Products in Power & Utilities: Molding Compound

SMCarbon® 80CF60-12K/2 is generally used in automotive, industrial sector, leisure and clothing applications.

Polynt Group SMC VE 3700 is a sheet molding compound based on a vinylester resin reinforced with glass fibers. This SMC has been developed for structural parts. SMC VE 3700 joint good mechanical properties, excellent heat resistance and high chemical resistance. SMC VE 3700 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group BMC 396 FC is a bulk molding compound based on an unsaturated polyester resin. BMC 396 FC is conductive compound, has been developed to produce the bipolar plate for the hydrogen battery. BMC 396 FC is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

SMCarbon® 90CF50-3K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

Polynt Group BMC S 1850 RF Structural is a bulk molding compound based on a blend of different thermoset resins, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Excellent mechanical properties, mainly impact resistance, and good fire protection grade are combined into the BMC S 1850 rf. BMC S 1850 RF is certified V0 3,0 mm by UL laboratories. BMC S 1850 RF is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group SMC VE 3700 Vinylester is generally used in industrial sector applications.

SMCarbon® 24CF50-12K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Polynt Group BMC LS 388/20 C Grigio is generally used in industrial sector applications.

SMCarbon® 24CF60-3K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

BMCarbon® 70CF45-12mm - Bulk molding compound based on Epoxy resin and reinforced with carbon fibers designed for compression molding technology. These materials with a potential weight reduced and a freedom high design enter different areas for structural application where high mechanical properties are requested.

Polynt Group BMC EP 21 GF - structural material reinforced with fiber glass 45% . Excellent mechanical properties and heat resistance. It is generally used in industrial sector applicatons.

BMCarbon® 30CF60-12mm is generally used in aeronautical, automotive, industrial sector, leisure and clothing applications.

SMCarbon® 90CF40-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

SMCarbon® 90CF60-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

SMCarbon® 90CF60-3K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

Polynt Group BMC RF 10/20 is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Good mechanical properties and good fire protection grade are combined into the BMC RF 10/20. BMC RF 10/20 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

SMCarbon® 24CF50-50K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These materials with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

RECarbon® 24CFP40-400gr - Recycled molding compound based on vinyl ester resin and reinforced with pyrolized carbon fleece designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

SMCarbon® 26CF40-12K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Polynt Group BMC RF 18 VE is a bulk molding compound based on a vinylester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Excellent mechanical properties, mainly impact resistance, and good fire protection grade are combined into the BMC RF 18 ve.. BMC RF 18 VE is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

SMCarbon® 90CF50-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

UDCarbon® 90CF60-12K is a unidirectional molding compound based on epoxy resin and reinforced with continuous carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

BMCarbon® 70CF45-6mm - Bulk molding compound based on Epoxy resin and reinforced with carbon fibers designed for compression molding technology. These materials with a potential weight reduced and a freedom high design enter different areas for structural application where high mechanical properties are requested.

SMCarbon® 80CF60-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

UDCarbon® 24CF60-12K is generally used in automotive, industrial sector, leisure and clothing applications.

Polynt Group BMC 700-23 VE C is a bulk molding compound based on vinylester resin and reinforced with glass fibers. BMC 700-23 VE C joint good mechanical properties and high chemical resistance. This BMC has been developed for application where is requested anti-static protection. BMC 700-23 VE C is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group HUP 23/20 RN-Color is generally used in industrial sector applications.

RECarbon® 90CFP40-400gr - Recycled molding compound based on epoxy resin and reinforced with reinforced with pyrolized carbon fleece designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

SMCarbon® 24CF50-3K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

SMCarbon® 80CF60-3K/2 is generally used in automotive, industrial sector, leisure and clothing applications.

Polynt Group VUP-2590706GY-33S is generally used in water treatment applications.

Polynt Group HUP 22/20 RB-Color is generally used in industrial sector applications.

SMCarbon® 24CF60-12K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

RECarbon® 24CF40-400gr - Recycled molding compound based on vinyl ester resin and reinforced with carbon fleece designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

SMCarbon® 26CF50-12K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

SMCarbon® 80CF40-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.