Products in Building & Construction: Solventless & High Solids Coating

Saturated polyester containing hydroxyl groups, modified with a non-drying fatty acids.

Tallicin® 1505 is used as a post-add to provide good flow, leveling and gloss characteristics, Tallicin® 1505 also is effective at wetting and dispersing pigments. Tallicin® 1505 promotes film integrity, markedly improves enamel holdout, helps eliminate brush marks and promotes good gloss.

Tru-Motion™ H3168 is a 100% solids, aliphatic isocyanate based, moisture cure binder for use in construction of bonded rubber granule type running tracks, athletic and safety surfaces. Tru-Motion H3168 exhibits reactivity and cure rates similar to those of MDI-based binders, resulting in installation and handling characteristics typical of these systems. Tru-Motion™ H3168 exhibits excellent color fastness and exterior durability allowing the use of light-colored EPDM granules without the objectionable yellowing encountered when using MDI and TDI binders. In addition, Tru-Motion™ H3168 exhibits improved resistance to deterioration by water and pool chemicals, making it the surfacing material of choice in areas subject to water and chemical immersion.

Duramac® HS 57-5819 is a high solids chlorinated alkyd used for interior fire retardant coatings. It can be formulated to meet government specification DOD-E-24607A chlorinated alkyd interior semigloss enamel. Manufactured in North America.

CORONATE HXLV is HDI based modified polyisocyanate, containing isocyanurate, Approximately 100 % solid content. Hardener for two-component, non-yellowing type of polyurethane paints with excellent weathering ability.

CARDAMINE H 741 is one of a series of specially formulated phenalkamine curing agents developed for use with liquid and solid epoxy resins. This grade is solvent free although solution versions are available for ease of handling. CARDAMINE H741 is characterized by tolerant mix ratio, excellent hydrophobic character and subsequent corrosion resistance, good cure at low temperature and under adverse conditions with a high degree of flexibility and toughness.

Paladin Paints & Chemicals PPA 7040 is Epoxy Curing Agent.

Zeeospheres Ceramics N-600 is unique dark gray-colored, fine particle size, high-strength microspheres. It is opaque to visible light, but transparent to UV light. The product is typically to reduce VOC levels, increase filler loadings, improve hardness, and add burnish, scrub and abrasion resistance to a variety of coating formulations. It is typically used when color is not important in the applications.

KemaPox HF 020 is cycloaliphatic diamine-isophorone diamine, a high-performance hardener for liquid, solvent-free epoxy resins, and is used together with other hardener components to formulate with corresponding epoxy-system as a wide range of products.

BECKOSOL® 10-539 is a high-solids, long-oil alkyd developed for use in VOC-compliant architectural enamels, maintenance coatings, and metal primers.

UNITHANE HS-1007 is a high solids, solvent free, APEO free waterbased polyurethane dispersion with superior flexibility and recovery properties. UNITHANE HS-1007 is designed for both interior and exterior industrial coating applications requiring flexibility, adhesion and hydrolysis resistance.

KİSAMİD® 1033 is a modified cycloaliphatic polyamine that is High chemical resistance, used in SF coatings and floorings, transparent varnishes.

Incozol 2 acts as an effective moisture scavenger in polyurethane coatings. It is used to eliminate moisture from solvents, polyols and prepolymers and also from plasticisers and pigments. It removes residual moisture from the formulation and prevents bubbling and downglossing caused by high moisture levels either on the substrate or from the atmosphere. Incozol 2 is used in one or two component systems but is not generally recommended in one component systems with a low NCO content.

Silblock™ F Polysiloxane Emulsion is a waterborne, solvent-free, polysiloxane additive for use in waterborne paint formulations to enhance performance and durability. It is an excellent candidate to consider for use in exterior and interior architectural paints. Paints containing Silblock F emulsion typically demonstrate improved resistance to UV, water, alkali and efflorescence. Additionally, durability of color retention and water resistance can be extended by 50% or more. Silblock F emulsion can be added during paint manufacturing or premixed with the existing binder emulsion.

Tru-Motion™ H3617 is the fastest reacting aliphatic binder in the Tru-Motion aliphatic series. It is designed for installation at low temperature and low humidity. Tru-Motion H3617 is not appropriate for use at high temperatures. Tru-Motion H3617 exhibits excellent color fastness and exterior durability allowing the use of light-colored EPDM granules without the objectionable yellowing encountered when using MDI and TDI binders. In addition, Tru-Motion H3617 exhibits improved resistance to deterioration by water and pool chemicals, making it the surfacing material of choice in areas subject to water and chemical immersion.

IMI Fabi HTP3 is used as Primers - General industry Anticorrosion - Wood pigmented.

