Products in Renewable Energy: Prepreg

GMS Composites EP – 280 is a formulated epoxy resin matrix prepreg with long shelf life. The product has a versatile curing cycle from as low as 80°C or as high as 150°C, thus enabling the product to be used to produce a wide range of composite items, from large structures to numerous small components. EP-280 is available in a range of substrates such as carbon, glass or aramid. The product also has good dynamic strength properties as well as outstanding hot-wet resistance. The prepreg has good flow and the tack of EP-280 can be varied.

Ecotechnilin L-FLAXPREG-T-UD-50-60m² is a unidirectional (UD) fibers - FLAXPREG T-UD 50.

HexPly® M79/M79-LT is a hotmelt, thermosetting, low-exothermic epoxy resin matrix, specifically designed for prepreg applications at which short cure cycles below 100°C are required. M79/M79-LT can be used for manufacture of large industrial components, suitable for cure of thin and thick sections. M79/M79-LT exhibits a long out-life of 8 weeks at ambient conditions. M79 is supplied as moderate tack and M79-LT as low tack resin matrix.

GMS Composites EP – 290 is a nano-toughened epoxy resin matrix prepreg with long shelf life. The product has a versatile curing cycle from 100°C or as high as 150°C, thus enabling the product to be used to produce a wide range of composite items, from large structures to numerous small components. EP-290 is available in a range of substrates such as carbon, glass or aramid. This nano-toughened system has outstanding fracture properties and resistance to microcracking. The prepreg has good flow and is of medium tack.

GMS Composites EP – 620 prepreg is a special epoxy resin matrix system with long shelf life and high elongation. EP-620 is designed for composite applications requiring high energy absorption and impact resistance. The product has a versatile curing cycle from as low as 80°C or as high as 150°C, thus enabling the product to be used to produce a wide range of composite items, from large structures to numerous small components. EP-620 is available in a range of substrates such as carbon, aramid, s-glass, polyethylene or e-glass. The prepreg has good flow and the tack of EP-620 can be varied.

APCM DA 409U/S2-glass is a tough, versatile, modified epoxy resin prepreg that cures at 250ºF. The S-2 glass is a Zentron High Strength fiber. Standard weight is 260g/m2 with a 38% resin content. Other weights and resin contents available upon request.

Park’s E-752-MTS is a toughened; 350°F cure epoxy system designed with improved mechanical properties and damage tolerance that is suitable for primary aircraft structures. Consistent with the E-752 family of epoxies, the E-752-MTS allows flexible and robust processing in Autoclave, Out of Autoclave and Press cures. It exhibits improved toughness and impact strength while maintaining good tack and drapeability for ease of layup.

APCM DA 4518U is a tough, versatile, modified epoxy resin system that cures at 250°F to 350°F. DA4518U can be supplied as a prepreg tape coated on unidirectional graphite.

APCM DA 4092 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.

Polyamide 6.6(PA6.6) is a is a industrial,Sports,Leisure and automotive.

GMS Composites EP-272 is a formulated epoxy resin film with long out life. The product has a versatile curing cycle from as low as 70°C or as high as 130°C, thus enabling the product to be used to produce a wide range of composite items, from large structures to numerous small components. EP-272 is a resin film available on a lightweight scrim or without a scrim. The EP-272 resin is compatible with EP270 pre-pregs. The resin film has good flow and the tack of EP-272 can be varied.

ZOLTEK produces uni-directional (UD) prepreg tapes based on ZOLTEK carbon fiber. ZOLTEK prepreg is ideal for large-volume composite applications where high production throughput, excellent composite properties, and low material cost are important. A wide selection of epoxy resin formulations meet most processing and composite property requirements for tack, toughness, surface finish, cure time, cure temperature, and delivered composite strength and modulus. Custom formulations are also available. ZOLTEK prepreg properties, such as fiber areal weight (FAW), resin content, and width, are readily adjusted to exactly meet customer requirements. Packaging options include core size, customer specified knitting requirements, and custom labeling. ZOLTEK prepreg production is geared to large volumes and low cost. Special projects are welcomed.

