Products in Building & Construction: Monomer

Bisomer® BZMA (Benzyl Methacrylate) is a low viscosity mono-functional monomer suitable for a wide range of applications.

UVP 0301 is an aliphatic trifunctional acrylate of low viscosity and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an effective reactive diluent with excellent solvency and viscosity reducing characteristics in UV/EB curable formulations based on epoxy,

Meracryl™ HPMA 98 is a functional monomer that can copolymerize with other monomers to produce copolymers with a hydroxy group in the side chain. Hydroxyesters are recommended for heat or room temperature cured coatings with permanent marring and solvent resistance, high gloss retention and weatherability.

UVP 0104 99 is a clear liquid with low viscosity and good solvency.

Bisomer® HPMA (Hydroxpropyl Methacrylate) is a hydroxyl functional methacrylate monomer.

Photomer® 4035 is a monofunctional aromatic acrylate of low viscosity, moderate odor and good cure speed. Due to the Monofunctional character of its backbone, it has been found useful as a flexibilizer and as an adhesion promoter. Photomer® 4035 is recommended for use in UV/EB curable screen, flexographic inks, clear coatings and lacquers.

PHOTOMER® 4808 is a low viscosity, monofunctional acrylated monomer/reactive diluent, for use in radical initiated UV radiation cured coatings, inks and adhesives. PHOTOMER® 4808 has a hydrophobic backbone and exhibits good flexibility and excellent adhesion on non-polar substrates.

Photomer® 4061 TF is a difunctional acrylate of low viscosity, low odor and moderate skin irritancy. A reactive monomer with good cure response, it forms films that are pliable, hard and glossy.

Bisomer® PPM5 LI is a hydroxyl functional methacrylate monomer.

PHOTOMER® 4012 (IBOA) is a very low viscosity monofunctional acrylated monomer which can be polymerized in the presence of free radicals. It is typically used in UV and EB curable applications.

MM-290 is a liquid mono-functional acrylate monomer. It has similar properties as Isobornyl Acrylate (IBOA) when polymerized but with lower weight loss on cure. It has a mild, pleasant odor. MM-290 has good resistance to hydrolysis.

PHOTOMER® 4226 (DPGDA) is an aliphatic difunctional acrylate of low viscosity used as diluent for UV and EB radiation curable formulations.

MERACRYL™ GMAA is used as building block in applications like paints, dispersions or construction chemicals. It confers specific properties, such as improved freeze-thaw resistance, colloidal stability in emulsion, and enhanced film adhesion.

Photomer® 4157 is a medium molecular weight analog of ethoxylated TMPTA. It exhibits good hydrophilicity due to its increased ethoxylate content and thus provides an excellent starting point for developing water dispersible UV/ EB curable inks and coatings.

PHOTOMER® 4017 TF (HDDA) is a low viscosity diluent for UV and EB radiation curable lacquers and pigmented coatings, used in paper and board coatings, wood finishes vinyl flooring and flexible vinyl.

PHOTOMER® 4600 is a medium viscosity mixture of penta-acrylate and hexa-acrylate monomer for UV/EB curable coatings and inks on paper, foil, wood and plastic substrates. It imparts excellent abrasion and scratch resistance as well as fast cure response when formulated into UV/EB curable applications.

Bisomer® EP100DMA is the dimethacrylate ester of a specifically designed block polyalkylene glycol.

FONTAINE SHAN Cyclic Trimethylolpropane Formal Acrylate CTFA is a low viscosity monofunctional acrylate monomer that is used in a variety of UV/EB-cured applications, including inks, wood coatings, stereolithography, and photopolymer printing plates.

MERACRYL™ MMA is used as building blocks in a wide range of applications. It provides very good exterior durability and color stability.It has a glass Tg of 105 °C, and is used wherever hardness and thermo-mechanical stability is needed.

Photomer® 4028 exhibits moderately low viscosity, low odor, excellent cure speed and low irritancy. It contributes towards good adhesion, scuff and abrasion resistance properties in UV and EB curable formulations.

PHOTOMER® 4810 is used as mono functional monomer used as a flexibilizing agent in UV Radcure coatings and inks.

Bisomer® PEM6 LD is a hydroxyl functional methacrylate monomer.

PHOTOMER® 4127 (NPGPODA) is a low viscosity monomer used to dilute oligomers. It exhibits a low surface tension and very good wetting properties. It is particularly suitable for use in UV/EB curable varnishes for industrial uses, graphic arts, as well as screen printing, flexo and other inks on metal, paper/paperboard, plastic and on wood.

Bisomer® PEG200DMA is a low viscosity aliphatic dimethacrylate monomer ideally used as a co-monomer for improving mechanical properties and chemical resistance.