Products in Building & Construction: Stone

Permalac NT Rose Gold Matte is an air-dry, transparent, rose gold-colored acrylic lacquer for interior and exterior use.

Si-COAT® 532™ Remarkable® Low VOC Anti-Graffiti Protective Coating is a clear, semi-gloss, permanent (non-sacrificial)one coat anti-graffiti protective coating. It is suitable for use over metal, concrete, brick, stone, wood, fiberglass and pre-existing coatings. This single component, room temperature vulcanizing (RTV), moisture cure polysiloxane product provides excellent durability and long service life. As a result of its specific chemistry, Si-COAT 532AG forms chemical bonds with the host surface to enhance adhesion properties without the need for abrasive blasting, priming, and extensive site preparation. Due to the hydrophobicity of the coating, most graffiti-tagging can easily be removed from protected surfaces using water under low pressure. For best results, graffiti tagging should be removed from Si-COAT 532AG as soon as possible using a cold water pressure washer at 1200 psi.

Permalac Original is our best-selling, air-dry acrylic lacquer for interior and exterior use.

Si-COAT® 529™ Remarkable® Pigmented Anti-Graffiti Protective Coating is a pigmented, matte finish, permanent (non-sacrificial) one coat anti-graffiti protective coating suitable for use over metal, concrete, brick, stone, wood, fiberglass and pre-existing coatings. This single component, room temperature vulcanizing (RTV), moisture cure polysiloxane anti-graffiti protective coating provides excellent durability and long service life. As a result of its specific chemistry, it forms chemical bonds with the host surface to enhance adhesion properties without the need for abrasive blasting, priming, and extensive site preparation. Due to the hydrophobicity of the coating, most graffiti tagging can easily be removed from protected surfaces using water under low pressure. For best results, graffiti tagging should be removed from Si-COAT® 529AG as soon as possible using a cold water pressure washer at 1200 psi.

Krystal 25 Emulsion is a state of the art, waterbased, and low VOC, curing & sealing compound. This high quality polymer produces a VOC compliant compound for curing freshly placed concrete. This product provides a quality cure and seal while assuring total resistance to yellowing from ultraviolet exposure. It is particularly suited for concrete where VOC requirements or safety concerns make solvent based systems inappropriate. In addition, this product is unique in that it has built in freeze/thaw protection. While it will solidify if frozen, after thawing and gentle stirring, it will be as good as new. Krystal 25 Emulsion is a UV resistant version of our long famous SureCure 25 Emulsion.

HP-300 Matte/Satin is a 2 component coating system having antimicrobial properties. This product is odorless and non-flammable. Primer is not required and is slip resistant certified.

Permalac Original Semi-Matte is the best-selling, air-dry acrylic lacquer for interior and exterior use. Yields a low satin sheen.

CCM gmbh 697 is used as universal coatings are coatings that are "simple to apply" and have the same "very good" performance qualities on all substrates. However, for the best results, we recommend using our "substrate specific" coatings. The universal coatings are ideal for customers since they are easy to apply and extremely effective.

Si-COAT® 531™ Remarkable® Spray Grade Anti-Graffiti Protective Coating has been formulated as a spray grade alternative to Si-COAT 531AG Remarkable Anti-Graffiti Protective Coating. It is a clear, semi-gloss, permanent (non-sacrificial) single application anti-graffiti protective coating suitable for use over metal, concrete, brick, stone, wood, fiberglass and pre-existing coatings. This single component, room temperature vulcanizing (RTV), moisture cure polysiloxane anti-graffiti protective coating provides excellent durability and long service life. As a result of its specific chemistry, Si-COAT 531AG Remarkable Anti-Graffiti Protective Coating forms chemical bonds with the host surface to enhance adhesion properties without the need for abrasive blasting, priming, and extensive site preparation. Due to the hydrophobicity of the coating, most graffiti tagging can easily be removed from protected surfaces using water under low pressure. For best results, graffiti tagging should be removed from Si-COAT 531AG as soon as possible using a cold water pressure washer at 1200 psi.

Krystal 25 Emulsion EF is a state of the art, water emulsion of 100% pure methyl methacrylate acrylic polymers. This high quality polymer produces a VOC compliant compound for curing freshly placed concrete. This product provides a quality cure and seal while assuring total resistance to yellowing from ultraviolet exposure. It is particularly suited for concrete where VOC requirements or safety concerns make solvent based systems inappropriate In addition, this product is unique in that it has built in freeze/thaw protection. While it will solidify if frozen, after thawing and gentle stirring, it will be as good as new.

