Products in Concrete Coatings & Stains: Elastomers & Rubbers

Rovene 6119 is a low glass transition temperature styrene-acrylic polymer that offers flexibility during movement of the substrate and water resistance. This polymer also exhibits excellent tensile strength and maintains elongation properties when compounded with fillers.

SYNTRAN AC 6130 is a modified water-based acrylic copolymer that combines two different ionic structures in the same interpenetrating polymer network (IPN). This technology allows the formulator to take advantage of a cationic acrylic without the traditional compatibility issues as it can be formulated like a conventional anionic water-based acrylate. This unusual combination provides excellent adhesion to a wide range of difficult substrates. Coatings formulated with SYNTRAN® AC 6130 consistently exhibit a lasting toughness and flexibility which provide a superior foundation for many of today’s advanced end products. Features and Benefits: Excellent solvent resistance and abrasion resistance Short drying times High crosslinking density Improved compatibility Low solvent demand Excellent adhesion, hardness and scratch resistance. Very good water and grease resistance. Good resistance to coffee and red wine in white coatings, clear when wet, reddish color on wood in clear coatings.

Rovene® 6120 is an all acrylic polymer that offers a balance of properties within elastomeric roof coatings. Rovene 6120 can be formulated to meet or exceed ASTM 6083, Type 1. Rovene® 6120 exhibits adhesion to substrates, balance of stength and flexibility with excellent water resistance.

Rovene 6121 is a low glass transition temperature styrene-acrylic polymer that offers flexibility during movement of the substrate and water resistance. Rovene 6121 also exhibits excellent tensile strength and maintains elongation properties when compounded with fillers.

An increased reactivity hybrid carboxy/ hydroxyl functional metal organic adhesion promoter synthesized with a stabilized neutralized metal complex. The product is supplied as a solution in water.

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

An amino functional metal organic adhesion promoter synthesized with a stabilized neutralized metal complex. The product is supplied as an aqueous solution.

BarrierPro 4555 is a styrene-butadiene emulsion polymer of low stiffness. It dries to form a soft but tough film. Its softness makes it excellent for water proofing where films must remain flexible at below-freezing temperatures. Features: Highly stable Cured films are tough and flexible below freezing temperatures Cured films have good water resistance Hydrolysis resistant Filler compatible

DeVere Chemical Ultra Kote is a superior, metal cross-linked floor finish with 18% solids. It is designed to meet today’s demands for fast drying, high gloss, and low maintenance finishes. Ultra Kote is designed to be buffed once a week or less. Choose this product for super hardness, high wet-look gloss, durability, and slip resistance.

Deqing Toda Sanfeng Pigment Toda Color TSY-2H is fine micronized yellow iron oxide, easy dispersion type pigments for heat resistance.

Soyanol™ SGE40 is a unique ultra low surfactant emulsion system, it is base for paints, wood and concrete stains or adhesives, it is compatible with standard latex and acrylic resins and compatible with other alkyd dispersion resins. It is low surfactant system improves water resistance and finish. Soy provides oil base performance in waterborne emulsion systems. Many custom blending solutions available that will save you time and money.

Soyanol™ 5000X-HS is viscosity and flow modifier for solvent borne coatings, non-phthalate plasticizer, it is compatible with most conventional resin systems and exempt solvents, provides excellent dispersion characteristics in paints and stains, deep penetration is excellent for wood and concrete applications, it improves leveling, increases open time for better cure rates and smoother finishes and it is more efficient than other options (use less, get more).

Monochem 610 is a pigmented single component, elastomeric aliphatic polyurea coating. It is primarily used as a topcoat over Monochem 310 (base coat) creating a system that displays superior elongation, wear resistance, weathering, UV and chemical protection.

Deqing Toda Sanfeng Pigment Toda Color 140 EDS is fine micronized red iron oxide, easy dispersion type pigments.

Deqing Toda Sanfeng Pigment Toda Color 100 EDS is fine micronized red iron oxide, easy dispersion type pigments.

ROOFDX GOLD™ is a highly durable, rubberlike waterproofing coating with a stunning golden finish and exceptional elasticity. This remarkable "liquid gold" coating can be applied to all common roofing substrates and will give the roof a golden, metallic, rich luster at a fraction of the cost of gold leaf. ROOFDX GOLD™ can be sealed with a topcoat of CLEARCOAT 44 to provide an extra shiny, brilliant appearance and to maintain the bright finish; otherwise, a natural patina will develop over time.

ROOFDX SUPER™ is a single-component urethane that has been specifically designed as a waterproofing membrane for all types of roofing. It cures to form a tough, elastic, waterproof seal and can be incorporated into roofing specifications that provide 10 to 20 years of roof protection ROOFDX SUPER™ contains corrosion inhibiting pigments that protect metals from rust and acid rain.

