Products in Decorative Paints: Steel

Domalkyd 0545 40 Wa is a PU modified alkyd emulsion without organic solvents designed for yellowing-resistant top coats and onecoat paints for industrial application (air and forced drying) on wood, steel and aluminum with excellent gloss retention and elasticity. This resin contains no emulsifiers and may be thinned with water at all ratios. Coating systems based on Domalkyd 0545 40 Wa exhibit very rapid physical drying. The bio-based content is 60% (47% of the dry matter by the Carbon-14 method and an additional 13% via a biomass balance (BMB) approach as certified by the ISCC PLUS).Features & Benefits60% biobased on solid contentSolvent freeRapid air dryingHigh glossGood water and chemical resistance

Domalkyd 0460 38 Wa/MP is an acrylic modified alkyd emulsion with low-yellowing properties and a low VOC content. The resin is designed for decorative top coats and primers on wood or steel substrates. It can also be used for industrial anticorrosive paints. However, careful consideration of pigment compatibility is advised. The bio-based content is 79% (62% of the dry matter by the Carbon-14 method and an additional 17% via a biomass balance (BMB) approach as certified by the ISCC PLUS).Features & Benefits79% biobased on solid contentFast air dryingHigh glossExcellent flow

Domalkyd 0461 38 Wa/MP is a styrene-free acrylic modified alkyd emulsion with low-yellowing properties and a low VOC content. The resin is designed for decorative top coats and primers on wood or steel substrates. It can also be used for the industrial anticorrosive paints. However, careful consideration of pigment compatibility is advised. The bio-based content is 75% (59% of the dry matter by the Carbon-14 method and an additional 16% via a biomass balance (BMB) approach as certified by the ISCC PLUS).Features & Benefits75% biobased on solid contentFast air dryingHigh glossExcellent flow

Domopol 5172 55 SAB/MPA ND is a saturated polyester resin recommended for can coatings such as metal decorating enamels. In coil coatings, the resin can be used for topcoats in interior architecture. The bio-based content is 25% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits25% biobased on solid contentCan and coil coatingsAppliance finishingPrimers for HDGPrimers for aluminum

Domalkyd 7625 60 D-40 is an alkyd resin modified with aromatic urethane (TDI) developed for universal finishes for wood, specially recommended for floors, boats and furniture.Features & BenefitsGives excellent anticorrosion primersRapid dryingGood chemical and water resistance

Domopol 9010 40 SAB/ DBE ND is a high molecular weight polyester resin developed for metal decorating enamels or interior can coatings and coil coating primers for HDG steel or aluminum. The bio-based content is 27% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits27% biobased on solid contentCorrosion resistanceAdhesion on HDG steelMetal decorating enamelsCan and coil coatings

Domopol 9030 35% is a high molecular weight polyester resin designed for metal decorating enamels or interior can coatings and coil coating primers for HDG steel or aluminum. The main properties of this resin are flexibility, adhesion to HDG and aluminum and corrosion resistance. The bio-based content is 28% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits28% biobased on solid contentAdhesion promoterElastification resinCan and coil coatings

Domopol 5169 50 SAB/DBE ND is a saturated polyester resin recommended for primers for hot dip galvanized steel and aluminum. This resin can also be used in coil coating onecoat systems, appliance finishing and for metal decorating enamels. The bio-based content is 24% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits24% biobased on solid contentPrimers for HDGOnecoat systemMetal decorating enamels

NexSil™ 85-40 is an alkaline dispersion of 40 - 60 nm colloidal silica at a 40% SiO2 concentration in water. The particles are negatively charged. The product can be used in paper, steel and precision polishing applications where large particle size colloidal silica is required. NexSil 85-40 is a good choice for sapphire polishing and other specialty wafer polishing applications. NexSil 85-40 provides good balance between removal rate and surface finish. Consult NYACOL® for recommendations on starting conditions.

GL3303 is wdely used for Quick drying, good film fullness, and excellent weather resistance, corrosion resistance, yellow degeneration for enamel paint, decorative steel structure.

NexSil 6 is an alkaline dispersion of 6 nm colloidal silica at a 16-18% SiO2 concentration in water. The particles are negatively charged and have a high surface area. NexSil 6 can be used in paper, steel, and precision polishing applications where a very small particle size colloidal silica is required.

Habicor® CP 4295 is a Orthophosphates and Polyphosphates, Chemical Structure is Chromium(III) phosphate.

Habicor® ZN is a Zinc phosphate based anticorrosive pigment. Chemical Structure is Organic modified basic zinc phosphate.

Nigtas 20 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Road Marking Paints, Epoxy Paints.

Nigtas 5 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Long Oil Synthetic Paints, Rapit based Industrial Paints, Short Oil Cellulosic Paints, Marine Paints, Furniture Paints, Epoxy Paints, Printing Inks, Static Powder Coatings.

RARPOLYOL AP-1608 XL is a excellent fast drying acrylic polyol resin with very good weathering resistance and excellent mechanical & adhesion properties.

Teda Golone Chemical GL3305 has a excellent color retention, excellent resistance to yellowing, good flexibility and it is suitable for primer, paint, steel structure and a half and full light mixed paint.

MICA-SOFT® 30 is a wet-ground silky pure mica small flakes.

Nigtas 10 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Epoxy Paints, Marine Paints, Epoxy Paints, Static Powder Coatings.

GL3305-75 is a Pigment dispersion, good resistance to water and it is suitable for primer, paint, steel structure and a half and full light mixed paint.