Products in Paper & Pulp: Good Light Fastness

MGA® NATURA 5250 Magenta is a fast setting sheet fed offset series for printing organoleptically neutral print products on cardboard and other absorbent substrates.

MGA® CORONA 5200 Magenta is a organoleptically neutral and offer low-migration properties.

MGA® CORONA 5200 Cyan is a organoleptically neutral and offer low-migration properties.

MGA® NATURA 5250 Black is a fast setting sheet fed offset series for printing organoleptically neutral print products on cardboard and other absorbent substrates.

MGA® CORONA 5200 Black is a organoleptically neutral and offer low-migration properties.

MGA® NATURA 5250 Cyan is a fast setting sheet fed offset series for printing organoleptically neutral print products on cardboard and other absorbent substrates.

Jänecke+Schneemann Druckfarben FL Ink Group 14/P are a water-based pigmented ink system for surface printing. This ink series was specially developed for flexo printing on ruled paper.

Bioset Cyan are vegetable ink with excellent performance, for use in presses sheetfed offset with or without water/alcohol system, specially developed to cover a wide range of common papers in offset. They are vegetable-based inks based on renewable sources, they have minimal odor and low migration, are manufactured according to the BPC (EUPIA code of good practices) which makes it very suitable for printing the outside of food packaging, food wrappers, toys and cosmetics.

Brigal Radiance 200 Cyan are valid for both sheet and coil, and including those of high solidity. Excellent adhesion on recommended substrates. Indicated for high quality prints.

Brigal Nature Black are inks with a high percentage of vegetable base, they present a very good balance water-ink, very good transfer and therefore excellent performance. They have a low draft and viscosity to cover a very wide range of supports. common in offset. It is a range recommended for printing glossy coated paper, offset, recycled, cardboard and cardboard; it is also suitable for matte substrates and semi mates. They are inks formulated mainly with renewable Raw Materials; they present a low level of odor, low level of VOCs, they are also free of heavy metals, halogenated hydrocarbons and any other substance dangerous to health or the environment, therefore they are recommended for printing food packaging secondary, cosmetic packaging, pharmaceuticals, textbooks and catalogs.

Interactive Inks and Coatings DIPK10-2 has high heat and water resistance which make ink suitable for water-based printing which is an excellent choice for direct or indirect thermal printing applications. Depending on the substrate and heat application, this ink have provided heat resistance up to 450ºF and eliminate pick-off or ink transfer to the print heads. Excellent ribbon transfer allows this ink for extreme versatility of both direct and indirect imaging applications. This ink offers excellent printability on both papers and films and can be used in typical label applications as well.

Interactive Inks and Coatings DIPK13-05 has high heat and water resistance which make ink suitable for water-based printing which is an excellent choice for direct or indirect thermal printing applications. Depending on the substrate and heat application, this ink have provided heat resistance up to 450ºF and eliminate pick-off or ink transfer to the print heads. Excellent ribbon transfer allows this ink for extreme versatility of both direct and indirect imaging applications. This ink offers excellent printability on both papers and films and can be used in typical label applications as well.

Doneck Euroflex U.K. Euro-Max PCA/PCF is specially designed for printing on heavy-duty bags, agricultural and fertilizer sacks, and foil pouches for detergents. Characterized by high resistance to light and chemicals, and excellent weather-resistance. It ensure smooth processing in printing units, and guarantee the color properties necessary for the end product.

Brigal Radiance 200 Black are valid for both sheet and coil, and including those of high solidity. Excellent adhesion on recommended substrates. Indicated for high quality prints.

Mirage Inks PUMA is a hydrocarbon free polyamide ink system designed for good quality general purpose printing on a variety of substrates.

Biostar Cyan are valid for both sheet and coil, and including those of high solidity. Excellent adhesion on recommended substrates. Indicated for high quality prints.

Interactive Inks and Coatings DIPB13-01 has high heat and water resistance which make ink suitable for water-based printing which is an excellent choice for direct or indirect thermal printing applications. Depending on the substrate and heat application, this ink have provided heat resistance up to 450ºF and eliminate pick-off or ink transfer to the print heads. Excellent ribbon transfer allows this ink for extreme versatility of both direct and indirect imaging applications. This ink offers excellent printability on both papers and films and can be used in typical label applications as well.

Interactive Inks and Coatings DIPV13-02 has high heat and water resistance which make ink suitable for water-based printing which is an excellent choice for direct or indirect thermal printing applications. Depending on the substrate and heat application, this ink have provided heat resistance up to 450ºF and eliminate pick-off or ink transfer to the print heads. Excellent ribbon transfer allows this ink for extreme versatility of both direct and indirect imaging applications. This ink offers excellent printability on both papers and films and can be used in typical label applications as well.

Interactive Inks and Coatings DIPG13-01 has high heat and water resistance which make ink suitable for water-based printing which is an excellent choice for direct or indirect thermal printing applications. Depending on the substrate and heat application, this ink have provided heat resistance up to 450ºF and eliminate pick-off or ink transfer to the print heads. Excellent ribbon transfer allows this ink for extreme versatility of both direct and indirect imaging applications. This ink offers excellent printability on both papers and films and can be used in typical label applications as well.

Bioset Black are vegetable ink with excellent performance, for use in presses sheetfed offset with or without water/alcohol system, specially developed to cover a wide range of common papers in offset. They are vegetable-based inks based on renewable sources, they have minimal odor and low migration, are manufactured according to the BPC (EUPIA code of good practices) which makes it very suitable for printing the outside of food packaging, food wrappers, toys and cosmetics.

Doneck Euroflex U.K. Euro-Fast PFA is used on heavy-duty bags, agricultural and fertilizer sacks, and foil pouches for detergents. This series is characterized by high light fastness and high resistance to chemicals and water. It ensure smooth processing in printing units, and guarantee the color properties necessary for the end product.

Interactive Inks and Coatings DIRH13-02 has high heat and water resistance which make ink suitable for water-based printing which is an excellent choice for direct or indirect thermal printing applications. Depending on the substrate and heat application, this ink have provided heat resistance up to 450ºF and eliminate pick-off or ink transfer to the print heads. Excellent ribbon transfer allows this ink for extreme versatility of both direct and indirect imaging applications. This ink offers excellent printability on both papers and films and can be used in typical label applications as well.

Brigal Nature Cyan are inks with a high percentage of vegetable base, they present a very good balance water-ink, very good transfer and therefore excellent performance. They have a low draft and viscosity to cover a very wide range of supports. common in offset. It is a range recommended for printing glossy coated paper, offset, recycled, cardboard and cardboard; it is also suitable for matte substrates and semi mates. They are inks formulated mainly with renewable Raw Materials; they present a low level of odor, low level of VOCs, they are also free of heavy metals, halogenated hydrocarbons and any other substance dangerous to health or the environment, therefore they are recommended for printing food packaging secondary, cosmetic packaging, pharmaceuticals, textbooks and catalogs.

Biostar Black are valid for both sheet and coil, and including those of high solidity. Excellent adhesion on recommended substrates. Indicated for high quality prints.