Products in Renewable Energy: High Performance

Crestapol® 1261 Urethane Acrylate Resin is a modified version of Crestapol® 1260 but with an extended open or work time. It is a low-viscosity urethane acrylate type resin that is suitable for infusion, resin transfer molding (RTM), and similar processes at room temperature and can be infused at vacuum levels down to -1.0 bar. This product produces laminates with high strength, toughness, and exceptional water and hydrolysis resistance.

Crystic® Ultra-Low Styrene Ecogel S1PA is an ultra-low-styrene-content spray gel coat. This market-leading, unique technology spray gel coat has only 16% styrene content, which cuts styrene emissions by over 55%. It is suitable for use in industrial and general-purpose applications in transport, building, and industrial markets. This product is also used for the manufacture of wind turbine blades.

Crestapol® 1250 Urethane Acrylate Resin is a low-viscosity urethane acrylate resin. It is designed for maximum wet out for pultruding fiberglass, carbon fiber, and other fibers. This product efficiently produces fast-curing, very tough, high-strength composites with superior water and hydrolysis resistance. Run times and formulation will depend on the geometry and complexity of the die. It will run very fast, making for very efficient pultruded parts.

Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.

Superohm® 2565 is an oil and solvent resistant off-white colorable polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line. It is formulated to obtain balanced performance characteristics with excellent electrical properties suitable for operation up to 450F (230C) and 25 kV in appropriate cable construction when extruded and cured consistent with industry standards.

Superohm® 2560 is an oil and solvent resistant off-white colorable polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line. Cables jacketed with this compound are recognized for balanced properties including excellent heat and deformation resistance at high temperatures, oil resistance, and superior mechanical properties and is suitable for operation up to 450F (230C) in appropriate cable construction when extruded and cured consistent with industry standards.

CoreLite PVC F 80 is a closed-cell foam core material engineered for high toughness and tremendous impact resistance, delivering unmatched performance in shock absorbing structures. CoreLite PVC F series has excellent shear elongation properties. It is cold formable and also thermoformable. Compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many high performance, lightweight composite applications.

CoreLite PVC F 60 is a closed-cell foam core material engineered for high toughness and tremendous impact resistance, delivering unmatched performance in shock absorbing structures. CoreLite PVC F series has excellent shear elongation properties. It is cold formable and also thermoformable. Compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many high performance, lightweight composite applications.

CoreLite PVC F 100 is a closed-cell foam core material engineered for high toughness and tremendous impact resistance, delivering unmatched performance in shock absorbing structures. CoreLite PVC F series has excellent shear elongation properties. It is cold formable and also thermoformable. Compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many high performance, lightweight composite applications.

CoreLite PVC F 130 is a closed-cell foam core material engineered for high toughness and tremendous impact resistance, delivering unmatched performance in shock absorbing structures. CoreLite PVC F series has excellent shear elongation properties. It is cold formable and also thermoformable. Compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many high performance, lightweight composite applications.

Atlas F65 has a very good honeycomb structure and special chemical properties, which can be effectively used in all standard industries and processing industries, such as hand lay-up, vacuum infusion, RTM and other processes. It is a globally applicable material, widely used in fields such as wind turbine cabin covers, ships and non-structural parts.

Cel Components S.R.L. Pet W FR-FR100 is a polyethylene ter based fire retardant structural foam cores. Pet Foam is a thermoplastic core material suitable for a variety of sandwich applications to increase performance and reduce weight. It is used in sandwich panel applications in railway wagons and in shipyards and for wind power applications. It is easy to work with and has good dimensional stability at elevated temperatures. It is suitable for a variety of processes including infusion, prepreg and pressing.

Atlas HPE 120 is a new type of material with IPN (interpenetrating polymer network structure). Due to this unique chemical structure, it is an ideal choice for applications with high strength, fatigue resistance, high temperature resistance and impact resistance. It is widely used in large-scale wind power blades and main supporting components, ships, sports equipment and other fields.

