Products in Power, Water & Utilities: Polyolefins

SIMONA® PE 100 black 10024793 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

SIMONA® PE 100 black 10024801 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

Atlas HPE 110 is a new type of material with IPN (interpenetrating polymer network structure). Due to this unique chemical structure, it is an ideal choice for applications with high strength, fatigue resistance, high temperature resistance and impact resistance. It is widely used in large-scale wind power blades and main supporting components, ships, sports equipment and other fields.

Aerovac A2500 is a pink, modified PMP polymer film, with excellent release characteristics, suitable for a wide range of parting film applications up to 400°F (204°C).

High crystalline polypropylene(PP) is a industrial,Sports,Leisure and automotive.

Aerovac A2200 is a clear orange, modified PE polymer film ideal for use in resin infusion and compatible with epoxy, polyester and vinylester resins up to 248°F (120°C).

Nidaplast is a polypropylene honeycomb covered or not on both faces with a soft polyester non-woven fabric.

KoeppCell® K/PE 45 FR is closed-cell having soft-elastic PE foam. It is chemically crosslinked polyethylene foam.

Laminate G Ply - GY continuous fiber reinforced thermoplastic laminate single-layer tape or sheet is a thermoplastic composite material formed by hot pressing-cold pressing and other processes after angle layup design.

Micropol L20 is a rotational molding powder based on a conventional polyethylene formulation designed to produce moldings with a high gloss finish and outstanding toughness. This material has been established for many years as an outstanding low density polyethylene powder for Rotational Molding.

ALTAFLUOR® 2E0 FEP ENVIRO is designed specifically for use in environmental sampling applications. This cost effective choice is the preferred product for applications requiring the purity of FEP without exposure to aggressive chemical or other harsh conditions and it does not impart taste, odor or other contaminants.

Micropol L7 is a rotational molding powder based on a conventional polyethylene formulation designed to produce moldings with a high gloss finish and outstanding toughness. This material has been established for many years as an outstanding low density polyethylene powder for Rotational Molding.

Microcene MC181 is a second generation, metallocene medium density polyethylene, with Hexene as co-monomer, suitable for rotational molded items requiring superior mechanical properties. Outstanding process and product benefits result from using polymers of narrow molecular weight distribution and low viscosity at zero shear rates.

SIMONA® PE 100 black 10024798 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

Atlas HPE 250 is a new type of material with IPN (interpenetrating polymer network structure). Due to this unique chemical structure, it is an ideal choice for applications with high strength, fatigue resistance, high temperature resistance and impact resistance. It is widely used in large-scale wind power blades and main supporting components, ships, sports equipment and other fields.

Microlin ML54 is a rotational molding powder based on a specially developed easy flow linear polyethylene formulation designed to produce moldings of good rigidity combined with excellent impact resistance & environmental stress crack resistance.

SIMONA® PE 100 black 10024800 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

KoeppCell® K/PE 40 CN is closed-cell having soft-elastic PE foam. It is chemically crosslinked polyethylene foam.

Allied Metrics EPDM O-Rings provide superior sealant capabilities and are highly resistant to a variety of conditions. This is ethylene-propylene rubber, which is a copolymer; however, we make our EPDM a terpolymer by adding a small amount of a third monomer, which allows the material to vulcanize with sulfur.

Atlas HPE 160 is a new type of material with IPN (interpenetrating polymer network structure). Due to this unique chemical structure, it is an ideal choice for applications with high strength, fatigue resistance, high temperature resistance and impact resistance. It is widely used in large-scale wind power blades and main supporting components, ships, sports equipment and other fields.

EB 1200 is a Ethyle Propylene Diene monomer with aramid. 125” Single Ply Aramid Inserted EPDM Belt[Press/Roto Cured].

SIMONA® PE 100 black 10024799 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

Lumicene® mPE M3581 UV is a Second generation Metallocene PE for rotomolding applications requiring good mechanical properties and gloss.

KM-U-143sMR is an octane copolymer MDPE Rotational Molding Resin that contains processing antioxidant and a UV stabilizer. This grade shows exceptional low temperature impact properties, low viscosity, and easy mold release.

SIMONA® PE 100 black 10024775 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

KoeppCell® K/PE 35 is closed-cell having soft-elastic PE foam. It is chemically crosslinked polyethylene foam.

SIMONA® PE 100 black 10024802 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

SIMONA® PE 100 black 10024794 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

Polymer Industries' Densetec® Homopolymer Polypropylene exhibits the properties of high corrosion resistance, high temperature resistance, and great tensile strength. It maintains its stiffness at elevated temperatures and displays incredible resistance to organic solvents, degreasing agents, and electrolytic attack. In addition, the material is lightweight, and stain and moisture resistant. Due to its chemical resistance, Densetec® Homopolymer Polypropylene is ideally suited to be used with a wide range of chemicals. Its resistance to aggressive media permits it to be used in laboratories and a large variety of industrial applications. The material resists most strong acids and bases even at relatively high temperatures and concentrations.

KoeppCell® K/PE 35 FR is closed-cell having soft-elastic PE foam. It is chemically crosslinked polyethylene foam.

Microcene MC182 is a new ‘Tank Grade’ polymer from Micropol based on Metallocene technology. A second generation, metallocene medium density polyethylene, with Hexene as co-monomer, suitable for rotational molded items requiring superior mechanical properties. Outstanding process and product benefits result from using polymers of narrow molecular weight distribution and low viscosity at zero shear rates.

KoeppCell® K/PE 35 A is closed-cell having soft-elastic PE foam. It is chemically crosslinked polyethylene foam.

Unidirectional belt G Tape - GT uses continuous fiber as the reinforcing material and thermoplastic resin as the base material to form a high-strength, high-impact, fully recyclable composite material through the corresponding infiltration process.

TKG® PP (PP) is the lightest of all thermoplastics, and its mechanical characteristics are superior to high-density polyethylene. Its main use is in the chemical industry, as it is resistant to alkalis and acids.

Corex Polypropylene honeycomb is the idealcomponent for any lightweight assembly. It is extremely light but very strong. It provides high stability at a low weight and is resistant to both heat and corrosion.

KoeppCell® K/PE 29 HFFR is closed-cell, soft-elastic, halogen-free PE foam. It is chemically crosslinked polyethylene foam.