Products in Building & Construction: Elastomers & Rubbers

NEVCHEM®250 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic monomers derived from petroleum feedstocks.

POLYTONE™ M 130 is used for improving the film hardness of nitrocellulose and chlorinated rubber paints.

502 RC-W Elasto-Kote Finish Coat is a highly elastic, reflective thermoplastic rubber, single component, coating to be applied as a finish coat over 502 RC-W Elasto-Kote Base Coat.

Long Kou Windstar Chemical H0906 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.

Long Kou Windstar Chemical H0905 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.

Long Kou Windstar Chemical H0902 has heat resistance value of > 300 C and oil absorption value between 30-40. This product is recommended for use in printing inks, paints, and powder coatings.

Koster VAP I 2000 FS is a one-coat moisture/water vapor reduction system consisting of a unique combination of epoxy resins and other chemical compounds. Koster VAP I 2000 FS is formulated to prevent floor failures on concrete slabs containing elevated levels of moisture vapor emission. Koster VAP I 2000 FS has no upper limits for water vapor emissions; it resists moisture levels (100% RH).

Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odor dimethacrylate monomer.

Deqing Toda Sanfeng Pigment Toda Color TSY-1 is fine micronized yellow iron oxide, easy dispersion type pigments.

High strength, APE free colorants with compatibility in a wide variety of conventional, low and zero VOC* water based systems. Easy to use PanTINT 94 Colorants are based on a proprietary combination of surface active agents resulting in exceptional system compatibility. They have little or no effect on viscosity, gloss, cure time, resistance to water spotting or exterior durability. They will not support the growth of microorganisms.

MACRI CHEMICALS TIOX 220 is a very fine powder and has easy dispersibility. It has good hiding power especially at low pigment concentration. TIOX 220 is a rutile titanium dioxide coated with aluminum and silicon. Which is an excellent affinity with all binders both in the aqueous and in the solvent phase.

Nigtas 5 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Long Oil Synthetic Paints, Rapit based Industrial Paints, Short Oil Cellulosic Paints, Marine Paints, Furniture Paints, Epoxy Paints, Printing Inks, Static Powder Coatings.

High strength, APE free colorants with compatibility in a wide variety of conventional, low and zero VOC* water based systems. Easy to use PanTINT 94 Colorants are based on a proprietary combination of surface active agents resulting in exceptional system compatibility. They have little or no effect on viscosity, gloss, cure time, resistance to water spotting or exterior durability. They will not support the growth of microorganisms.

Ulmer Weiss 15H is a coarse calcium carbonate powder with a yellow index of 11.0 that is designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paper, paperboard, paints, varnishes, coatings, printing inks, mastics, soaps, detergents, rubber, cleaning mixtures, and polishing mixtures. Ulmer Weiss 15H is a solid powder in appearance with a characteristic odor.

POLAROOF NW­­™ is a high-quality single-component waterproofing coating for metal roofs, concrete decks, and ponded-water roofs. Because it is solventbased, it can be used in a wide temperature range. POLAROOF NW­­™ can be used as a vapor barrier in cold storage applications. It is intended for long-term flexibility and toughness, as well as the ability to bridge and move with hairline cracks and resist impingement attack.

Prasad International Pigment Orange 34 is recommended for automotive paints, general industrial paints and powder coatings but limited suitability to decorative paints.

MACRI CHEMICALS TIOX 280 is a rutile titanium dioxide coated with aluminum and silicon. Which has Good hiding power especially at low pigment concentration and its very fine powder with easy dispersibility. It also has excellent affinity with all binders both in the aqueous and in the solvent phase.

Ulmer Weiss 1-2 is a fine calcium carbonate granulate designed for use as a filler, pigment, mixing agent, or raw material in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paperboard, paper, detergents, rubber, cleaning mixtures, dyes, pigments, and polishing mixtures. Ulmer Weiss 1-2 is similar to sand or gravel in appearance with a characteristic odor and grain size of 1.0-2.0. This product does not flash and is non flammable.

POLYTONETM K-95 is practically acidless, unsaponifiable Ketone Formaldehyde Resin which is very light in color, has excellent light resistance and show but very slight tendency to solvent retention. Addition of this resin in general improves gloss, hardness, filling, adhesive strength and durability.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

High strength, APE free colorants with compatibility in a wide variety of conventional, low and zero VOC* water based systems. Easy to use PanTINT 94 Colorants are based on a proprietary combination of surface active agents resulting in exceptional system compatibility. They have little or no effect on viscosity, gloss, cure time, resistance to water spotting or exterior durability. They will not support the growth of microorganisms.

SCG Chemicals LP1060P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LPIO6OP is guaranteed its high quality for various applications.

Juraperle 120 is a coarse calcium carbonate powder designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paper, paperboard, detergents, rubber, cleaning mixtures, and polishing mixtures. Juraperle 120 is a solid powder in appearance with a characteristic odor and a loose bulk density of 1.4 g/cm3

HisarCal® St-5 is used in the paper industry. Micronized calcite is used in the production of writing paper, wall paper, and cardboard by adding 15-30% cellulose. Because of its high whiteness, low cost, and other technical properties that it provides to paper, it has entered the paper sector and replaced kaolin in the last ten years all over the world, beginning in Europe.

Super NEVTAC®90 is a thermoplastic low molecular weight, aromatic modified C5 hydrocarbon resin produced by catalytic polymerization of petroleum derived feedstocks.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

Ulmer Weiss KMH is a fine calcium carbonate powder with a yellow index of 11.0 designed for use as a filler, pigment, or mixing agent used in manufacturing processes. Common applications of this product include paper, paperboard, paints, varnishes, coatings, printing inks, mastics, soaps, detergents, rubber, and polishing mixtures. Ulmer Weiss KMH is a solid powder in appearance with a characteristic odor.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

Zhejiang Genky Selong Technology Trans-oxide yellow TY-628 is a transparent iron oxide pigment yellow can be used in automotive coatings, wood coatings, architectural coatings, industrial coatings, powder coatings, art paint, plastics, nylon, rubber, printing ink, cosmetics, tobacco packaging and other packaging coatings.

NEVPENE® 9545 is a low molecular weight, C5 modified C9 liquid hydrocarbon resin produced by catalytic polymerization of aromatic and aliphatic monomers derived from petroleum feedstocks.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

Juraperle LMP is a coarse calcium carbonate powder designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paper, paperboard, detergents, rubber, cleaning mixtures, and polishing mixtures. Juraperle LMP is a solid powder in appearance with a characteristic odor and a loose bulk density of 1.42 g/cm3.

Deqing Toda Sanfeng Pigment Toda Color CB-525 is black iron oxide, special type pigments.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms