Products in Concrete Coatings & Stains: Water Repellent

SILRES® BS 1360 is a nonionic, solvent-free, water-dilutable emulsion of a reactive polysiloxane. It can be added in undiluted form to aqueous masonry protection agents either during or after their production. Similar to SILRES® BS 1346, SILRES® BS 1360 is used undiluted as a hydrophobizing additive for aqueous masonry paints. Its primary functions are to enhance water repellency, water resistance, water vapor permeability, processability, and anti-blocking properties.

SILRES® BS 1306 is a solventless, water-thinnable emulsion of polysiloxane modified with functional silicone resin. It can also be used as a water-repellent primer, in which case it should be diluted with water at a ratio of 1 part SILRES® BS 1306 to 9 parts water. If the primer is required to strengthen the substrate, we recommend adding a polymer dispersion in hydrosol form.

SILRES® BS 1001 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Dilute solutions of SILRES® BS 1001 serve as high-quality, general-purpose water repellents for impregnating and priming mineral surfaces. SILRES® BS 1001 can be combined with polymer-based primers for substrate consolidation.

SILRES® BS 1310 is a solvent-free, water-thinnable emulsion of polysiloxane modified with functional silicone resin. It is an additive used in the production of aqueous masonry coatings and aqueous primers to enhance water repellency and resistance. Additionally, it improves the processability and antiblocking characteristics of the aqueous coatings.

SILRES® BS 1346 is a nonionic, solvent-free, water-dilutable emulsion of a reactive polysiloxane. It is used in its undiluted form as a hydrophobizing additive for aqueous masonry paints or plasters. Its purpose is to increase water repellency, water resistance, and water vapor permeability while also enhancing processability and antiblocking properties.

SILRES® BS 1340 is a nonionic, solvent-free, waterborne emulsion of a reactive polysiloxane. It is specifically used in the formulation of water-resistant coatings. SILRES® BS 1340 can be directly incorporated, without dilution, into waterborne masonry paints and plasters either during or after their production.

ASCOTRAN® H14 is a multi-metal substrate renowned for its high water-resistance properties.

AquaKlean 403 is an anionic paraffin/polyethylene wax emulsion ideal for cleanability and water repellency in architectural coatings.Features and Benefits Provides excellent initial water beading and long term water repellency. Imparts soil release for improved cleanability. Imparts slip, antiblocking, scratch and abrasion resistance. Wax emulsion particle does not reduce gloss or clarity. Anionic emulsion stabilization contributes to immediate hydrophobicity.

HEXAFOR™ 6282 is a solvent-based methacrylic fluorinated polymer based only on C6 fluorinated chains, that provides a durable and transparent surface trea™ent to a various kind of building materials as Natural Stones, Terra Cotta, Concrete, and Bricks.

LESTAC DP110 is brown to dark brown color thermoplastic granule or flake resin obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. The major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as water repellent agent, concrete curing agent and binder for asphalt.

HEXAFOR™ 6280is a solvent-based methacrylic fluorinated polymer based only on C6 fluorinated chains, that provides a durable and transparent surface trea™ent to a various kind of building materials as Natural Stones, Terra Cotta, Concrete, and Bricks.

LESTAC P120 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

LESTAC P100 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

LESTAC DP100 is brown to dark brown color thermoplastic granular or flake resin obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. The major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as water repellent agent, concrete curing agent and binder for asphalt.

Michem® Emulsion 34935 provides excellent water beading and is primarily used for water resistance in wood coatings.

LESTAC P140 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

LESTAC DCPD100 is pale yellow granular or flake thermoplastic resin obtained from mainly thermo polymerizing unsaturated DCPD derived from the process of thermal cracking of naphtha. The major usages are Adhesive such as pressure-sensitive adhesive, hot-melt adhesive, Coating, Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as water repellent agent, concrete curing agent and binder for asphalt.

Michem® Emulsion 71150 - A stable high solids water-resistant additive for coatings effectively controls concrete curing and provides donnability and release for industrial molding applications.

Michem® Lube 190 - A wax emulsion provides mar, rub, block, and scratch resistance, and improved water resistance in coatings and graphic arts formulations.

HEXAFOR™ 6284 is a solvent-based methacrylic fluorinated polymer based only on C6 fluorinated chains, that provides a durable and transparent surface trea™ent to a various kind of building materials as Natural Stones, Terra Cotta, Concrete, and Bricks.

HEXAFOR™ 6242 is a water-based (meth)acrylic fluorinated polymer based only on C6 fluorinated chains, that provides a durable and transparent surface trea™ent to a various kind of building materials as Natural Stones, Terra Cotta, Concrete, Bricks and (especially) marble. It can be used also for paper trea™ent.

SEI Chemicals WPA-1000 conditions the paint foreasier application and greatly improves thefade resistance properties. This water-basedmicro-emulsion additive increases the life,value and performance of all latex paintsand stains. The SEI Paint Proofer is FREE! The SEI Paint Proofer costs the same as latex paints. When you add the SEI Paint Proofer at 4 paint. with a total volume of 5 parts of water repellent parts paint to 1 part Paint Proofer you end up.

HEXAFOR™ 6232 is a water-based (meth) acrylic fluorinated polymer based only on C6 fluorinated chains, that provides a durable and transparent surface trea™ent to a various kind of building materials as Natural Stones, Terra Cotta, Concrete and Bricks.

NatureShield® 30 contains 99.5% natural ingredients, this additive imparts good water bead to wood and concrete coatings.

LESTAC P110 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

LESTAC DP120 is brown to dark brown color thermoplastic granule or flake resin obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. The major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as water repellent agent, concrete curing agent and binder for asphalt.

HEXAFOR™ 6211 is a water-based (meth)acrylic fluorinated polymer based only on C6 fluorinated chains, that provides a durable and transparent surface trea™ent to a various kind of building materials as Natural Stones, Terra Cotta, Concrete and Bricks.

LESTAC P130 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

Michem® Emulsion 70750 imparts excellent early water resistance and release properties when used as an additive in wood coatings, furniture coatings and other water based coatings when additional water resistant properties are needed.