Crystal Clear 903X is a heavy viscosity sealer for a variety of masonry surfaces where heavy shine and a deep “wet look” is desired. Fast drying and contains a minimum of 30% solids. For outdoor use only.

HEXAFOR™ 6280is a solvent-based methacrylic fluorinated polymer based only on C6 fluorinated chains, that provides a durable and transparent surface trea™ent to a various kind of building materials as Natural Stones, Terra Cotta, Concrete, and Bricks.

CoatMasters® 2007 NSC-AG is a Siloxane/Silane low VOC formulation, designed for use as a Non-Sacrificial Coating for AntiGraffiti, with an impregnating or penetrating type characteristic. It also functions as a water repellant for treating masonry surfaces. This water-based system, made up of advanced oligomeric silicone-based emulsion mixtures, is suitable for use on various grades of alkaline mineral substrates. This is ideal for treating porous and non-porous building materials of various type surfaces, newly constructed, rehabilitated, or restored type conditions. The product can be applied on precast concrete, clay roof tiles, exterior plaster, calcium silicate brick, light concrete, natural stone, clay brick, and terracotta. CM 2007 NSC-AG is breathable and provides water vapor permeability with resistance to staining and/or color deterioration. Additional benefits include excellent water repellency, minimized spalling, and a low odor for ease of application by brush, roll, flow, and/or spray. Before completely using and applying the product, we recommend checking and evaluating the final color and appearance from a sample substrate for approval. A change in color and sheen may slightly occur, due to the actual porosity of the surface. CM 2007 NSC-AG can be power washed for graffiti removal, please see additional instructions for recommended graffiti removal using power washing equipment. Recommended pressure will depend on the nature of the surface (porous and non-porous) and degree of graffiti to be removed. The results may vary during the cleaning process. IMRAE supplies graffiti cleaners compatible with CM 2007 NSC-AG, please contact the Technical Service Group for assistance.

HEXAFOR™ 6282 is a solvent-based methacrylic fluorinated polymer based only on C6 fluorinated chains, that provides a durable and transparent surface trea™ent to a various kind of building materials as Natural Stones, Terra Cotta, Concrete, and Bricks.

Crystal Clear 951 is a medium viscosity penetrating sealer for stamped concrete, pavers, natural stone, etc. where a low sheen is required. Fast drying and contains a minimum of 15% solids.

Kucryl TPA 77X/60 is a thermoplastic styrene acrylate which has been specifically designed for use in exterior architectural coatings subject to high temperatures and humidity especially where dust/sand pick up on the coating may be problematic. Kucryl TPA 77X/60 is aromatic solvent tolerant and provides coatings with excellent heat, moisture, alkali and fungal resistance. Kucryl TPA 77X/60 has limited compatibility with other film formers.

Ukrsilicate LITIUM 1200 is a representative of the concept of chemical surface hardening. It is an aqueous solution of lithium silicate. Lithium is a clear liquid with shades of yellow, blue, or blue-gray.

CHEM-SEAL 14-WB is a high performance, water based, acrylic sealer and dust proofer with 14% solids content by weight. It is a milky white emulsion, which dries to form a clear semi-gloss to high-gloss film. CHEM-SEAL 14-WB is UV stable and weather resistant. It is designed to protect all indoor and outdoor concrete and masonry surfaces on residential, commercial and light industrial applications.

Permalac NT Christmas Gold Matte is an air-dry, transparent, gold-colored acrylic lacquer for interior and exterior use.

DRYLOK® WetLook Clear High Gloss Penetrating Sealer is a clear, nonyellowing, water-based acrylic coating formulated for use on interior or exterior masonry surfaces. Provides superior hardness and durability. Protects against efflorescence (white, powdery, salt-like deposits) visible on the masonry. Built in flash rust resistance prevents orange staining of surface when applied to masonry containing natural metals. Excellent chemical resistance to de-icing salts. Compatible with polymeric sand.

Bonstone® Historic Restoration Mortar (HRM™) is a two-component, lime-based, latex modified mortar for the restoration of historic masonry structures.

