Products in Building & Construction: Steel

NSP 107 - 100% Solids Primer is used to promote the adhesion of 900XT Flake Filled High Performance Novolac. Designed to prevent abrasive blasted steel from developing rust bloom prior to the application of the topcoat. For maximum performance from your coating system, this primer should be used on steel in immersion service. All concrete surfaces should be primed regardless of intended service.

Jiangsu Liside Chemical plant VC Copolymer MP15 resin is a chlorinated binder that is used for the manufacturer of physically drying coatings on iron and steel, non-ferrous metal, mineral substrates as well as road marking paints resistant to hydrolysis.

POLYQuik® P-480 is a two-component, aromatic, sprayable, polyurea, elastomeric coating. It is used as a chemical-resistant, waterproof, protective coating for both vertical and horizontal surfaces. It is resistant to corrosion and many chemicals, including hydrogen sulfide, acids and hydrocarbon solvents. Use POLYQuik® P-480 where regular thermal or dynamic movement is expected.

Acrylic resin cross-linking with polyisocyanate

Novolak VEGlaze 472 is a coating used for the chemical-resistant construction of sumps, ducts, containment areas, trenches, walls, and other support columns or bases. VEGlaze may be used as a thin barrier of corrosion resistance or as a topcoat for other Sauereisen vinyl ester linings and polymer concretes. The VEGlaze system utilizes Sauereisen VEPrime No. 550 as a bond enhancing primer.

Eagle Bridges Marathon Chassis Guard 5159 is a Low Gloss Black, water-based, quick-drying, non-flammable direct to metal (DTM) asphalt-derivative protective coating. It is designed to aid in resisting the effects of corrosion and moisture and can be applied to steel or concrete.

K Pro CRS is the highest performance, 100% solids, special blend of chemical and abrasion resistant epoxy resins and hardeners. It is particularly recommended for cold and or damp conditions, since it can cure in temperatures as low as 45°F and under wet conditions. Neat K Pro CRS produces a high gloss, with a low chance of blushing under damp conditions.

Barvy A Laky Primer S 2000 is an anti-corrosion synthetic basic paint. It is a mixture of alkyd resin, fillers and anti-corrosion pigment in an organic solvent solution.

Habicor® CP 4295 is a Orthophosphates and Polyphosphates, Chemical Structure is Chromium(III) phosphate.

Chloride Vinyl Copolymer Resin CMP15 are copolymers of vinyl chloride and vinyl isobutyl ether. They can be used as base resin for air-drying paints or other physical drying paints.

MM-243 Black Bituminous High Build Pipe Coating is a special version of our regular pipe coatings. It is a heavy duty coating that meets AASHTO M243-96 (2004) for field applied coating of corrugated metal structural pipe, pipe-arches and tunnels.

CHEM-POXY GROUT E999 is solvent-free 100% solids, moisture-insensitive three component, ultra-low creep, pumpable, high flow and non-shrink epoxy grout system. It is formulated to be highly flowable for clearances down to 13mm.

Gryphin G-2216 Non-Skid is a two-component, heavy-duty epoxy non-skid coating containing a synthetic resinous binder system and abrasive particles. This material was designed for use over Gryphin G-249 Epoxy Primer or Gryphin G-250 Chelating Primer. This system can be used on steel, aluminum or concrete when a heavy-duty non-skid is required. G-2216 Non-Skid features excellent resistance to oils, grease, hydraulic fluids, detergent solutions, salt water, alcohol, gasoline, and most acids. Because of its excellent resistance to wear and extreme temperature changes, G-2216 Epoxy Non-Skid will provide years of service if properly applied.

POLYSHIELD HT™ TRAFFIC COAT is a state-of-the-art, high-performance, spray-applied, plural-component, purepolyurea elastomer. This system is based on amine-terminated polyether resins, amine chain extenders, and MDIprepolymers. It provides a flexible, resilient, tough, monolithic membrane with water and chemical resistance. Witha 1 minute 30 second tack time, it is excellent for projects that require a broadcast aggregate and/or require a smoothsurface.

Polem A SLR is a two component, solvent free and low emission, self leveling, floor coating which cures to a tough yet soft and elastic material with a hard wearing, easy to maintain surface and a tolerance to a wide range of chemicals. Polem A SLR is supplied ready for use but can be further extended with Quartz.

SAUEREISEN SparkPrime 562 is a single-component, moist-cured urethane primer to be used in conjunction with several Sauereisen coating and lining systems. The function of No. 562 is to promote a tenacious bond of Sauereisen epoxy, vinyl ester and urethane topcoats to concrete and steel substrates.

A high build, surface-tolerant, semi-gloss epoxy coating formulated for excellent resistance to corrosive and abrasive environments. This product is available in a wide range of attractive colors and is formulated for excellent adhesion to clean steel, rusted steel, weathered galvanized steel, wood, concrete, and most existing cured coatings. This product meets the requirements of ANSI/AWWA D102- 06 OCS-5 for first coat and intermediate coat and OCS-6 intermediate coat. Complies with U. S. EPA Ozone Transport Commission (OTC) for Volatile Organic Compounds for VOC Emission Standards for industrial maintenance coatings.