LTNM600/P3/600 is a Sandwich composite felt. It is a fabric with a sandwich structure made of synthetic non-woven core material with uniform glass fiber short layers or glass fiber cloth on both sides, and multi-axial fabric stitched by polyester stitching threads. The weight is 400~2000g/㎡, and the width is 50~3200mm. Products are widely used in wind energy, nacelle covers, boats, auto parts, etc.

VTC401 is an epoxy resin system designed to give an initial cure at low temperatures or snap cure at high temperatures with enhanced toughness, honeycomb bondability and higher service temperature, giving greater flexibility in component manufacture. It can be supplied on a variety of fabrics in UD format to meet your cost and manufacturing requirements.

GMS Composites EP – 285 is a toughened epoxy resin matrix prepreg with long shelf life. The product has a versatile curing cycle from as low as 80°C or as high as 150°C, thus enabling the product to be used to produce a wide range of composite items, from large structures to numerous small components. EP-285 is available in a range of substrates such as carbon, glass or aramid. This toughened system has outstanding fracture properties and resistance to microcracking. The prepreg has good flow and the tack of EP-285 can be varied.

Toray 8020 is a new generation of toughened epoxy resin systems offering a balance of mechanical properties and excellent surface finish. The resin system has been developed to offer a long out life and flexible cure schedules and can be applied to a wide range of high performance fibers. Toray 8020 is compatible for co-cure with Toray’s resin film, Toray 8020, and Toray’s syntactic core, Toray MicroPly™ SC8020A.

Park’s E‐720 is a modified epoxy resin system designed toexposure to high temperature. E‐720 has a proven history inmany demanding aerospace applications.

APCM DA 4082 is 200°F cure modified epoxy prepreg system which can be prepreged on fiberglass fabric, woven Kevlar, or other woven fabrics. In addition to their low temperature cure capabilities, DA 4080 prepregs have excellent flow to allow for vacuum bag cure conditions. DA 4080 is a one sided pre-impregnated system yielding a single sided tack material. DA 4082 is the same system except that both sides of the fabric are coated yielding a double sided tack material. Both prepregs can be used for laminating and honeycomb sandwich construction.

Park’s E-752 is a toughened, 365°F cure epoxy system designed for demanding structural applications up to 265°F/wet. E-752 offers a good balance of toughness, high service temperature and good moisture resistance, as well as excellent tack and drape. Formulated for both oven and autoclave cure, E-752 provides for easy processing with oven cure, without sacrificing mechanical properties.

High crystalline polypropylene(PP) is a industrial,Sports,Leisure and automotive.

Toray BT250E-1 resin system is a 121°C (250°F) cure epoxy prepreg system with excellent toughness and strength. It provides an outstanding surface finish under vacuum-bag/oven-cure only. The resin system, which is self-adhesive to honeycomb and foam core, is MIL-R-9300 qualified and makes a great choice for many Applicationss in the low-tomedium-service temperature range.

GMS Composites EP – 284 is a formulated epoxy resin matrix prepreg with long shelf life and improved handling. The product has a versatile curing cycle from as low as 80°C or as high as 150°C, thus enabling the product to be used to produce a wide range of composite items, from large structures to numerous small components. EP-284 is available in a range of substrates such as carbon, glass or aramid. The product also has good dynamic strength properties as well as outstanding hot-wet resistance. The improved handling allows for easier molding of complex parts. The prepreg has good flow and the tack of EP-284 can be varied.

Unidirectional belt G Tape - GT uses continuous fiber as the reinforcing material and thermoplastic resin as the base material to form a high-strength, high-impact, fully recyclable composite material through the corresponding infiltration process.

Park’s E-752-LT is a toughened; 350°F (177°C) cure epoxy resin system with 315°F (157°C) wet Tg for primary and secondary structural applications. E-752-LT is formulated for efficient processing in high volume Automated Fiber Placement (AFP) applications manufacturing. The resin system offers a combination of toughness, low moisture uptake and good mechanical properties. E-752-LT is formulated to laminate In Autoclave (AC), Out of Autoclave (OOA) and Press cure conditions.

GMS Composites EP – 530 is a flame retardant epoxy resin matrix prepreg with long shelf life. The product has a versatile curing cycle from as low as 80°C or as high as 150°C, thus enabling the product to be used to produce a wide range of composite items, from large structures to numerous small components. EP-530 is available in a range of substrates such as carbon, glass or aramid. The product is self-extinguishing and meets the UL 94 V-0 classification. The flow and tack of EP-530 can also be varied.

Toray Toray AmberTool® HXR56 New is a low temperature curing epoxy composite tooling prepreg, fully impregnated into a carbon multiaxial backing ply construction. This two-layer product facilitates 3-D construction while allowing efficient lay-up, reducing overall tooling costs. HXR56 prepreg is co-compatible with our heritage AmberTool® HX56 carbon 205gsm 2x2 twill reinforcement surface ply. After a suitable post cure, an end use temperature of 180°C (356°F) is achieved. 40–55°C (104–131°F) Low Temperature Curing Epoxy Tooling Prepreg.

APCM DA 4518 E-Glass is a modified epoxy system coated on heavy weight unidirectional E-Glass fibers. This product is designed to build excellent unidirectional strength using a minimum number of plies. DA 4518/E-Glass Uni also features extended room temperature out time and service temperatures to 300°F.

APCM DA 4517 is an epoxy prepreg designed for a temperature range of -67°F (-55°C) to 350°F (177°C), with a cure of 180°F (82°C) for three hour. Shorter cures times are available at higher temperatures. The system is designed to be post cured if the higher temperature service range is required.

Toray E721-FR is a modified epoxy resin system of medium viscosity for cures at 120°C (248°F), pre-impregnated into high performance fibers such as carbon, glass, and aramid. Toray E721-FR offers excellent structural properties, flame retardancy, and exceptional toughness allowing direct lamination to honeycomb without the use of resin film. Toray E721-FR is designed for structural Applicationss in the motor racing, marine industries, and for a wide range of engineering Applicationss. If fire-retardant properties are not required, consult separate data sheet for Toray E720.

HexPly® M10R is a formulated epoxy resin which is suitable for low pressure molding processes. HexPly® M10R is very versatile and allows a range of processing temperature from 85°C up to 150°C. HexPly® M10R can be used for very large industrial components subjected to several environmental conditions and exhibits a very long shelf life at room temperature. HexPly® M10R is used extensively for structural marine applications, recreational markets and a wide variety of industrial applications. HexPly® M10R fulfills REACH compliance.

LTC150 Prepreg is designed to cure in a lower time at low temperatures than standard tooling prepregs whilst giving the potential for high temperature tooling. It can be supplied on a variety of fabrics to meet your cost and manufacturing requirements.

Toray Toray AmberTool® HX56 is a low temperature curing epoxy composite tooling prepreg. After a suitable post cure, an end use temperature of 180°C (356°F) is achieved. Toray AmberTool® HX56 achieves an excellent surface finish for small to medium sized autoclave tooling.

GMS Composites EP – 350 is a formulated epoxy resin matrix prepreg with long shelf life. The product has a versatile curing cycle from as low as 80°C or as high as 160°C, thus enabling the product to be used to produce a wide range of composite items, from large structures to numerous small components. EP-350 is available in a range of substrates such as carbon, glass or aramid. The product also has good dynamic strength properties as well as outstanding hot-wet resistance. The prepreg has good flow and the tack of EP-350 can be varied.

APCM DA 4090 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.

Toray E650 is a low temperature curing toughened resin system pre-impregnated into high performance fibers such as carbon, glass and aramid. It is designed for the production of composite structures in the leisure and sporting industries and also for a range of engineering Applicationss. Toray E650 is compatible for co-cure with Toray’s low temperature cure resin film, Toray EF44, and Toray’s low temperature cure syntactic core, Toray MicroPly™ LT64.

LTC102 Prepreg is designed to cure at low temperatures whilst giving the potential for high temperature tooling. It can be supplied on a variety of fabrics to meet your cost and manufacturing requirements.