PAT-ADD DA 948 is a 100% polymeric dispersing agent for use in industrial solvent-free paints, sealants and pigment concentrates. The product is specially designed for use in EPand PUR floorings, systems based on polyols, UPR (unsaturated polyester) or thermoplastics, such as used in, PUR foams, plastisols and gel coats Using PAT-ADD DA 948 in pigment concentrates results in low viscosity, enabling higher pigment loadings, at optimal pigment dispersion.

CamCure 2043 by Champion Advanced Materials (Singhania Group) is cycloaliphatic amine. It acts as a hardener. CamCure 2043 is suitable for use in solvent-free coatings and self-level flooring.

Polyisocyanate crosslinkable „high-solid“ Acrylic resin

When your application calls for a general purpose hardener at low temperatures, Amirez 148/024 exceeds all performance expectations, meeting every specification requirement with speed and a greater degree of technical excellence. This low viscosity, fast cure waterborne reactive polyamide adduct has all application angles covered, from floor and wall painting to hygiene coatings.

CARDAMINE H 640 is one of a series of specially formulated phenalkamine curing agents developed for use with liquid and solid epoxy resins. [this grade is solvent free] CARDAMINE H640 is characterized by good reactivity and tolerant mix ratio, excellent hydrophobic character and subsequent corrosion resistance, good cure at low temperature and under adverse conditions with a high degree of flexibility and toughness.

Carbamac® HS 57-5794 is a high solids oil-modified urethane designed for interior trade sales applications that require a VOC of less than 350 g/l 2.9 lbs/gal . Coatings based on this resin offer a good balance of properties that includes high gloss, excellent flexibility, good hardness and abrasion resistance, and good air-dry rate. Manufactured in North America.

AG 140 is a low viscosity high reactivity phenalkamine epoxy hardener designed for high solids coatings.

CeTePox® 182 R is a reactive diluted Bisphenol A liquid resin, which has a low viscosity.

Tru-Motion™ H3609 is a 100% solids, aliphatic isocyanate based, moisture cure binder for use in the construction of Aquatic Surfaces using polyolefin granules. Tru-Motion™ H3609 exhibits excellent color fastness and exterior durability allowing use of light-colored polyolefin granules without the objectionable yellowing encountered when using MDI and TDI binders.

Mason Color Works Cobalt Titanate Green Spinel - 7250 Green 50 is a high-performance cobalt titanate based pigment, is designed to provide outstanding heat resistance, chemical stability and outdoor durability. This mixed metal oxide pigment meets the demanding performance requirements of the military, aerospace and architectural industries. Mason Color 7250 is recommended for all coating formulations requiring the ultimate in chemical, heat and UV durability.

TiONA® 595 is a multipurpose chloride-process rutile titanium dioxide pigment designed to give an outstanding combination of dispersion, opacity, gloss and durability in a wide range of coating applications.

Defoamer for water-based and UV-curing coatings, free of silicone. SCHWEGO foam 6360 shows excellent defoaming action in UV coatings and is also suitable for coatings based on alkyd, polyester, epoxy, PU and acrylate.

Araldite® GZ471X75 is a medium molecular weight epoxy resin based on Bisphenol A as solvent cut 75% in Xylene. Araldite® GZ 471 X 75 yields similar performance than Araldite® GZ 7071 X 75 but due to lower molecular weight the compatibility with insoluble, acrylics and alkyd-amino combinations is improved.

UCOPOL M 602 is a polyurethane primer to be used as highly reactive impregnating and dust binder for absorbent concrete substrates.

CamCoat 2102 by Champion Advanced Materials (Singhania Group) is epoxy resin. It exhibits excellent mechanical properties. CamCoat 2102 is recommended for use in solvent-free coatings and flooring.

x-bond® U 9069 is a bifunctional silane binder. It is a transparent, inorganic-organic high solid curing material. Exhibits scratch- and abrasion resistance with highest UV- and chemical stability. Applications in high-solid coatings, lacquers and solvent containing varnish formulations. Suited for formulation of spray, dip and brush-on paints as well as for fast curing coatings in roller application. Recommended for use in automotive coatings, clear coats, pigmented paints and coatings for plastic, wood or metal.

Polypol 613 has high Solids, excellent hardness, gloss & flexibility and also excellent weather & chemical resistance.

Microblanc 3 is a very fine, extremely white and of high purity, crystalline Calcium Carbonate. The greatest advantage of Microblanc 3 is the re enforcement of the hiding power of paints, this is due to its unique particle size distribution.

Razeen® LR 2302 is a medium viscosity Bisphenol A/F based liquid epoxy resin, with a reduced risk of crystalisation on storage at low temperature.

TRI-REZ® Polyol 1030-90 is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® Polyol 1030- 90 makes it an ideal polyol for formulating high solids and waterborne polyurethane resins.