Products in Other Paper & Pulp Applications: Paint Manufacturing

Wollastonite is a calcium inosilicate mineral (CaSiO₃) with a theoretical makeup of approximately 48% calcium oxide and 52% silicon dioxide. Wollastonite is usually white in color. It may contain small amounts of iron, magnesium, and manganese which can give it a gray, red, or brown tint. Wollastonite is an industrially important mineral. It is well known for its good fluorescence. It also has low moisture and absorption properties.

PCC Chemax Caustic soda lye 35% solution is an inorganic chemical compound of the hydroxide group, belonging to the strongest alkali. In liquid form it is a colorless, odorless and non-flammable product called caustic soda liquid. It belongs to a group of basic raw materials, so it is used almost in every industry.

Iparsol 60 (iso-Hexane) is a special boiling point product, mixture of paraffinic and naphthenic hydrocarbons with a very low aromatic content, typical value max. 50 ppm. By using suitable raw materials and hydrogenation processes, we are able to produce this product with only a mild odor. By varying the naphtenic content we can adjust the solvating properties.

Lubricarb® Coated Calcium Carbonate is used widely in polymer composites to improve the physical properties, and allow various functionalities and improved workability. At the same time, the cost of the polymer composites can be decreased greatly by replacing the volume of expensive resin with this filler.

Iparsol 90 (iso-Heptane) is a special boiling point product, mixture of paraffinic and naphthenic hydrocarbons with a very low aromatic content, typical value max. 50 ppm. By using suitable raw materials and hydrogenation processes, we are able to produce this product with only a mild odor. By varying the naphtenic content we can adjust the solvating properties.

Cales De Llierca Precipitated Calcium Carbonate (Pcc) is a precipitated calcium carbonate with scalenohedral morphology. Its particular structure, purity and size distribution curve enable increased whiteness and opacity when it is used as filler in paper.

Sodium hydroxide in solid form, also called caustic soda, is an inorganic chemical compound belonging to the strongest alkali. In solid form, it is a white substance with crystalline appearance (flakes). It has hygroscopic properties. It is perfectly soluble in water, forming corrosive soda lye , which is accompanied by the release of significant amounts of heat.

Indian Oxides and Chemicals Antimony Pentoxide IND Star CPO-25 is a pale yellow to yellow color transparent aqueous liquid.

Indian Oxides and Chemicals Antimony Trioxide IND Star - RG is an excellent flame retardant for plastics and rubber, laminates, insulation, paints & varnishes, paper and textiles, in combination with a halogen source. Opacifying agent for enamels and ceramic pigments, paints and printing inks. Its fine particle size gives a good reactivity in the preparation of antimony-based pigments.

Marathwada Chemicals Gloss White is a companion product to light ALUMINA HYDRATE. The use of GLOSS WHITE as a dry pigment powder has also been confined mainly to PAPER & INK applications. Gloss white is valued for its soft, non abrasive texture and its excellent working and printing properties. It is less susceptible to "Livering" than light ALUMINA HYDRATE. Although GLOSS WHITE is more expensive than a mechanical blend of 3BaSo4/Al(OH)3, the coprecipitate is favored on the basis of superior processing characteristics and reduced tendency to absorb drier from ink vechicles on storage.

PCC Chemax Caustic soda lye 40% solution is an inorganic chemical compound of the hydroxide group, belonging to the strongest alkali. In liquid form it is a colorless, odorless and non-flammable product called caustic soda liquid. It belongs to a group of basic raw materials, so it is used almost in every industry.

PCC Chemax Caustic soda lye 25% solution is an inorganic chemical compound of the hydroxide group, belonging to the strongest alkali. In liquid form it is a colorless, odorless and non-flammable product called caustic soda liquid. It belongs to a group of basic raw materials, so it is used almost in every industry.

PCC Chemax Caustic soda lye 50% solution is an inorganic chemical compound of the hydroxide group, belonging to the strongest alkali. In liquid form it is a colorless, odorless and non-flammable product called caustic soda liquid. It belongs to a group of basic raw materials, so it is used almost in every industry.

PCC Chemax Caustic soda lye 30% solution is an inorganic chemical compound of the hydroxide group, belonging to the strongest alkali. In liquid form it is a colorless, odorless and non-flammable product called caustic soda liquid. It belongs to a group of basic raw materials, so it is used almost in every industry.

PCC Chemax Caustic soda lye 45% solution is an inorganic chemical compound of the hydroxide group, belonging to the strongest alkali. In liquid form it is a colorless, odorless and non-flammable product called caustic soda liquid. It belongs to a group of basic raw materials, so it is used almost in every industry.

KSIL® 2.2 is potassium silicate obtained by fusing quartz sand and potassium carbonate at high temperature. In the solid state they are amorphous and look like glass. They dissolve in water (waterglass) to afford colloidal solutions of an alkaline nature.