Products in Rail & Mass Transit Coatings: Polyesters

Crystic® Sandable Spray Gelcoat 44PA is an isophthalic sandable spray gelcoat for post painting application. This pre-accelerated, isophthalic, filled gelcoat has been specifically designed for applications that are to be post-painted mainly for transport industry. Crystic Gelcoat 44PA has been formulated for spray application.

Crystic® Sandable Brush Gelcoat 42PA is an orthophthalic sandable gelcoat, filled, pre accelerated and formulated for brush application. It has been specially designed for applications that are to be post-painted. This gelcoat is available in a limited range of colors.

Polymac® 5040 is a low reactivity, high tg carboxyl-functional polyester resin designed for cure with TGIC in a 93:7 ratio 94:6 ratio is also possible . The resulting coatings exhibit excellent flow, exterior durability and mechanical properties, and enhanced impact fusion resistance. Polymac® 5040 is TMA-free.

TRI-REZ® Polyol 1030-60 is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® Polyol 1030- 60 makes it an ideal polyol for formulating high solids and waterborne polyurethane resins.

Polymac® 5160 is a high gloss, general purpose carboxyl-functional polyester resin designed for cure with TGIC at a 93:7 ratio and with primid xl-552 at a 95:5 ratio. The resulting coatings exhibit excellent flow, good flexibility and superior exterior durability. Polymac® 5160 is TMA-free.

TRI-REZ® 1220A-300 is a 100% solids highly branched saturated polyester polyol based on TRIMET® TME (Trimethylolethane). The highly branched structure of TRI-REZ® Polyol 1220A-300 makes it an ideal choice for formulating two component, high solids polyurethane coatings and elastomers that require excellent UV and chemical resistance properties.

TRI-REZ® Polyol 1030-90 is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® Polyol 1030- 90 makes it an ideal polyol for formulating high solids and waterborne polyurethane resins.

Polymac® 2510 is a very versatile, high reactivity, carboxyl-functional polyester resin for powder coatings. It can be cured with epoxy resins with eew's from 500-1000 to yield hybrid formulations with polyester/epoxy ratios from 45:55 to 60:40. These interior decorative or primer coatings cure rapidly and have excellent mechanical and corrosion resistance properties.

Polymac® 2090 is a medium to low reactivity, carboxyl-functional polyester resin for hybrid powder coatings. In combination with suitable epoxy resins EEW = 700-850 in 60:40 ratio, this resin offers excellent flow, good corrosion resistance, good overall chemical resistance, and very good mechanical properties for interior decorative or primer coatings.

Polymac® 5900 is a carboxyl-functional polyester resin designed for cure with TGIC in a 90:10 ratio. The resulting coatings exhibit excellent exterior durability, flow and mechanical properties, along with better hardness and solvent resistance than powder coatings based on a 93:7 system. By physical blending coatings based on polymac® 5900 and polymac® 5400, matte finishes can be achieved. Polymac® 5900 is TMA-free.

TRI-REZ® Polyol 1230-90 is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® Polyol 1230- 90 makes it an ideal polyol for formulating high solids and waterborne polyurethane resins.

Polymac® 5650 is a catalyst-free, carboxy-functional polyester resin designed to cure using TGIC at a 93:7 TGIC ratio. The resulting films using this resin system are characterized by high gloss, excellent hardness, excellent flexibility and color retention, and good exterior durability.

Resin with oustanding mechanical and chemical resistance in combination with aliphatic or mixed isocyanates. Galstaff multiresine FTALON 1651 / 65 PMA is Suitable for aircraft, train and chemical plant coatings.

Etna Tec Limited TEC 33100-F is a saturated polyester resin modified with fluorine, which allows for long term anti-graffiti properties. The product is supplied in propylene glycol monomethyl ether acetate (PMA).

Polymac® 5190 is a high reactivity, bloom-resistant, storage-stable carboxyl-functional polyester resin designed for cure with TGIC in a 93:7 wt. Ratio. It will cure at 130°c for 25 minutes. The resulting coatings exhibit excellent exterior durability and mechanical properties along with good flow.

Polymac® 5050 is a carboxyl-functional polyester resin designed for cure with TGIC in a 93:7 ratio and with primid XL 552 in a 95:5 ratio. The resulting coatings exhibit excellent flexibility, excellent flow and good exterior durability. Polymac® 5050 is TMA-free.

Polymac® 2360 is a very high reactivity, carboxyl-functional polyester resin for hybrid powder coatings. In combination with suitable epoxy resins E.E.W. = 700-950 in 50:50 ratio, this resin offers good flow, good chemical resistance and mechanical properties for interior decorative or primer coatings.

Etna Tec Limited TEC 3296-F is a saturated polyester resin modified with fluorine, which allows for long term anti-graffiti properties. The product is supplied in propylene glycol monomethyl ether acetate (PMA).

TRI-REZ® Polyol 1230-60 is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® Polyol 1230- 60 makes it an ideal polyol for formulating high solids and waterborne polyurethane resins.