Products in Aerospace Coatings: Waterborne Ink

DCL 7019 Quinacridone Red Violet, PV.19 is a high-performance pigment developed for use in industrial coatings, automotive refinishing, and coil coatings. This reddish-violet shade is also suitable for plastic and ink applications, and is a close match to Clariant Red E5B. It is used in various high-end paint and plastic applications where excellent fastness properties are required, and is also FDA-approved.

DCL 1319 Quinacridone Red Violet, PV.19 (E3B-70 type), is a high-quality pigment known for its outstanding fastness, heat stability, and resistance properties. This opaque, yellow-shaded quinacridone is slightly more opaque and yellower than the 1219 Quinacridone Red Violet 19 grade.

DCL 1219 Quinacridone Red Violet, PV.19 (E5B type) is a bright, yellow shade quinacridone with excellent overall properties. This pigment is FDA approved (Section 178.3297) and finds major applications in the following: Plastics such as PVC, PP, PS, PE and PET. Automotive/aerospace, decorative, powder and industrial coatings. Solvent flexo, water flexo, inkJet, UV and offset inks

DCL 3777 Phthalocyanine Green, PG.7 (blue shade) is a bright, blue-shaded phthalocyanine with excellent overall properties. The product is FDA-approved (Section 178.3297) and recommended for various applications in inks, coatings, and plastics. It can be easily dispersed in plastics, coatings, and water-based flexo inks.

DCL 2870 Naphthol Red, PR.170 is a blue-shaded red pigment for use where good overall fastness properties are required. It exhibits good overall resistance properties, including lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of paint, plastic, and ink applications.

DCL 1070 Naphthol Red, PR.170 is a very brilliant, opaque, strong, bright yellow shade of naphthol red pigment. It exhibits very good lightfastness, chemical resistance and flow properties. This makes it a highly reliable and versatile choice for a wide range of inks and coating applications.

DCL 1242L Disazo Scarlet, PR.242 is a yellowish shade, red pigment with excellent fastness properties. It shows excellent resistance against ethanol and water. It is mainly applicable in Plastics such as PVC, PE, PP, PS and fiber. Automotive/aerospace, industrial and powder coatings. Solvent flexo and water flexo inks etc.

DCL 1319 Quinacridone Red Violet, PV.19 (E3B type) is an opaque, yellow-shaded quinacridone with excellent fastness properties. It is slightly yellower and more opaque than our 1219 Quinacridone Red Violet 19, and is widely used for high-grade industrial and automotive coatings as well as water- and solvent-based inks.

DCL 1370 Naphthol Red, PR.170 is a very bright, yellow-shaded naphthol red with very good lightfastness, opacity, flow properties, and chemical resistance. The shade of 1370 is yellower and more opaque compared to that of 1970A. It is a reliable and versatile choice for various plastic, ink and coating applications.

DCL 7254 DPP Red, PR.254 (BO type) is a medium red shade DPP pigment that offers excellent masstone weather fastness, heat stability, acid, alkali and solvent resistance. It is recommended for high-end coatings and high-end plastics applications, especially exterior uses where excellent fastness properties are required. Moreover, this pigment is FDA-approved.

DCL 1166 Disazo Scarlet, PR.166 is a transparent, yellow-shaded red with excellent heat stability and very good fastness properties. It is recommended for auto refinishes, solvent industrial coatings, and powder coating applications. It is also recommended for all ink and plastic applications.

DCL 3017-A Phthalocyanine Green, PG.7 is a strong, medium-shade phthalocyanine green pigment that is FDA-approved (Section 178.3297). It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of inks, plastics, and coating applications.

DCL 7354 DPP Red, PR.254 is a yellow-shaded DPP that offers excellent opacity, high color saturation, weather resistance, heat stability, acid, alkali, and solvent resistance. It is recommended for high-end coatings and high-end plastics applications, and is FDA compliant for indirect food contact plastic applications.

DCL 1354 DPP Red, PR.254 (2030 type) is a very opaque, bright medium shade red pigment, coloristically yellower and cleaner than the 1254 grade. It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastics, inks, rubber and coating applications.

DCL 1372 DPP Flame Red, PR.272 is a bright, opaque, slightly yellow shade red pigment that stands out as an offset to the industry standard. It boasts excellent overall properties. This pigment finds major applications in the following: Plastics such as PVC, PE and PP Automotive/aerospace, industrial, powder coatings Water flexo, solvent flexo and inkjet inks

DCL 1222 Quinacridone Magenta, PR.122 (Yellow shade), is a high-performance pigment that retains all the typical properties of quinacridone pigments, while offering a more yellowish and brighter masstone and a noticeably yellower, brighter, and stronger tint compared to the 1229 grade.

