Products in Decorative Paints: 1K (1 component) Coating

Tinuvin® 5248 is a liquid light stabilizer blend incorporating a triazine-based UV absorber and a basic hindered amine light stabilizer (HALS) for coatings, adhesives, and sealants. Formulated to address the high performance and durability needs of exterior solvent-based automotive, industrial, architectural, and decorative coatings, including energy-curable systems (UV, electron beam). Key features and benefits include high thermal stability and photo permanence, containing a basic multipurpose HALS, a UV absorber insensitive to metal ions and amines, preventing the formation of colored complexes, and a synergistic combination providing superior coating protection against gloss reduction, cracking, blistering, delamination, or color change, ensuring comprehensive substrate protection.

HALOX® 570 is an organic corrosion inhibitor designed for use in waterborne industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. HALOX® 570 is especially effective along weld seams and, in some cases, can also be used in solvent-based coatings and UV-cured systems. HALOX® 570 may be used in formulations based on waterborne acrylic latexes and co-polymers, styrene/acrylic latexes, acrylate epoxy esters, 2-pack epoxy systems, alkyds, alkyd/acrylic blends, and 1 or 2-pack polyurethane. HALOX® 570 may be used in both waterborne primers and direct-to-metal topcoats. In direct-to-metal coatings, HALOX® 570 has a minimal effect on gloss reduction.

HALOX® 570 LS is a ready-to-use liquid version of our popular organic corrosion inhibitor, HALOX® 570, which requires no dilution. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is especially effective along weld seams to prevent galvanic corrosion. HALOX® 570 LS may be used in formulations based on water-based acrylics, epoxy esters, 2-component epoxy, water-reducible alkyds, and water-based polyurethanes. HALOX® 570 LS may be used in both water-based primers and direct-to-metal topcoats. In direct-to-metal coatings, HALOX® 570 LS has a minimal effect on gloss reduction.

Dragonsorb® 5151 is a mixture of benzotriazole UVA with HALS light stabilizer. This liquid light stabilizer blend is developed specifically for coatings. Its high thermal stability and permanence make it suitable for coatings exposed to high bake temperatures and/or extreme environmental conditions. Its broad UV absorbance allows effective protection of light-sensitive substrates such as wood and plastics.

PerformaSil™ 100 SWBE provides superior application, clean-up, functionality, and a sustainability factor that the entire formulation and manufacturing pipeline benefits from, including additive manufacturers, coating manufacturers, coating application contractors, end-users, and ultimately the environment. This product can be used in the formulation of ambient cure or bake coatings for a wide range of substrates such as masonry, glass, leather, fabric, textiles, and metals. It exhibits outstanding weather, water, and solvent resistance making it an excellent candidate for exterior coatings in harsh weather conditions.

Cimsil® A55G is a thixotropic powder additive developed for use in cement, lime, and gypsum systems. It is designed to improve properties in both fresh and hardened states of mortars and concrete systems, offering low dust and enhancing workability.

ECOTINT® HC VIOLET A5-V colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® FACADE GREEN OXIDE G5 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC COBALT BLUE C1-BO are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® FACADE IR BLACK S3 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® BIVA YELLOW YX1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® BLUE BL3 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC GREEN B5-G are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® ULTRAMARINE BLUE BX2 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC MAGENTA A4-P colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC ORANGE A2-O colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC OXIDE RED B3-RO colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® RED SCARLET RHF are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® RED OXIDE RX1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC WHITE B6-WO colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® MAGENTA MG1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC RED A3-R colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC BIVA YELLOW C2-YO colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® VIOLET VL1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC BLUE B4-B are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® YELLOW YE2 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® BLACK BK1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® RED OXIDE RX2 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® RED RD1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

Domemul AA 9674 is a self-crosslinking APEO-free acrylic emulsion with OH-functionality designed for industrial waterborne wood coatings for interior, 1K and 2K wood varnishes. This resin is specially recommended for furniture and joinery, non-yellowing enamels.Features & BenefitsSelfcrosslinking emulsion with free hydroxyl groupsExcellent adhesion on woodApeo freeGood water, chemical and blocking resistance

ECOTINT® FACADE WHITE W1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC YELLOW B1-Y colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® GREEN GR1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® YELLOW OXIDE YX3 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® FACADE YELLOW OXIDE Y1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® ORANGE OXIDE YOX are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.