Wilko Paint Wilkopon Rust Inhibitive Primer Wilko No. 347.62 is a two-component rust inhibitive epoxy polyamide coating that is designed for direct application to metals following the removal of loose rust and scale.

CIM® EMT Primer is a two-component solvent-free epoxy primer designed for green and damp porous surfaces such as concrete.

POLYQuik® HPU-1653 is a two-component, aromatic, elastomeric coating with exceptional abrasion and slip resistant properties. It cures quickly and it has excellent adhesion to wood, concrete, geotextile, and steel. POLYQuik® HPU-1653 can be applied under a wide range of climate conditions to form a very durable coating for ramps and various waterproofing applications.

G-501 Epoxy Non-Skid is a lightweight, non-slip deck covering compound developed for use on aluminum, steel, wood, concrete or polyester. This two-part system meets all the requirements of MIL-D-23003 (Ships) Type H. It is designed for use over Gryphin’s G-249 Primer and G-250 Primer. G-501 Epoxy Non-Skid contains a synthetic resinous binder and abrasive particles. It is easy to apply, economical to use and durable.

MICOROX® PVE PRIMER is a single component urethane primer designed to insure the maximum adhesion of polyester and vinylester systems to concrete, steel and other surfaces. Although designed primarily as a primer MICOROX® PVE PRIMER offers superior abrasion and chemical resistance compared to other moisture cured urethanes when used as a concrete sealer.

ERS-Epoxy Corrosion Coating is a high performance, multi-purpose, surface tolerant, two-component chemically-cured epoxy semi-gloss coating.

Xinyu South Wollastonite XYNFW-SA is a typical metamorphic mineral, which has primarily occurred in contact belt between acid rock and limestone, and sometimes occurred in deep metamorphic Calc schist, volcanic product and in some alkaline rock. Wollastonite is a thin plate-like crystal of triclinic crystal system whichbelongs to a chain silicate. Its aggregation is radial or fibrous. Its special crystal structure determines its properties, Wollastonite with the advantage of non-toxic, acid and alkali resistant, low hygroscopicity, low oil absorption, low conductivity, good insulation, high whiteness, thermal stability and dimensional stability good, excellent mechanical properties and electrical characteristics. Wollastonite is a natural green, low carbon emission and energy saving industrial mineral.

WB-300 Series Ghost is a water based coating for good protection of steel pipe. It can be applied over lightly rusted pipe, new and reconditioned pipe.

Rokoemail S 2013 ČSN 1999 is a gloss topcoat available in 24 basic tinted colors ready for immediate use.

Fastpatch™ Polyprime is rapid-setting, acetone-reduced concrete primer is used to create a strong bond between the substrate and topcoat. It can be applied by plural-component proportioner or simple brush/roller.

Permalac NT Copper Matte is an air-dry, opaque, copper-colored acrylic lacquer for interior and exterior use.

3000 Series Icephobic Coatings is icephobic coatings (anti-ice coatings) create a slick, non-stick, hydrophobic surface when applied to steel, fiberglass, aluminum and over most painted surfaces. Water beads up on the coating, much like water beads up on a newly waxed automobile. Since the icephobic coating is anti-stick in nature, the high contact angle of the water pulls the bead of ice that is forming away from the coating so there is little surface area for the ice to attach. It's own weight pulls it off of the paint surface before it has a chance to form into large icicles that can cause harm.

Hallman Lindsay Duratech Premium 100% Acrylic Int/Ext Enamel 318 is a professional grade waterborne acrylic enamel designed for easy application and lasting protection. Streamline on-site maintenance projects with an all-purpose enamel that can be used on interior and exterior trim, doors, handrails, cabinets, or even as a highperformance acrylic wall coating. Drying to an alkyd-like hardness, this low-odor acrylic enamel provides stain and impact resistance that lasts. The 100% acrylic resin creates a durable and flexible coating for long-lasting color protection.

JETSET 100™ Traffic Coating is a low odor, zero VOCs and 100% solids solvent-free, twocomponent epoxy for heavy duty protection. It is designed for new or old concrete or steel. Consult with the manufacturer for additional acceptable substrates. JETSET 100™ is high gloss and chemical resistant.

Tunasresin 4601-65 is Fast dry, good durability, good yellowing resistance & color retention.

DP-505 Dipping Primer is an excellent corrosion resistant primer. This product features excellent pigment suspension and stability properties as required for dip tank operation. It possesses excellent exterior durability and adhesion over most metal, wood and concrete surfaces. Excellent shop applied primer for fabricated steel and structural metal.

Akuabrid HS 019 is a Non-toxic coating of Toy and living supplies and used in Textile, plastic coating.