Deqing Toda Sanfeng Pigment Toda Color TSY-1H is fine micronized yellow iron oxide, easy dispersion type pigments for heat resistance.

Chloride Vinyl Copolymer Resin CMP15 are copolymers of vinyl chloride and vinyl isobutyl ether. They can be used as base resin for air-drying paints or other physical drying paints.

KARNAK 298 Alumin-R is a PREMIUM grade, single component, SBS rubber modified asphalt reflective coating specially formulated with aluminum pigment to be used as a reflective elastomeric coating over modified bitumen membranes, BUR asphalt roofs, spray polyurethane foam roofs, properly sloped concrete roofs and metal roofs.

502 RC-W Elasto-Kote Finish Coat is a highly elastic, reflective thermoplastic rubber, single component, coating to be applied as a finish coat over 502 RC-W Elasto-Kote Base Coat.

Koster VAP I 2000 FS is a one-coat moisture/water vapor reduction system consisting of a unique combination of epoxy resins and other chemical compounds. Koster VAP I 2000 FS is formulated to prevent floor failures on concrete slabs containing elevated levels of moisture vapor emission. Koster VAP I 2000 FS has no upper limits for water vapor emissions; it resists moisture levels (100% RH).

Deqing Toda Sanfeng Pigment Toda Color TSY-1 is fine micronized yellow iron oxide, easy dispersion type pigments.

POLAROOF NW­­™ is a high-quality single-component waterproofing coating for metal roofs, concrete decks, and ponded-water roofs. Because it is solventbased, it can be used in a wide temperature range. POLAROOF NW­­™ can be used as a vapor barrier in cold storage applications. It is intended for long-term flexibility and toughness, as well as the ability to bridge and move with hairline cracks and resist impingement attack.

Deqing Toda Sanfeng Pigment Toda Color CB-525 is black iron oxide, special type pigments.

Deqing Toda Sanfeng Pigment Toda Color 160 EDS is fine micronized red iron oxide, easy dispersion type pigments.

JETSET 100™ Traffic Coating is a low odor, zero VOCs and 100% solids solvent-free, twocomponent epoxy for heavy duty protection. It is designed for new or old concrete or steel. Consult with the manufacturer for additional acceptable substrates. JETSET 100™ is high gloss and chemical resistant.

RoofDX Copper­­™ is an extremely tough, metallic, rubberlike, waterproofing coating with a very attractive copper finish that will actually patina due to its composition of copper flakes. This amazing "liquid copper" coating can be applied to any common roofing substrate and will give the appearance of copper sheet roofing at a fraction of the cost. ROOFDX COPPER, like copper sheet, will develop a classic green patina, or it can be sealed with CLEARCOAT 44 to keep its new appearance.

Cactus Industrial Urethane 80 Rubber Repair And Protection are 2-component polyurethanes that cure at room temperature to tough rubber-like materials, remaining flexible at temperatures down to even -60°C. WEICON Urethanes adhere to a variety of materials such as metals, concrete, rubber, wood, fiberglass and many others. They are also suitable as flexible coatings in connection with WEICON Plastic Metal epoxy systems. Due to their low sensitivity to humidity they can also be used for coatings in thin layers and have a remarkably high tensile and tear strength.

Monochem 21 is a 2-component, 100% solids, high-build, liquid applied, Polyamine, Cyclo-Aliphatic Epoxy. Monochem 21 is available in high gloss, clear, standard colors and can be mixed with decorative chips, color micas, or silica sand. It is designed as a high performance primer, base coat or interior top coat.

Deqing Toda Sanfeng Pigment Toda Color 134CR is red iron oxide, special type pigments.

Deqing Toda Sanfeng Pigment Toda Color TSY-2 is fine micronized yellow iron oxide, easy dispersion type pigments.

ERS-White Roof Coating is a water-based, Energy Star compliant, acrylic coating with high solids and elastomeric properties. It is a highly reflective, permanently flexible “breathing” membrane, allowing moisture vapor from the substrate or building interior to escape while remaining impervious to mass water penetration from the exterior.

Deqing Toda Sanfeng Pigment Toda Color TMC-1 is black iron oxide, special type pigments.

KARNAK 220 Fibered Emulsion is manufactured with refined asphalt, bentonite clay, emulsifiers and fibers for brush or spray application on BUR roofs, modified bitumen membrane roofs, metal and concrete roof surfaces. The dried film cures to a tough, flexible, durable finish and will resist variations in temperature and weather. KARNAK 220 Fibered Emulsion will not burn or support combustion in a liquid state. This is a low odor coating. This coating is a “dead- level” type coating that resists the absorption of exterior moisture.