fiber reinforced linear polyphenylene sulfide compound developed to provide toughness,high flow,temperature and chemical resistant and excellent processability

Solver Polyimide Polyimide Resin Composite 40% Graphite can be used for aircraft, aviation, automobile, office equipment, electrical and electronic equipment, scientific instruments, industrial machinery, production equipment and so on. The polyimide is fit for the application surroundings which can be temperature resisting, sealed, dimensional stability, deformation without fracture, such as seeling ring, thrust washer, sliding bearing, vacuum pump vane, valve seat, gear and so on.

Ceramer 60 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

Zhermack ZA 13 Mold WT45 is a addition silicone (Platinum curing agent) whish has low viscosity, high mechanical resistance, dimensional stability, precision in reproduction. Its color translucid and used in mold making.

S-1 Glass™ is an Industrial Grade Product which has high Volume applications where E-Glass performance does not deliver.

NasnoBrite MB 01 is based on similar characteristic of NasnoBrite™ MB with eye pleasing blue tone.

Zhermack HT 33 Transparent is a addition silicone (Platinum curing agent) which has low viscosity, dimensional stability, precision in reproduction, high mechanical resistance, durability. It appears in translucid color and used in Mold Making, Jewelry etc.

The compound NEXA® PFX 9020 is a new and innovative chemical resistance Perfluoroelastomer filled with a special semi-crystalline perfluoropolymer filler. Due to its innovative and unique technology, allows the manufacturing of translucent items with excellent final properties. The compound PFX 9020 contains a proprietary cure system that improves high temperature performance.

ZA 50 LT is a addition silicone (PLATINUM curing agent) which has good mechanical resistance, dimensional stability, precision in reproduction, resistance to high temperature. It appears in blue color and used in mold making.

G-PAEK™ 1120SFE is Ultra High Performance Thermoplastic polymer, 20% PTFE blended in Polyether Ketone, semi-crystalline granules suitable for injection molding, easy flow, light Beige in color.

BigRep PETG is the material is full compatible with all FFF open-build 3D printers, and has been optimized for use on BigRep large-scale machines, for a wide range of applications.

ZC 30-120 is a Condensation silicone (TIN curing agent) which has low viscosity, high mechanical resistance. It appears in whitish color and used in mold making.

PC-ABS Gecomblend 3000 FR HT is a flame-retardant PC / ABS type with very good temperature resistance, fire protection class V-0 (1.5mm).

Ceramer 60 LF is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

NasnoStab ST 03 MB is a unique UV stabilizer for use in GPPS, MABS, SAN, ACRYLIC & PP in transparent as well as opaque applications. Even at higher concentration the base polymer transparency is unaffected & prevent yellowing for a very longer time.

VTEC™ GF63 is a High temperature resistance and it is Superior mechanical properties

PolyGlo MB is a clear tone high performance brightener MasterBatch for use in PP and BOPP including Random PP.

Solver Polyimide Polyimide Resin Composite 15% Graphite can be used for aircraft, aviation, automobile, office equipment, electrical and electronic equipment, scientific instrument, industrial machinery production equipment, and so on. The polyimide is fit for the application surroundings which can be temperature resisting, sealed, dimensional stability, deformation without fracture, such as sealing ring, thrust washer, sliding bearing, vacuum pump vane, valve seat, gear and so on.

Korrels B.V. PA, unfilled, MoS2, modified is the most commonly used engineering thermoplastics in various markets due to their excellent strength and durability properties. At 4KTEC, we develop and commercialize a variety of polyamide compounds for a wide variety of applications. These customer specific compounds have the advantage that we can adapt them to significantly change the properties of the material and add values ​​to the material, such as extreme stiffness, high dimensional stability and low warp properties.

XTX 45 OIL BLEEDING is a addition silicone (PLATINUM curing agent) which has high transparency adapt for rapid prototyping, high mechanical properties. Two version: DRY and OIL BLEEDING (suggested for the resin). It appears trasparent and used in rapid prototyping.