Cel Components S.R.L. Pet/W GR200 is a polyethylene ter based structural foam cores. It is made from 100% post-consumer PET. Pet Foam is a thermoplastic core material suitable for a variety of sandwich applications to increase performance and reduce weight. It is used in sandwich panel applications in railway wagons and in shipyards and for wind power applications. It is easy to work with and has good dimensional stability at elevated temperatures. It is suitable for a variety of processes including infusion, prepreg and pressing.

Atlas HPE 160 is a new type of material with IPN (interpenetrating polymer network structure). Due to this unique chemical structure, it is an ideal choice for applications with high strength, fatigue resistance, high temperature resistance and impact resistance. It is widely used in large-scale wind power blades and main supporting components, ships, sports equipment and other fields.

Cel Components S.R.L. Pet/W GR150 is a polyethylene ter based structural foam cores. It is made from 100% post-consumer PET. Pet Foam is a thermoplastic core material suitable for a variety of sandwich applications to increase performance and reduce weight. It is used in sandwich panel applications in railway wagons and in shipyards and for wind power applications. It is easy to work with and has good dimensional stability at elevated temperatures. It is suitable for a variety of processes including infusion, prepreg and pressing.

Atlas HPE 110 is a new type of material with IPN (interpenetrating polymer network structure). Due to this unique chemical structure, it is an ideal choice for applications with high strength, fatigue resistance, high temperature resistance and impact resistance. It is widely used in large-scale wind power blades and main supporting components, ships, sports equipment and other fields.

HWP180CA is High performance fiber woven fabric. It is a kind of fabric woven from various high-performance fibers with surface treatment through different weaving processes such as plain weaving and twill weaving. Products are widely used in aerospace, military industry and national defense, infrastructure engineering, wind blades, sports and leisure and other fields.

Dragonite™ -XR is a halloysite-­‐based aluminosilicate clay exhibiting a rare, naturally occurring hollow tubular structure. Through its unique morphology and ideally-­‐suited chemistry, it enhances the properties of wide range of thermoset resins to meet the requirements of demanding applications. Dragonite™-XR is an untreated product grade with slightly lower reactivity and acidity due to 2% iron oxide content. It is recommended at loadings of 30 - 60 wt%.

Atlas F60 has a very good honeycomb structure and special chemical properties, which can be effectively used in all standard industries and processing industries, such as hand lay-up, vacuum infusion, RTM and other processes. It is a globally applicable material, widely used in fields such as wind turbine cabin covers, ships and non-structural parts.

CWP200 is High performance fiber woven fabric. It is a kind of fabric woven from various high-performance fibers with surface treatment through different weaving processes such as plain weaving and twill weaving. Products are widely used in aerospace, military industry and national defense, infrastructure engineering, wind blades, sports and leisure and other fields.

Cel Components S.R.L. Pet W FR-FR150 is a polyethylene ter based fire retardant structural foam cores. Pet Foam is a thermoplastic core material suitable for a variety of sandwich applications to increase performance and reduce weight. It is used in sandwich panel applications in railway wagons and in shipyards and for wind power applications. It is easy to work with and has good dimensional stability at elevated temperatures. It is suitable for a variety of processes including infusion, prepreg and pressing.

Atlas HPE 250 is a new type of material with IPN (interpenetrating polymer network structure). Due to this unique chemical structure, it is an ideal choice for applications with high strength, fatigue resistance, high temperature resistance and impact resistance. It is widely used in large-scale wind power blades and main supporting components, ships, sports equipment and other fields.

Cel Components S.R.L. Pet W FR-GFR70 is a polyethylene ter based fire retardant structural foam cores. Pet Foam is a thermoplastic core material suitable for a variety of sandwich applications to increase performance and reduce weight. It is used in sandwich panel applications in railway wagons and in shipyards and for wind power applications. It is easy to work with and has good dimensional stability at elevated temperatures. It is suitable for a variety of processes including infusion, prepreg and pressing.

Cel Components S.R.L. Pet/W GR80 is a polyethylene ter based structural foam cores. It is made from 100% post-consumer PET. Pet Foam is a thermoplastic core material suitable for a variety of sandwich applications to increase performance and reduce weight. It is used in sandwich panel applications in railway wagons and in shipyards and for wind power applications. It is easy to work with and has good dimensional stability at elevated temperatures. It is suitable for a variety of processes including infusion, prepreg and pressing.

