Products in Concrete Coatings & Stains: Asphalt

Domemul AA 7601 is an acrylic APEO-free emulsion designed for waterborne road marking coatings and paints for metal surfaces. The resin can also be used for fast drying waterborne coatings, also in high humidity and low temperature environments.Features & BenefitsWaterborne road marking coatingsVery fast dryingExellent adhesion on asphalt, concrete, metal

Rovene 5044 is a very soft carboxylated styrene-butadiene emulsion designed for formulation of permanent label and construction adhesives. It is used in the formulation of permanent label and construction adhesives which are high in peel and tack, and thus require a minimum amount of tackifier. Rovene 5044 was designed to give excellent performance and compatibility with a wide variety of tackifiers.

Domacryl 855 60 T is an air drying thermoplastic acrylic resin for the preparation of the pigmented and transparent coatings. This resin is recommended for spray-application paint for road marking, with good adhesion to asphalt, concrete and metal.Features & BenefitsSpray applicationGood adhesion to asphalt, concrete and metal

Domacryl 857 50 BAc is an air drying polyacrylic resin developed for the preparation of the pigmented and transparent coatings for metal. This resin is also recommended for spray-application paint for road marking, rapid drying with good adhesion to asphalt, concrete and metal.Features & BenefitsSpray applicationRapid dryingGood adhesion to asphalt, concrete and metal

Domacryl 856 60 T is an air drying thermoplastic acrylic resin developed for the preparation of the pigmented and transparent coatings with high solid content. This resin is recommended for spray-application paint for road marking, rapid drying with good adhesion to asphalt, concrete and metal.Features & BenefitsSpray applicationGood adhesion to asphalt, concrete and metal

Rovene 6121 is a low glass transition temperature styrene-acrylic polymer that offers flexibility during movement of the substrate and water resistance. Rovene 6121 also exhibits excellent tensile strength and maintains elongation properties when compounded with fillers.

Rovene® 6120 is an all acrylic polymer that offers a balance of properties within elastomeric roof coatings. Rovene 6120 can be formulated to meet or exceed ASTM 6083, Type 1. Rovene® 6120 exhibits adhesion to substrates, balance of stength and flexibility with excellent water resistance.

BarrierPro 4551 is a carboxylated styrene-butadiene emulsion with excellent strength properties, high resistance to liquid water and water vapor, high blush resistance and excellent adhesion to multiple construction substrates. BarrierPro 4551 has excellent stability with dry-add inorganic fillers and sets quickly into a low tack, high strength, water resistant film. BarrierPro 4551 is also a good base polymer for blending with other BarrierPro products to allow a membrane to be custom tailored to a specific strength and/or flexibility need.

BarrierPro 4555 is a styrene-butadiene emulsion polymer of low stiffness. It dries to form a soft but tough film. Its softness makes it excellent for water proofing where films must remain flexible at below-freezing temperatures. Features: Highly stable Cured films are tough and flexible below freezing temperatures Cured films have good water resistance Hydrolysis resistant Filler compatible

Rovene 6119 is a low glass transition temperature styrene-acrylic polymer that offers flexibility during movement of the substrate and water resistance. This polymer also exhibits excellent tensile strength and maintains elongation properties when compounded with fillers.

DeVere Chemical Ultra Kote is a superior, metal cross-linked floor finish with 18% solids. It is designed to meet today’s demands for fast drying, high gloss, and low maintenance finishes. Ultra Kote is designed to be buffed once a week or less. Choose this product for super hardness, high wet-look gloss, durability, and slip resistance.

General purpose, penetration asphalt primer used for the preparation of all types of surfaces prior to the application of hot or cold asphalt coatings. 108 Asphalt Primer is a controlled preparation of a highly ductile, soft asphalt in a refined solvent.

Polaroof RAC-OZ™ is a two-component liquid urethane system that incorporates oxazolidone performance enhancements. chemistry. It cures to a reflective state. a rubber-like finish that is outstanding toughness and durability POLAROOF RAC-OZ is an energy supplement. -highly effective waterproofing membrane that is resistant to the spread of fire and is intended for situations in which tensile strength, chemical and oil resistance, and total waterproofness surface area is required.

Deqing Toda Sanfeng Pigment Toda Color TSY-2 is fine micronized yellow iron oxide, easy dispersion type pigments.

Hydro Seal™ 300 formulas represent research and service in protecting buildings since 1970. Hydro Seal 300™ is a versatile, waterborne emulsion, water repellent and stain protector. Hydro Seal 300™ offers fast and effective protection against U.V. damage and stains. Hydro Seal 300™ protects a wide variety of surfaces including masonry, stucco, brick pavers, concrete, aluminum, marble, fabric and asphalt roofs.

Deqing Toda Sanfeng Pigment Toda Color 140 EDS is fine micronized red iron oxide, easy dispersion type pigments.

