Products in Power, Water & Utilities: Tanks

Rhino Linings USA, Inc. 1310T Resin is a Thixotropic (non-draining) Epoxy for Laminating and Tooling. Thixotropic version of 1310L-6 used for vertical laminates, tooling or where a nondraining epoxy system is desired.

DISTITRON® 152 - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce production of gelcoat through mix with fillers and/or additives.

APCM DA 4092 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.

SKAPS Q 3100 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

Polyumac Air-Cell T-200 is a hybrid, closed cell cross-linked polyester foam core that is an economical alternative to other cores used in the production of sandwich composite structures. In addition to its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures.

NORSODYNE® I 99282 TFA - Unsaturated polyester resin in styrene,Orthophthalic. It is used as general purpose in injection molding,rtm,vacuum infusion method.

Norsodyne® 2116VT - thixotropic, preaccelerated. It is generally used in industrial sector applicatons.

NORSODYNE® S 15080 L - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

Armorflex® 960 - standard iso NPG gel coat; excellent blister resistance; resistant to certain chemicals. Main applications areas are building and construction, composites, industrial sector etc.

Polynt Group BMC EP 21 GF - structural material reinforced with fiber glass 45% . Excellent mechanical properties and heat resistance. It is generally used in industrial sector applicatons.

ENYDYNE® R 61500 T - Unsaturated polyester resin in styrene,DCPD. It is used to produce pipes and tanks.

Polynt Group BMC S 1850 RF Structural is a bulk molding compound based on a blend of different thermoset resins, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Excellent mechanical properties, mainly impact resistance, and good fire protection grade are combined into the BMC S 1850 rf. BMC S 1850 RF is certified V0 3,0 mm by UL laboratories. BMC S 1850 RF is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polydyne® 6120 is general purpose, preaccelerated, thixotropic with low reactivity. And it is generally used in composites applicatons.

EPOVIA OPTIMUM® KRF 1051 - Novolac Epoxy Resin based vinyl ester in styrene. It is used to produce pipes and tanks through filament winding,hand lay up and spray up,pultrusion method.

Polynt Group Polygel 33 - iso gel coat; good gloss retention and weatherability; resistant to water and osmotic blistering; also suitable for sanitary market. Main applications areas are composites, industrial sector etc.

Soric® TF 2 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Norsodyne® 2625TI - thixotropic, promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Polynt Group BMC 700-23 VE C is a bulk molding compound based on vinylester resin and reinforced with glass fibers. BMC 700-23 VE C joint good mechanical properties and high chemical resistance. This BMC has been developed for application where is requested anti-static protection. BMC 700-23 VE C is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

DISTITRON® 411 V4 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks through filament winding method.

EPOVIA KAYAK KF3202L Series - Elastomeric BPA-epoxy vinyl ester resin. Main Applications areas are Aeolian,Aeronautical,Agrochemical,Agrobusiness,Automotive,Building and Construction,Composites,Consumer Products,Home and Domestic Applications,Industrial sector,Marine,Mass Transports,Railway Sector etc.

GMS Composites EP – 350 is a formulated epoxy resin matrix prepreg with long shelf life. The product has a versatile curing cycle from as low as 80°C or as high as 160°C, thus enabling the product to be used to produce a wide range of composite items, from large structures to numerous small components. EP-350 is available in a range of substrates such as carbon, glass or aramid. The product also has good dynamic strength properties as well as outstanding hot-wet resistance. The prepreg has good flow and the tack of EP-350 can be varied.

Polynt Group 747-6105 - low color, general purpose RTM resin with rapid cure rate for increased mold turnover. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Polynt Group HUP 23/20 RN-Color is generally used in industrial sector applications.

SMCarbon® 26CF40-12K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

EPOVIA OPTIMUM® KRF 4031 TA - Bisphenol-A Epoxy Resin based vinyl ester in styrene. It is used to produce marine,boats,pools,surficial protection (liner,top coat) through hand lay up and spray up method.

Biresin® CR80 is a low viscosity epoxy resin system suitable for the production of high performance fiber reinforced composites parts and molds with thermal properties up to 80°C.

Norsodyne® G-689STY - thixotropic, preaccelerated, fast cure, crack resistance. It is generally used in industrial sector applicatons.

Norsodyne® 2321 - promoted and waxed, medium viscosity grade. Main applications areas are building and construction, industrial sector etc.

AIREX® C70 is a closed cell, cross-linked polymer foam that combines excellent stiffness and strength to weight ratios with superior toughness. It is non-friable, contains no CFC’s, has negligible water absorption, and provides an excellent resistance to chemicals. The fine cell structure offers an excellent bonding surface. Compatible with most resins and manufacturing processes AIREX® C70 is ideally suited as a core material for a wide variety of sandwich structures subjected to both static and dynamic loads. Thanks to its unique lightness (properties vs. density) C70 is the material of choice for applications where lightweight is a priority.

DISTITRON® 183 B1 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce production of gelcoat through mix with fillers and/or additives.

Carbon-Core M110E100H is Chopped Strand Mat.

Armorflex® 944 - standard iso NPG gel coat; excellent blister resistance; resistant to certain chemicals. Main applications areas are building and construction, composites, industrial sector, marine etc.

DISTITRON® 183 V6 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce pipes and tanks through filament winding method.

Polynt Group 787-5995 - toughened vinyl ester resin core shell rubber that offers dramatically improved fracture toughness and corrosion resistance of typical vinyl ester resins; promoted for room temperature cure. Main applications areas are aeolian, aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, consumer products, home and domestic applications, industrial sector, marine, mass transports, mold manufacture railway sector etc.

NORSODYNE® H 15238 TAE - Unsaturated polyester resin in styrene,Orthophthalic. It is used as general purpose in hand lay up and spray up method.

NORSODYNE® H 84233 L - Unsaturated polyester resin in styrene,halogenated. It is used to produce building panels,parts with high resistance to fire through hand lay up and spray up,continuous laminating method.