DCL 3136 Phthalocyanine Green, PG.36 is a strong, yellow-shaded, fully brominated phthalocyanine green pigment of excellent value, tinting strength, and color purity. 3136 has excellent overall properties. It is recommended to be used in a wide range of plastic, ink, and coating applications.

DCL 5051 Phthalocyanine Blue, PB.15:1 is an alpha crystal form of a red-shaded phthalocyanine blue that is rendered solvent stable. 5051 is FDA-approved (Section 178.3297), and is recommended for applications such as general industrial paints, various coatings, printing inks, plastics, rubber, floor coverings, and textile printing.

DCL 1233 Carbazole Violet, PV.23 is a high-performance pigment with a bluish-violet color and high tint strength. It exhibits excellent fastness to light and weathering in most applications and is only slightly affected by reductions with titanium dioxide.

DCL 1419 Quinacridone Violet, PV.19 is a bright, blue-shaded quinacridone with a similar shade to thioindigo red, and it has excellent overall properties. This pigment is FDA-approved (Section 178.3297) and is recommended for use in inks, high-grade industrial paints, implement enamels, agricultural equipment, and powder coating applications.

DCL 1229 Quinacridone Magenta, PR.122 (Blue shade) is a standard magenta shade PR 122 that exhibits all the typical properties of quinacridone pigments. It is a low-warpage pigment, recommended for plastics, coatings, and inks, and finds a wide range of applications in coatings, such as trade sales, automotive, agricultural equipment, architectural paints, and industrial finishes. Its excellent heat stability and exterior durability make it suitable for use in various polymeric resin systems, such as polyolefins, polystyrene, polycarbonate, and ABS.

DCL 7222 Quinacridone Magenta, PR.122 is a highly versatile pigment suitable for use in coatings, inks, and plastic applications. This blue-shaded red pigment is FDA-approved and offers a clean, vibrant shade with excellent fastness properties. Widely used for shading other reds, creating special-effect metallic finishes, and formulating pinks, PR.122 is the basis for the magenta colorant worldwide and is employed in virtually all machine tinting systems, both architectural and industrial.

DCL 1836 Azo Orange, PO.36 is an opaque grade of PO.36 that exhibits a reddish-shaded orange color with excellent light and weather fastness characteristics. 1836 provides high opacity and good flow properties in a variety of plastics, coatings, and inks.

Hydrocer 257 is a stable, non-ionic aqueous synthetic wax dispersion.

SPP-40 is a low molecular weight polypropylene texturing agent.

FluoroSLIP® 533 is a blend of hydrophilic synthetic wax and PTFE where the synthetic wax shows a uniform melting range peaking at 97°C.

SPP-10 is a low molecular weight polypropylene texturing agent. The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

SPP-25 is a low molecular weight polypropylene texturing agent. The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

HydroCER 7410 is a 45% aqueous dispersion of medium molecular weight polyethylene wax. The HydroCER products are wax emulsions, dispersions, or a combination of these.

Hydrocer 7112 is a stable, aqueous synthetic wax dispersion. Keep the lid tight on the container to avoid separation. If this product has separated, simple mixing with paddle or propeller mixer is all that will be required. The Hydrocer products are wax emulsions, dispersions, or a combination of these.

SPP-300 is a low molecular weight polypropylene texturing agent. The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

CeraSPERSE 31 is carnauba wax compounded in Butyl Carbitol (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. Shamrock’s CeraSPERSE products are manufactured using a controlled crystallization process that allows the production of 1 micron wax dispersions. These wax compounds have a translucent appearance with a shiny gloss and a creamy feel. In addition to our standard products, Shamrock can develop and produce a wide range of compounds on a make-to-order basis.

SST®-2 is a white low MW PTFE micropowder with particle size distribution at a mean value of 8 µm. SST®-2 products are Shamrock’s PTFE micropowders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to produce slip, nonstick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

Hydrocer 357 is a stable, non-ionic aqueous spherical synthetic wax dispersion. The Hydrocer products are wax emulsions, dispersions, or a combination of these.

The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

FluoroSLIP® 225 is a blend of low molecular weight synthetic wax and PTFE.