KARNAK 100 Non-Fibered Primer is a general purpose non-fibered emulsion primer prepared from an asphalt binder, carefully refined and emulsified in water by means of selected colloids. The asphalt emulsion thus produced is of heavy paint consistency. It is especially designed for use as a general utility prime coat for concrete, gypsum, masonry, brick, and metal surfaces over which waterproofing, dampproofing, roof coatings, membranes and other asphaltic products are to be applied. KARNAK 100 Non-Fibered Primer is designed specifically to prepare surfaces for torch-applied modified bitumen membrane, where solvent-based primers are not permitted or applicable. KARNAK 100 Non-Fibered Primer will not burn or support combustion in a liquid state and will not flash. This is a low odor coating that resists the absorption of exterior moisture

ROOFDX GOLD™ is a highly durable, rubberlike waterproofing coating with a stunning golden finish and exceptional elasticity. This remarkable "liquid gold" coating can be applied to all common roofing substrates and will give the roof a golden, metallic, rich luster at a fraction of the cost of gold leaf. ROOFDX GOLD™ can be sealed with a topcoat of CLEARCOAT 44 to provide an extra shiny, brilliant appearance and to maintain the bright finish; otherwise, a natural patina will develop over time.

Deqing Toda Sanfeng Pigment Toda Color TSY-1H is fine micronized yellow iron oxide, easy dispersion type pigments for heat resistance.

ROOFDX SUPER™ is a single-component urethane that has been specifically designed as a waterproofing membrane for all types of roofing. It cures to form a tough, elastic, waterproof seal and can be incorporated into roofing specifications that provide 10 to 20 years of roof protection ROOFDX SUPER™ contains corrosion inhibiting pigments that protect metals from rust and acid rain.

Deqing Toda Sanfeng Pigment Toda Color 100 EDS is fine micronized red iron oxide, easy dispersion type pigments.

Acrylastic™ 600 Deck Coating is a durable, water- base, single component, highly elastic water and weather resistant deck coating. The Acrylastic 600 system is based on superior tech- nology that has a proven track record since 1983. Davlin's proprietary formulation ensures complete UV stability and long-standing weather-ability.

102 Asphalt Primer is a material composed of selected asphalts and refined solvents. It has good resistance to temperature change, yet dries to a tough film. 102 Asphalt Primer provides a firm base and better adhesion for the application of asphalt coatings. 102 Asphalt Primer is not to be used as a roof coating.

PRETIOX RGU is an universal, high quality micronized rutile titanium dioxide with an organic and increased inorganic surfacetreatment with aluminum and silicon compounds, with Al-ion modification in the crystal structure.

KARNAK 298 Alumin-R is a PREMIUM grade, single component, SBS rubber modified asphalt reflective coating specially formulated with aluminum pigment to be used as a reflective elastomeric coating over modified bitumen membranes, BUR asphalt roofs, spray polyurethane foam roofs, properly sloped concrete roofs and metal roofs.

RoofDX Copper­­™ is an extremely tough, metallic, rubberlike, waterproofing coating with a very attractive copper finish that will actually patina due to its composition of copper flakes. This amazing "liquid copper" coating can be applied to any common roofing substrate and will give the appearance of copper sheet roofing at a fraction of the cost. ROOFDX COPPER, like copper sheet, will develop a classic green patina, or it can be sealed with CLEARCOAT 44 to keep its new appearance.

Deqing Toda Sanfeng Pigment Toda Color 134CR is red iron oxide, special type pigments.

Melos PC 11-010 is a solvent free, single-component polyurethane primer. It is designed for the adhesion between asphalt, concrete and elastic layers and between elastic layers (retopping).

Deqing Toda Sanfeng Pigment Toda Color CB-525 is black iron oxide, special type pigments.

Everprime Bleed Block SS is water resistant acrylic base coat for smooth asphalt surfaces.

Deqing Toda Sanfeng Pigment Toda Color 160 EDS is fine micronized red iron oxide, easy dispersion type pigments.

KALMATRON® KF-I is an inorganic, thermoresistant, non-asbestos compound designed for insulation and protection of building structures and equipment from thermal thresholds, acoustic impedance, and primordial ionic environments. Supplied as a white powder to be mixed with water.

Deqing Toda Sanfeng Pigment Toda Color 130 EDS is fine micronized red iron oxide, easy dispersion type pigments.

Deqing Toda Sanfeng Pigment Toda Color Y-50 is yellow iron oxide, special type pigments.

Cactus Industrial PMMA-Based Universal Primer is a solvent-free 2-component methacrylate resin system. It’s used in conjunction with PMMA-Based waterproofing coating, pmma-based self-leveling mortar, pmma-based top coat / sealer coat and anti-slip paint. A high performance multi-surface primer for absorbent and non-absorbent substrates. It delivers excellent adhesion on to concrete, cement screed, asphalt as well as tiles and metals such as untreated steel, stainless steel, aluminum, galvanized sheet metal and other non-absorbent substrates.