Rhino Linings USA, Inc. 1307LV Resin is a Epoxy Resin for Kit Aircraft. Kit Aircraft Laminating and Adhesive System. System has excellent wet out, low viscosity and high strength.

Atlas F80 has a very good honeycomb structure and special chemical properties, which can be effectively used in all standard industries and processing industries, such as hand lay-up, vacuum infusion, RTM and other processes. It is a globally applicable material, widely used in fields such as wind turbine cabin covers, ships and non-structural parts.

Cel Components S.R.L. Pet/W GR115 is a polyethylene ter based structural foam cores. It is made from 100% post-consumer PET. Pet Foam is a thermoplastic core material suitable for a variety of sandwich applications to increase performance and reduce weight. It is used in sandwich panel applications in railway wagons and in shipyards and for wind power applications. It is easy to work with and has good dimensional stability at elevated temperatures. It is suitable for a variety of processes including infusion, prepreg and pressing.

Atlas HPE 180 is a new type of material with IPN (interpenetrating polymer network structure). Due to this unique chemical structure, it is an ideal choice for applications with high strength, fatigue resistance, high temperature resistance and impact resistance. It is widely used in large-scale wind power blades and main supporting components, ships, sports equipment and other fields.

Cel Components S.R.L. Pet/W GR70 is a polyethylene ter based structural foam cores. It is made from 100% post-consumer PET. Pet Foam is a thermoplastic core material suitable for a variety of sandwich applications to increase performance and reduce weight. It is used in sandwich panel applications in railway wagons and in shipyards and for wind power applications. It is easy to work with and has good dimensional stability at elevated temperatures. It is suitable for a variety of processes including infusion, prepreg and pressing.

Verkid® BMC PX4 is a fiber reinforced compound, in a thermoset resin matrix, with mineral fillers and different additives. Generally thermoset unsaturated polyester or vynil-ester resins are used as organic matrix. With the aim of enhance its characteristics and improve its transformation, other components are added: catalysts, inhibitors, thermoplastic additives, demoulding agents, thickeners and pigments.

Cel Components S.R.L. Pet/W GR320 is a polyethylene ter based structural foam cores. It is made from 100% post-consumer PET. Pet Foam is a thermoplastic core material suitable for a variety of sandwich applications to increase performance and reduce weight. It is used in sandwich panel applications in railway wagons and in shipyards and for wind power applications. It is easy to work with and has good dimensional stability at elevated temperatures. It is suitable for a variety of processes including infusion, prepreg and pressing.

Verkid® SMC H154 is used in hot press, compression molding for the production of large parts with high mechanical properties and excellent surface finish. It is a glass fiber reinforced compound, in a thermoset resin matrix, with mineral fillers and different additives.

Cel Components S.R.L. Pet/W GR135 is a polyethylene ter based structural foam cores. It is made from 100% post-consumer PET. Pet Foam is a thermoplastic core material suitable for a variety of sandwich applications to increase performance and reduce weight. It is used in sandwich panel applications in railway wagons and in shipyards and for wind power applications. It is easy to work with and has good dimensional stability at elevated temperatures. It is suitable for a variety of processes including infusion, prepreg and pressing.

Carbkid® Fiber VE SMC is a polymer composite material reinforced with carbon fiber, which consists of a thermoset resin (usually vinylester or epoxy) and different additives that allow to obtain certain specific characteristics and improve the behavior of the material during the molding process of the final product. While the standard SMC is reinforced with glass fibers, the CSMC is reinforced with cut fibers or carbon fabrics. CSMC materials combine the low-weight characteristics offered by carbon composites in conjunction with a widespread forming process, such as compression molding, which allows for short manufacturing cycles and is therefore suitable for industrial applications in large series.

BWP200 is High performance fiber woven fabric. It is a kind of fabric woven from various high-performance fibers with surface treatment through different weaving processes such as plain weaving and twill weaving. Products are widely used in aerospace, military industry and national defense, infrastructure engineering, wind blades, sports and leisure and other fields.