Products in Power, Water & Utilities: Silicones

SILFOAM® SE 47 is a versatile antifoam emulsion with a relatively high emulsifier content. It has shown great effectiveness in addressing foam-related challenges in various applications, including textile auxiliaries and processes like dyeing. Additionally, it is suitable for use in surfactant formulations, cooling lubricants based on mineral oils, and for separating monomers from dispersions and converting dispersions into derivatives.

Harcros Chemicals Antifoam 30 Industrial Grade is a 30% antifoam emulsion of polydimethylsiloxane. It is water-dilutable and designed primarily for use in industrial products and processes. This product is not intended for use in food or drug processing. Concentrations of the emulsion required for effective defoaming range from 5 to 100 ppm.

Harcros Chemicals Antifoam 30 Food Grade is a 30% antifoam emulsion of polydimethylsiloxane that is water-dilutable and designed primarily for use in food processing. It is also recommended for many industrial applications, such as textile dyeing and finishing, leather finishing, latex processing, soap and detergent manufacture, and boiler water defoaming. Concentrations of the emulsion required for effective defoaming range from 5 to 100 ppm.

Dispelair® BS 825 is a silicone emulsion defoamer and consists of highly effective processing aids that remove foam in production and during the washing stages of the pulping process. Typically, the foam control agent is added during the screening and washing of brown stock.

SC-550-LV-TC-2 is a 100% silicone solid elastomer designed for electronic potting applications. This two-component system offers a hard, self-bonding, thermally conductive, low modulus material that is readily repairable. SC-550LV-TC-2 is highly filled and offers excellent thermal conductivity. It is also offers a convenient mix ratio of 1:1 by weight and volume.

SC-550-LV-TC-1 is a 100% silicone solid elastomer designed for electronic potting applications. This two-component system offers a hard, self-bonding, thermally conductive, low modulus material that is readily repairable. SC-550LV-TC-1 is highly filled and offers excellent thermal conductivity. It is also offers a convenient mix ratio of 1:1 by weight and volume.

SC-550-LV-RT is a 100% silicone solid elastomer designed for electronic potting applications. This two-component, room temperature curing system offers a hard, self-bonding, thermally conductive, low modulus material that is readily re-workable.

TRANS-414 is a fast, effective, lasting defoaming power and stability in small concentrations.

TRANS-103AD is a food-grade in water-based variety with viscosities from ready to use to super-concentrated.

CGSTAPE - 8058 is a this self wounded double coated polyimide tape has exceptional high temperature resistance and good electrical properties. It is puncture and tear resistant when used at an elevated temperature. This double sided polyimide tape comes with single or double pet liner.

TRANS-3033 is a fast, effective, lasting defoaming power and stability in small concentrations.

TRANS-296 is a tech-grade in specialty silicone antifoam with variety with viscosities from ready to use to super-concentrated.

TRANS-100D is a tech-grade in non-aqueous silicone antifoam variety with viscosities from ready to use to super-concentrated.

TRANS-828 is a fast, effective, lasting defoaming power and stability in small concentrations.

AFC-6 is a tech-grade in specialty silicone antifoam with variety with viscosities from ready to use to super-concentrated.

CGSTAPE - 6558 is a glass cloth tape with a high-temperature thermosetting silicone adhesive. This tape shows excellent dielectric insulation properties and high heat resistant, widely used for electrical insulation for electrical equipment in the fields of petroleum drill- ing, such as motors.

AFC-2 is a tech-grade in specialty silicone antifoam with variety with viscosities from ready to use to super-concentrated.

TRANS-290 is a tech-grade in specialty silicone antifoam with variety with viscosities from ready to use to super-concentrated.

AF-100-TG is a tech-grade in non-aqueous silicone antifoam variety with viscosities from ready to use to super-concentrated.

AE-10-TG is a tech-grade in water-based variety with viscosities from ready to use to super-concentrated.

Tramfloc® 1146 is a 10% active silicone emulsion and nonionic emulsifier with excellent stability and performance efficacy in many waste and process applications where foaming conditions and blankets should be avoided. This Tramfloc formulation is manufactured under strictly sanitary conditions and uses high quality food grade feed stocks. This product is carefully formulated so that it resists degradation. Tramfloc® 1146 is completely water soluble and should be applied wherever foam presents an esthetic or operational problem or regulatory violation possibility. Product is stable in autoclaving.

TRANS-278 is a food-grade in water-based variety with viscosities from ready to use to super-concentrated.

TRANS-2977 is a tech-grade in specialty silicone antifoam with variety with viscosities from ready to use to super-concentrated.

TRANS-102 is a 20% silicone antifoam emulsion designed to give maximum efficiency under a wide variety of conditions

TRANS-5D is a tech-grade in water-based variety with viscosities from ready to use to super-concentrated.

TRANS-3039 is a fast, effective, lasting defoaming power and stability in small concentrations.

TRANS-357PD is a fast, effective, lasting defoaming power and stability in small concentrations.

Stoner, Inc. E218 Extra Heavy Duty Silicone Mold Release is specially formulated as a release agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials. Even the most stubborn, sticking parts release faster and easier with E218, our heaviest viscosity mold release.

ACCESS AF 30 IND can be aqueous or non-aqueous, silicone-free defoamers that are designed to control foam and eliminate entrained air. The functional properties can be developed to eliminate and prevent excessive foam include: water dispersibility, slight insolubility, relative stability, and a high degree of spreadability in the foaming system.

ACCESS AF 105 IND (Water Dispersible) can be aqueous or non-aqueous, silicone-free defoamers that are designed to control foam and eliminate entrained air. The functional properties can be developed to eliminate and prevent excessive foam include: water dispersibility, slight insolubility, relative stability, and a high degree of spreadability in the foaming system.

ACCESS AF 100 IND can be aqueous or non-aqueous, silicone-free defoamers that are designed to control foam and eliminate entrained air. The functional properties can be developed to eliminate and prevent excessive foam include: water dispersibility, slight insolubility, relative stability, and a high degree of spreadability in the foaming system.

RL292 can withstand constant temperature extremes of -65˚ F to 450˚ F (-54˚ C to 232˚ C) with brief excursions to 600˚ F (316˚ C). Silicone-coated Pyroglas® cloths have excellent resistance to most chemicals and oils, and have indefinite shelf life at room temperature. Alpha Associates silicone-coated Pyroglas® cloths are made from proprietary high grade silicone rubber and non-asbestos fiberglass material, to AMS 3320 Rev. G.

NuSil™ CV-9042 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy General Purpose: Dampening Fluids, Lubricants & GreasesComments: Thermally Conductive.

ACCESS AF 20 IND can be aqueous or non-aqueous, silicone-free defoamers that are designed to control foam and eliminate entrained air. The functional properties can be developed to eliminate and prevent excessive foam include: water dispersibility, slight insolubility, relative stability, and a high degree of spreadability in the foaming system.

NuSil™ CV2-2566 is a controlled volatility RTV silicone.

Ecologix Environmental Systems NF-10 Antifoam is a stable, water based silicone defoamer recommended for wastewater treatment applications where membrane filtration is not in use.