Ecological Coatings Anti-Graffiti Coating and Anti-Graffiti Paint are water-based, green, low voc products, formulated for effective graffiti protection and exhibit high cross-linked densities, non-stick properties and excellent chemical resistance. Graffiti paint, marker and pen sit on the surface of the coating but do not penetrate. Graffiti removal is simple using our Water-based, Non-toxic Graffiti Remover. Our coatings are permanent, so once graffiti spray paint or permanent marker is removed from the surface the coating remains, ready to protect against the next graffiti attack.

HEXAFOR™ 6232 is a water-based (meth) acrylic fluorinated polymer based only on C6 fluorinated chains, that provides a durable and transparent surface trea™ent to a various kind of building materials as Natural Stones, Terra Cotta, Concrete and Bricks.

CCM gmbh 7637 is a high-performance topographical coatings for stone and high quality concrete products, such as wet room walls, monuments, concrete seating in public areas, stone foyer areas etc. Reduces the effects of general surface contamination from water, food stuffs and oils.

Ecological Coatings Anti-Graffiti Coating and Anti-Graffiti Paint are water-based, green, low voc products, formulated for effective graffiti protection and exhibit high cross-linked densities, non-stick properties and excellent chemical resistance. Graffiti paint, marker and pen sit on the surface of the coating but do not penetrate. Graffiti removal is simple using our Water-based, Non-toxic Graffiti Remover. Our coatings are permanent, so once graffiti spray paint or permanent marker is removed from the surface the coating remains, ready to protect against the next graffiti attack.

QC SURPRO WB Matte is a two-part, water-based polyurethane that forms a highsolids coating, QC SURPRO WB (water-based) Matte preserves and protects any above-grade concrete, masonry or stone. QC SURPRO WB Matte is the most durable, chemical-resistant barrier coating of the QC sealers, without the odor typically found in solvent-borne sealers. Formulated to seal and protect concrete and masonry that is subject to heaviest use conditions, QC SURPRO WB Matte is chemically resistant and highly durable.

Ukrsilicate LITIUM 1070 is a representative of the concept of chemical surface hardening. It is an aqueous solution of lithium silicate. Lithium is a clear liquid with shades of yellow, blue, or blue-gray.

Permalac NT Copper Matte is an air-dry, opaque, copper-colored acrylic lacquer for interior and exterior use.

Permalac NT Electrostatic is a clear solvent-borne acrylic lacquer for metals. It has been formulated for electrostatic application.

Crystal Clear Standard X is of medium viscosity. The most popular all around protective sealer for most floor and wall surfaces. Fast drying and contains a minimum of 18% solids. For outdoor use only.

Top Coat Sealer 4150 is a heavy duty high performance, water based acrylic sealer, designed to promote deep penetration and provide long lasting protection to the coated surfaces. AVM Top Coat Sealer 4150 develops outstanding water repellence, has excellent stain, chemical and abrasion resistance properties, and yet, it allows the surface to breathe.

Si-COAT® 530™ Remarkable® Anti-Graffiti Protective Coating is a clear, semi-gloss, permanent (non-sacrificial) one coat anti-graffiti protective coating suitable for use over metal, concrete, brick, stone, wood, fiberglass and pre-existing coatings. This single component, room temperature vulcanizing (RTV), moisture cure polysiloxane anti-graffiti protective coating provides excellent durability and long service life. As a result of its specific chemistry, Si-COAT 530AG forms chemical bonds with the host surface to enhance adhesion properties without the need for abrasive blasting, priming, and extensive site preparation. Due to the hydrophobicity of the coating, most graffiti tagging can easily be removed from protected surfaces using water under low pressure. For best results, graffiti tagging should be removed from Si-COAT 530AG as soon as possible using a cold water pressure washer at 1200 psi.

Tammsweld is a rewettable liquid bonding agent and polymer modifier for concrete and cement mortars. TAMMSWELD is a high film build, ethylene-vinyl acetate copolymer emulsion.

Si-Prime is a water-borne blend of Silanes, Siloxanes and Acrylic for priming bare and previously untreated porous concrete and other mineral substrates. Water repellent, it also helps bind and consolidate weak or powdery surfaces. Being low viscosity Si-Prime penetrates well into the substrate whilst allowing the substrate to breath; and moisture to outgas. Si-Prime equalizes surface porosity allowing even application and reducing paint consumption of subsequent top coats; fully compatible with Klaas Coatings Si-Rex03™ Silicone Resin Emulsion Paint.