Products in Concrete Coatings & Stains: Steel

Cardolite® NX - 8101 is an epoxy curing agent based on modified CNSL waterborne technology, recommended for epoxy primers and self-levelers for concrete floors.

Domopol 6115 is a solvent-free polyester and polyether polyol developed for use in the formulation of 2K coatings. With this resin the coatings are tough and flexible, hard-wearing and chemically resistant.Features & BenefitsSolvent-free2K coatingsHard-wearing and chemically resistant coatings

NexSil 85NH4 is an ammonia-stabilized alkaline dispersion of 85 nm colloidal silica at 40% SiO2 concentration in water with low alkali metal levels. The particles are negatively charged. NexSil 85NH4 can be used in a wide variety of applications such as paper, steel and precision polishing applications where large particle size colloidal silica is required.

NexSil™ 85-40 is an alkaline dispersion of 40 - 60 nm colloidal silica at a 40% SiO2 concentration in water. The particles are negatively charged. The product can be used in paper, steel and precision polishing applications where large particle size colloidal silica is required. NexSil 85-40 is a good choice for sapphire polishing and other specialty wafer polishing applications. NexSil 85-40 provides good balance between removal rate and surface finish. Consult NYACOL® for recommendations on starting conditions.

G-249 Epoxy Primer was developed specifically as a preparatory coating for a variety of surfaces including aluminum, steel, concrete, wood and polyester. It is an excellent priming coat for Gryphin DURADECK Non-Skid deck-covering compounds. G-249 Epoxy Primer is a two-part material containing a synthetic resinous binder and an accelerator or curing agent.

POLAROOF NW­­™ is a high-quality single-component waterproofing coating for metal roofs, concrete decks, and ponded-water roofs. Because it is solventbased, it can be used in a wide temperature range. POLAROOF NW­­™ can be used as a vapor barrier in cold storage applications. It is intended for long-term flexibility and toughness, as well as the ability to bridge and move with hairline cracks and resist impingement attack.

AmCoat Industries Rhino Two-component Urethane is a high gloss, acrylic polyurethane coating, comprised of high solids. This two-component urethane coating provide superior weathering and high quality color retention. It is may be tinted to virtually any color. RHINO URETHANE is classified as an industrial urethane coating, designed for harsh environments. Additionally, it offers outstanding resistance to acids, stains and chemicals. RHINO URETHANE is a flexible coating that maintains durability with structure movement.

POLIBRID® 670S is a solventless two component, organo-silane modified, amido-amine epoxy primer designed specifically for applications of POLIBRID solventless elastomeric polyurethane coatings and linings to carbon steel or concrete substrates. POLIBRID 670S utilizes the most advanced technology in moisture-tolerant, flexible epoxy resins, producing tenacious adhesion to the substrate while creating a strong chemical bond to the Polibrid elastomers. Its superior moisture tolerance serves as a barrier to substrate moisture that allows application of the POLIBRID elastomeric polyurethane coating and lining materials over dry or damp concrete surfaces. The use of this primer to damp or wet metallic surfaces is not recommended. POLIBRID 670S is topcoated with the POLIBRID elastomers after it sets up firm, but while still in a tacky condition, using "wet-to-wet" application techniques that enhance adhesion and increase productivity. POLIBRID 670S does not contain tars, lead, zinc or chromates and complies with all known VOC emissions standards.

Warren Paint & Color 100% Solids Clear Epoxy Two Component #E15712/E15713 is formulated to provide extreme resistance to water, alcohol, and other chemicals. It may be used in aggressive environments for long-term protection of steel and concrete. 100% Solids Clear Epoxy is well suited for decoupage on bar tops, table tops, or as a clear finish over other interior wood and concrete surfaces. It may be applied up to 1/4" per pour for a coating with tremendous "depth." 100% Solids Clear Epoxy should not be used as an exterior topcoat.

Warren Paint & Color White Polyamide High Gloss Epoxy Two Component Epoxy # NE 4085/ E 4005 is formulated to provide extreme resistance to corrosion, acids, alkalis, solvents, and other chemicals. It may be used in a marine environment for long term protection of steel and concrete. White Polyamide High Gloss Epoxy is available in white and gray with high build, semi-gloss, and special colors available by special order.

G-1191 Non-Skid is a lightweight, non-slip floor and deck covering compound developed for use over aluminum, steel, wood, concrete or polyester. This material is used on areas subject to foot traffic in confined spaces. It is long wearing with a hard, non-porous surface and is resistant to extreme temperatures. G-1191 Non-Skid contains a synthetic, resinous binder and abrasive particles. Because it is water-based, it is easy to apply, especially in areas where solvents are a problem.

Cactus Industrial Epoxy Surface And Wet Tolerant Protective Coating is a high-performance solvent-free, two-pack epoxy mastic designed to provide corrosion resistance and abrasion protection in extreme service applications. This specially designed epoxy system is capable of application and curing underwater and form a tough protective barrier. It provides outstanding adhesion on wet blasted surfaces.

ConoGlaze™ Chemical & Food 202 is a chemically-resistant, 100% solids, epoxy coating system. It is used as a topcoat for Sauereisen ConoCrete or FibreCrete systems or as a coating to protect concrete and steel from chemical attack.

