Products in Water Treatment: Corrosion Resistant

CompositeWrap™ BDC20 Carbon Fabric is a medium weight, high tensile strength bidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ BDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

CompositeWrap™ UDC20 Carbon Fabric is a medium weight, high tensile strength unidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ UDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

Duro-Bond Hypalon is an elastomeric sheet lining having excellent abrasion, heat, and corrosion resistance.. It is available either as a precured lining or as an uncured lining that must be vulcanized with steam or hot air cured before it can be used.

Duro-Bond PVDF is a laminated sheet lining consisting of a layer of polyvinylidene fluoride (PVDF) resin laminated onto a layer of fabric cloth or vulcanized chloroprene rubber backing that is readily bonded to steel, concrete, or FRP substrates.

Electro Chemical Engineering EC Duro-Bond Chlorobutyl is an uncured chlorobutyl elastomer applied in sheet form and vulcanized after application using exhaust steam. Sheet thicknesses of 120 mils (2.3 mm), 150 mils (3.4 mm), and 180 mils (4.6 mm) are available.

Duro-Bond S-123 are offered by electro chemical. Sheet thicknesses of 120 mils (2.3 mm), 150 mils (3.4 mm), and 180 mils (4.6 mm) are available.

Polymer Industries' Densetec® Homopolymer Polypropylene exhibits the properties of high corrosion resistance, high temperature resistance, and great tensile strength. It maintains its stiffness at elevated temperatures and displays incredible resistance to organic solvents, degreasing agents, and electrolytic attack. In addition, the material is lightweight, and stain and moisture resistant. Due to its chemical resistance, Densetec® Homopolymer Polypropylene is ideally suited to be used with a wide range of chemicals. Its resistance to aggressive media permits it to be used in laboratories and a large variety of industrial applications. The material resists most strong acids and bases even at relatively high temperatures and concentrations.

Duro-Bond Neoprene is an elastomeric sheet lining having good abrasion and chemical resistance. It is available either as a precured lining or as an uncured lining that must be vulcanized with steam or hot air before it can be used. Sheet thicknesses of 60 mils (1.1 mm), 120 mils (2.3 mm), 150 mils (3.4 mm), and 180 mils (4.6 mm) are available.