Products in Rail & Mass Transit Coatings: Waterborne Coating

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

Eagle Chemicals EAGA CRYL-504 is aqueous anionic, OH-functional Styrene / Acrylic emulsion

S-381-N5 is a modified, micronized blend of natural and synthetic wax that has a uniform melting range peaking at 91°C. Shamrock's product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

TACorr BNi is a ready to use corrosion inhibitor for multimetal, iron & steel. It is mainly designed for all kinds of paint and coating applications.

TACorr G50 Zi is a special formulation based on our TACorr G50 polymer. The anticorrosion properties were further optimized for iron & steel and multimetal applications. TACorr G50 Zi can be used in water borne and solvent borne systems.

SPP-25 is a low molecular weight polypropylene texturing agent. The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

HydroCER 7410 is a 45% aqueous dispersion of medium molecular weight polyethylene wax. The HydroCER products are wax emulsions, dispersions, or a combination of these.

S-395-N2 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

SPP-10 is a low molecular weight polypropylene texturing agent. The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

Hydrocer 7112 is a stable, aqueous synthetic wax dispersion. Keep the lid tight on the container to avoid separation. If this product has separated, simple mixing with paddle or propeller mixer is all that will be required. The Hydrocer products are wax emulsions, dispersions, or a combination of these.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

S-395-N5 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

TACorr MSM is a long-term steel and multi metal corrosion inhibitor of the primary for use in water-based paints & lacquers was developed. . Modifications of our TACorr G50 polymer, TACorr MSM improves the results at the undercreeping at the scretch after the salt spray test.

Hydrocer 135 is an aqueous amide wax dispersion.

High brightness, work-horse calcined kaolin clay, extremely low crystalline silica content.

S-381-N1 is a micronized synthetic and natural wax alloy that has a uniform melting range peaking at 91°C. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-395-SP5 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity, and the high onset of melt. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-379-H is a synthetic wax with a DSC peak melt around 100°C and corresponding low onset of melting. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-483 is a spherical synthetic wax with a DSC melt peak above 110°C. It has good onset of melting and low crystallinity. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

SPP-300 is a low molecular weight polypropylene texturing agent. The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

SST®-2 is a white low MW PTFE micropowder with particle size distribution at a mean value of 8 µm. SST®-2 products are Shamrock’s PTFE micropowders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to produce slip, nonstick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

HydroCER 584 is a 35% aqueous dispersion of high molecular weight polyethylene wax. The HydroCER products are wax emulsions, dispersions, or a combination of these.

TACorr G50 is a novel, polymeric corrosion inhibitor, offering multi metal protection, e. g. On alumina alloys, iron & steel, non ferrous metals, zinc and others. It was developed through a combined R&D project with Fraunhofer IFAM, Bremen.

S-400-Q is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 108 – 146°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

TACorr G50-50 is a ready to use water soluble version of the pure polymer TACorr G50

S-375 is a synthetic wax with a DSC peak melt around 100°C and the corresponding low onset of melting. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

CeraSPERSE 31 is carnauba wax compounded in Butyl Carbitol (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. Shamrock’s CeraSPERSE products are manufactured using a controlled crystallization process that allows the production of 1 micron wax dispersions. These wax compounds have a translucent appearance with a shiny gloss and a creamy feel. In addition to our standard products, Shamrock can develop and produce a wide range of compounds on a make-to-order basis.

flashproTAC F2M is a flashrust inhibitor for iron & steel, mainly for paint & coating applications. Because of its unique formulation (contrary to nearly all other FRI´s) it has a very good tox profile and no labeling.

NonSKID 8001 is a combination of micronized polypropylene and PTFE. Shamrock’s NonSKID micropowders provide resistance to sliding forces.

SPP-40 is a low molecular weight polypropylene texturing agent.

flashproTAC C4E is a ready to use flashrust inhibitor for iron & steel. It is mainly designed for all kinds of paint & coating applications.

Hydrocer 357 is a stable, non-ionic aqueous spherical synthetic wax dispersion. The Hydrocer products are wax emulsions, dispersions, or a combination of these.

S-363 is a synthetic wax alloy showing melting peaks ranging from 92 – 141°C. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

TACorr MSW is a long term multimetal protection designed especially for problems with sandblasted aluminum in paint & coatings. TACorr MSW is a TACorr G50 polymer modification with benefits in adhesion for example at the scratch after salt spray test on various metals.

TACorrSil CX2 is a ready to use corrosion inhibitor for multimetal, iron & steel. It is mainly designed to improve the adhesion in all kinds of paint and coating applications.

The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.