UNITHANE IC-151 NF is an anionic APEO free dispersion of an aliphatic polyester-based urethane in water using a co-colvent of Dipropylene glycol dimethyl ether (CAS#111109-77-4). UNITHANE IC-151 NF is designed for industrial coating applications requiring good gloss, chemical resistance and adhesion to a variety of substrates.

Type 5GP™ cementitious fireproofing is spray-applied to structural components of buildings for fire resistance when standard density protection is desired. Underwriters Laboratories fire test results have qualified it for use in over 100 designs.

WB-300 Series Clear is a water based coating for good protection of steel pipe. It can be applied over lightly rusted pipe, new and reconditioned pipe.

Consolidated Coatings Leather Jacket Enamel 72-0800 is a high quality alkyd, high gloss enamel with a higher-than-, average solids content. gloss level 85 to 95. excellent hiding,, very durable, flexible, excellent weathering, and water, resistance. leatherjacket forms a rust resistant finish that can, be applied directly to metal. some cases may require a primer, for additional corrosion protection.,.

Protal 600 CTE™ is a two-part high build coal tar epoxy, that can applied as a single or two-coat system. It is a polyamide with excellent abrasion and chemical resistance.

Akuabrid HM 6552A has excellent hydrolysis resistance, excellent eub resistance, high surface hardness, good mechanical property and good solvent resistance.

BB-110 Pile Paint is a coating with a wide DFT range and a tough, flexible high-melt asphalt solution that protects from 50 to 110°F (no heating required). The specially formulated makeup makes these coatings perfect for use on highway piles and related projects. BB-110 Pile Paint has a special high solids (60% by volume), low VOC content (less than 2.9 pounds per gallon). They're easy to brush, roll on, or spray, making application easy for your crew. A single package comes with no on site mixing with other components it's ready to use out of the can.

Vosschemie Benelux EPS Epoxy BN A+B is a solvent free epoxy system suitable as a coating or casting resin on various surfaces. It hardens to a tack free surface. BN EPOXY is self leveling, pigmented and slightly filled.

AMP-UP™ 100 Self-Healing Primer is compatible with AMP-UP™ ACRYLIC, AMP-UP™ URETHANE, and AMP-UP™ PROSHIELD to provide a comprehensive protective coating system. AMP-UP™ 100 Self-Healing Primer can be used for indoor or outdoor applications and performs better than two-component solvent-borne primers in similar environments. In addition, AMP-UP™ 100 Self-Healing Primer comes in a one component package, is easily applied by spray, roller or brush, is easy to clean up, has low odor and low VOC and is environmentally friendly

ROOFDX SUPER™ is a single-component urethane that has been specifically designed as a waterproofing membrane for all types of roofing. It cures to form a tough, elastic, waterproof seal and can be incorporated into roofing specifications that provide 10 to 20 years of roof protection ROOFDX SUPER™ contains corrosion inhibiting pigments that protect metals from rust and acid rain.

Akuabrid HM 2124 has good hydrolysis resistance and good mechanical property.

SAUEREISEN Fast-Trak NovolaK Glaze 229 is a coating system specifically designed to protect concrete, steel or masonry surfaces in the pulp & paper industry. FastTrak has the chemical resistance to withstand bleaches, liquors and other corrosive substances that attack unprotected trenches, sumps and chests in paper mills. Depending on the chemical and temperature environment, Fast-Trak is available in either vinyl ester or novolak epoxy formulations which are used with an appropriate Sauereisen Primer.

ConoGlaze Abrasion Resistance 207 is a resin-based, impermeable corrosion barrier for use as stand-alone coatings or high-gloss sealants over other materials. Typical application thickness is 8 mils or more.

BB-99 Bituminous Black Pipe Coating is a tough, durable coating for lasting protection of steel pipe. The pipe coating is effective for both indoor and outdoor storage. It can be applied to new and reconditioned pipe. When applied over light rust it will stop further deterioration. For shop application only. Not for architectural use.

NexSil 6 is an alkaline dispersion of 6 nm colloidal silica at a 16-18% SiO2 concentration in water. The particles are negatively charged and have a high surface area. NexSil 6 can be used in paper, steel, and precision polishing applications where a very small particle size colloidal silica is required.

Permalac Original is our best-selling, air-dry acrylic lacquer for interior and exterior use.

Type 5EF cementitious fireproofing is spray-applied to structural components of buildings for fire resistance when standard density protection of electrified floors is required. Underwriters Laboratories fire test results have qualified it for use in over 100 designs.

PRECIDIUM™ P180D Primer is a solvent-free, zero VOC, two-component urethane primer designed for use as an adhesion primer with fast-set systems. It can be top coated in as little as 3 hours (depending on catalyst level and temperature), eliminating overnight cure times experienced with conventional primers. It significantly improves the adhesion and corrosion resistance of polyurea and polyurethane fast-set elastomers.

CHEM-PRIME is a two component, solvent-free epoxy resin based primer. Both resin and hardener components are formulated to promote an excellent adhesion.

Stifel GC is a single component, water based, silane sealer for horizontal and vertical concrete, brick masonry and concrete masonry surfaces.

Permalac NT Rose Gold Matte is an air-dry, transparent, rose gold-colored acrylic lacquer for interior and exterior use.