Products in Building & Construction: Aluminum

Ulmer Weiss 15H is a coarse calcium carbonate powder with a yellow index of 11.0 that is designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paper, paperboard, paints, varnishes, coatings, printing inks, mastics, soaps, detergents, rubber, cleaning mixtures, and polishing mixtures. Ulmer Weiss 15H is a solid powder in appearance with a characteristic odor.

POLAROOF NW­­™ is a high-quality single-component waterproofing coating for metal roofs, concrete decks, and ponded-water roofs. Because it is solventbased, it can be used in a wide temperature range. POLAROOF NW­­™ can be used as a vapor barrier in cold storage applications. It is intended for long-term flexibility and toughness, as well as the ability to bridge and move with hairline cracks and resist impingement attack.

Polybut™ 10 is a low molecular weight conventional polybutene.

Marcoa™ CB226 has high solid content and gloss. It is used in appliance finishing, aluminum coil coating, exterior architecture and can white coating.

SEI Chemicals GCC-100FR - Potable Water is composed of organic chemicals emulsified in water that react with the alkali content of concrete to form a release film that effectively prevents the bonding of the concrete to the form. In addition, the product also contains a high molecular weight, non-reactive, chemically inert ingredient to assist in clean, quick form release and removal. This exclusive combination of physical and chemical reactive components provides a doubly effective separation and the ultimate in form release efficiency. GCC-100 meets maximum VOC content limits for Form Release Compounds as required by the U.S. EPA Architectural Coatings Rule. GCC-100 is biodegradable.

RARPOLYOL AP-1608 XL is a excellent fast drying acrylic polyol resin with very good weathering resistance and excellent mechanical & adhesion properties.

Nepplast® 2001 is an aromatic based 100 % active material and appears in liquid slightly colored, which has an aliphatic structure, is used in formulations which can not support yellowing.

A high build, surface-tolerant, semi-gloss epoxy coating formulated for excellent resistance to corrosive and abrasive environments. This product is available in a wide range of attractive colors and is formulated for excellent adhesion to clean steel, rusted steel, weathered galvanized steel, wood, concrete, and most existing cured coatings. This product meets the requirements of ANSI/AWWA D102- 06 OCS-5 for first coat and intermediate coat and OCS-6 intermediate coat. Complies with U. S. EPA Ozone Transport Commission (OTC) for Volatile Organic Compounds for VOC Emission Standards for industrial maintenance coatings.

Ulmer Weiss KMH is a fine calcium carbonate powder with a yellow index of 11.0 designed for use as a filler, pigment, or mixing agent used in manufacturing processes. Common applications of this product include paper, paperboard, paints, varnishes, coatings, printing inks, mastics, soaps, detergents, rubber, and polishing mixtures. Ulmer Weiss KMH is a solid powder in appearance with a characteristic odor.

Polybut™ 0 is a low molecular weight conventional polybutene.

Permashield 100 is a one-component, water-based, crosslinked acrylic/urethane coating. It exhibits outstanding resistance to harsh environmental conditions, and has exceptional film hardness. Permashield 100 is elastomeric and displays superior resistance to impacts, abrasion, corrosion, UV exposure, hot tire pick-up and household stains and chemicals.

CSL Silicones CSL942 Multi-Surface Primer is a one-component silicone resin in solvent designed to promote the adhesion of silicone sealants to multiple surfaces and substrates. CSL942 is designed to impart optimum silicone sealant adhesion to porous surfaces i.e. concrete, brick, wood, many plastics and metals such as aluminum, steel, copper, brass, etc.

Cardinal ACRYLIC POLYURETHANE 6S00 is a high-performance two-component low VOC solvent-borne Acrylic Polyurethane intermix system designed specifically for the sign paint industry. The system uses bright clean exterior grade pigments with excellent weathering properties. Chemical resistance, flexibility, abrasion resistance and excellent weathering are the key properties. The coating can be applied at three different VOC ranges; 1.0, 2.8 and 3.5 lbs/gal by changing the hardeners and reducers. A system to meet all VOC needs.

Polybut 1800 is a low molecular Weight Conventional Polybutene

Permalac Original Copper Matte is an air-dry, opaque, copper-colored acrylic lacquer for interior and exterior use.

Black Bitumen Paint is a medium viscosity bitumen reduced with a C9-C12 petroleum derived hydrocarbon. It is black in appearance, mobile and compatible as a waterproof protective coating for a wide variety of substrates (iron, steel, lead, zinc, aluminum, asbestos, cement, concrete, stone, wood, felt and brick). When dry, the product forms an odorless and taint-free black film. It can be used for metal protection and overcoating of wood and felt roofing. For large civil projects, it meets the requirements of a highways/civil engineering grade cutback bitumen.

DISPERCEL NC 7010/40 (Dioxazine Violet)is applied in flexographic and rotogravure inks for paper, aluminum and different types of plastic films. Wood lacquers and coatings, cosmetic application (i.e. nail lacquers, etc.)

Polybut™ X7 is a low molecular weight conventional polybutene.

Permalac NT Christmas Gold Matte is an air-dry, transparent, gold-colored acrylic lacquer for interior and exterior use.

MICA-SOFT® 15/12 W is a wet-ground silky pure mica fine powder.

G-501 Epoxy Non-Skid is a lightweight, non-slip deck covering compound developed for use on aluminum, steel, wood, concrete or polyester. This two-part system meets all the requirements of MIL-D-23003 (Ships) Type H. It is designed for use over Gryphin’s G-249 Primer and G-250 Primer. G-501 Epoxy Non-Skid contains a synthetic resinous binder and abrasive particles. It is easy to apply, economical to use and durable.

SiliXan® W 125 is UV stable aliphatic epoxy group containing polymer with nanoscaled silicon dioxide used as binder for the formulation of 5 tos 10 µm thin corrosion protection clear coats for aluminum with high hardness (pencil hardness up to 9H). It's free of aromatics and can be combined with isocyanates and polyols to formulate weather and abrasion resistant wood and industrial coatings with multifunctional properties.

Monochem 21 is a 2-component, 100% solids, high-build, liquid applied, Polyamine, Cyclo-Aliphatic Epoxy. Monochem 21 is available in high gloss, clear, standard colors and can be mixed with decorative chips, color micas, or silica sand. It is designed as a high performance primer, base coat or interior top coat.

Ulmer Weiss XM is a fine calcium carbonate powder with a yellow index of 7.6 that is designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paper, paperboard, paints, varnishes, coatings, printing inks, mastics, soaps, detergents, rubber, and polishing mixtures. Ulmer Weiss XM is a solid powder in appearance with a characteristic odor.

Permalac NT Copper Matte is an air-dry, opaque, copper-colored acrylic lacquer for interior and exterior use.

DISPERCEL NC 4010/40 (Dinitraniline Orange)is applied in flexographic and rotogravure inks for paper, aluminum and different types of plastic films. Wood lacquers and coatings, cosmetic application (i.e. nail lacquers, etc.)

IBA Kimya San. ve Tic. A.S. PE58 is a Qualicoat and GSB approved thermosetting powder coatings based on TGIC free polyester binder system designed for exterior applications. It has very good UV and yellowing resistance. It is designed specifically for architectural applications where color and gloss retention are critical.

3000 Series Icephobic Coatings is icephobic coatings (anti-ice coatings) create a slick, non-stick, hydrophobic surface when applied to steel, fiberglass, aluminum and over most painted surfaces. Water beads up on the coating, much like water beads up on a newly waxed automobile. Since the icephobic coating is anti-stick in nature, the high contact angle of the water pulls the bead of ice that is forming away from the coating so there is little surface area for the ice to attach. It's own weight pulls it off of the paint surface before it has a chance to form into large icicles that can cause harm.

Polybut 190 is a low molecular Weight Conventional Polybutene

Marcoa™ C1223 has flexibility and anti-sterilization. It is used in appliance finishing, aluminum coil coating, exterior architecture, can white coating, deep drawing can white coating, can varnish, aluminum cap and screw-cap coating.

DISPERCEL NC 5056/40 (B-Naphthol)is applied in flexographic and rotogravure inks for paper, aluminum and different types of plastic films. Wood lacquers and coatings, cosmetic application (i.e. nail lacquers, etc.)

G-249 Epoxy Primer was developed specifically as a preparatory coating for a variety of surfaces including aluminum, steel, concrete, wood and polyester. It is an excellent priming coat for Gryphin DURADECK Non-Skid deck-covering compounds. G-249 Epoxy Primer is a two-part material containing a synthetic resinous binder and an accelerator or curing agent.

New Color Chemical Reflective Powder is high-refraction glass beads, High-refraction glass beads (reflective powder) with the main characteristics of reflection. When reflective powder is exposed to light lens , light source it will return light back to the light source along the same light path. The reflection brightness of reflective powder will enable the night time drivers or nighttime workers can see clearly the pedestrian and the barrier goal during at night or in the case of poor vision .Ensure Making night time and low visibility conditions safer for people worldwide.

Juraperle MM is a coarse calcium carbonate powder designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paper, paperboard, paints, varnishes, coatings, printing inks, mastics, soaps, detergents, rubber, cleaning mixtures, and polishing mixtures. Juraperle MM is a solid powder in appearance with a characteristic odor and a loose bulk density of 1.0 g/cm3.

The TE03 Powder coatings are thermosetting paints, which means that when heated, they transform irreversibly into a very hard adherent plastic material with a high index of resistance to most chemical agents, resulting in high-quality coatings in a single layer that can be shiny, satin, matte, textured, granite, transparent, metallic, and so on. Its physical composition is 100 percent dry extract, which can be applied using various electrostatic processes on a variety of supports (metal, glass, ceramics, and so on), followed by a predetermined stuffing.

Marcoa™ CD426 has weatherability and high gloss. It is used in appliance finishing, aluminum coil coating, exterior architecture and can white coating.