Products in Infrastructure, Roads & Paving: Binder & Resin

VINNOL® H 40/43 is a copolymer composed of approximately 66 wt.% vinyl chloride (VC) and approximately 34 wt.% vinyl acetate (VAc). Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes physical drying, resulting in the formation of a film once the solvent in the formulation has evaporated.

VINNOL® H 40/55 is a copolymer comprising approximately 62 wt.% vinyl chloride (VC) and approximately 38 wt.% vinyl acetate (VAc). Its primary application lies in serving as a binder for surface coating compounds and printing inks. Functioning as a thermoplastic, physically drying binder, VINNOL® H 40/55 undergoes film formation once the solvent present in the formulation has evaporated.

VINNOL® H 40/60 is a copolymer composed of approximately 61 wt.% vinyl chloride (VC) and approximately 39 wt.% vinyl acetate (VAc). Primarily, it serves as a binder for surface coating compounds and printing inks. As a thermoplastic binder, VINNOL® H 40/60 undergoes physical drying, resulting in the formation of a film as the solvent in the formulation evaporates.

VINNOL® H 40/50 is a copolymer composed of approximately 63 wt.% vinyl chloride (VC) and approximately 37 wt.% vinyl acetate (VAc). Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes physical drying, resulting in the formation of a film as the solvent within the formulation evaporates.

Flytac 192 is a water-white thermoplastic resin obtained from the polymerization of aromatic and hydrogenation. It is widely applied in hot melt adhesive (HMA), and pressure sensitive adhesive (PSA) because of its good heat resistance and good compatibility with base polymers such as SIS, EVA, SBS, SEBS, and polyolefin. It can also be used in road marking, BOPP masterbatch, and rubber compounding.

SYNTHALAT A 077 is a polyisocyanate-curing acrylic resin. Used in 2-pack coatings, in combination with aliphatic polyisocyanates, for industrial coatings that offer good mechanical properties along with resistance to chemical attack. It has applications in marine transportation, rail and mass transit coatings, coatings and markings, and also in infrastructure road paving.

Crestacryl® 71-9076 is a thermoplastic acrylic resin with very rapid solvent release and drive-over ability. This resin possesses good quality properties such as excellent hardness, very good elasticity and adhesion. It can be used as a high grade road-marking paint with excellent solvent release.

Crestacryl® 71-9078 is a high quality thermoplastic acrylic resin, which gives rapid solvent release, very good elasticity, excellent adhesion on various metallic substrates and very good alkali and water resistance. It can be used as universal binder for metal paints, wood coatings, road marking paints, masonry paints and concrete.

Crestacryl® 71-9044 is a thermoplastic acrylic resin with very rapid solvent release and drive-over ability. This resin possesses good quality properties such as excellent hardness, very good elasticity and adhesion. It can be used as a high grade road-marking paint with excellent solvent release.

Crestacryl® 71-8026 is a thermoplastic acrylic resin with very rapid solvent release and drive-over ability. This resin possesses good quality properties such as excellent hardness, very good elasticity and adhesion. It can be used as a high grade road-marking paint with excellent solvent release.

Domemul AA 9269 is a pure acrylic APEO-free emulsion designed for waterborne road marking coatings. The resin can also be used for fast drying waterborne coatings, including high humidity and low temperature environments.Features & BenefitsAcrylic emulsion for roadmarking paintsVery fast dryingGood water resistanceGood durability, non yellowingGood adhesion on asphalt, concrete

Domemul AA 7601 is an acrylic APEO-free emulsion designed for waterborne road marking coatings and paints for metal surfaces. The resin can also be used for fast drying waterborne coatings, also in high humidity and low temperature environments.Features & BenefitsWaterborne road marking coatingsVery fast dryingExellent adhesion on asphalt, concrete, metal

Domacryl 865 50 T is an air drying thermoplastic acrylic resin for road marking paints with higher solid content and low tendency to soiling. The bio-based content is 16%.Features & Benefits16% biobased on solid contentGood durabilityGood resistance to yellowing

Domacryl 980 is a highly reactive methacrylate resin suitable for fast curing two-component cold spray plastic road markings. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCCold spray plasticsExtremely reactive

Domacryl 937 is a low viscosity general purpose methacrylate resin for two-component cold plastic road markings. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCManual application with smoothing trowels and draw box unitsPedestrian crossings, stop lines, direction arrowsLow viscosity

Domacryl 855 60 T is an air drying thermoplastic acrylic resin for the preparation of the pigmented and transparent coatings. This resin is recommended for spray-application paint for road marking, with good adhesion to asphalt, concrete and metal.Features & BenefitsSpray applicationGood adhesion to asphalt, concrete and metal

Domacryl 841 50 BAc is an air drying thermoplastic acrylic resin developed mainly for the preparation of pigmented and transparent paints for metal. Because of its low solution viscosity this resin is an ideal product to upgrade solution vinyl, chlorinated rubber and cellulosic systems in durability, heat stability, hiding power and drying time.Features & BenefitsGood heat stabilityHard, tough resinFlexibleAlso for aerosols

Domacryl 850 60 T is an air drying thermoplastic acrylic resin developed mainly for the preparation of road marking paints. This resin can be used alone or in combination with acrylic resins or chlorparaffine. Domacryl 850 60 T based road - marking paints are characterized by good durability and good resistance to yellowing.Features & BenefitsGood durabilityGood resistance to yellowing

Domacryl 975 is a low viscosity general purpose polyester resin for two-component cold plastic road markings. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCManual application with smoothing trowels and draw box unitsPedestrian crossings, stop lines, direction arrows

Domacryl 857 55 X is an air drying polyacrylic resin developed for the preparation of the pigmented and transparent coatings for metal. This resin is also recommended for spray-application paint for road marking, rapid drying with good adhesion to asphalt, concrete and metal.Features & BenefitsSpray applicationRapid dryingGood adhesion to asphalt, concrete and metal

Domacryl 933 is a low viscosity methacrylate resin for flexible two-component cold plastic road markings. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCManual application with rollerParticularly suitable for large areas

Domacryl 945 is a low viscosity general purpose methacrylate resin for two-component cold spray plastic road markings. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCCold spray plastics (1:1 system with Domacryl 949)For warm climate

Domacryl 929 is a general purpose methacrylate resin for two-component cold plastic road markings with reduced odor. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCManual application with smoothing trowels and draw box unitsPedestrian crossings, stop lines, direction arrows

Domacryl 853 55 BAc is an air drying thermoplastic acrylic resin developed mainly for the preparation of road marking paints. Domacryl 853 55 BAc based road marking paints are characterized by good durability and good resistance to yellowing.Features & BenefitsGood durabilityGood resistance to yellowing

Domacryl 955 is a low viscosity methacrylate resin for hard two-component cold spray road markings. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCCold spray plasticsHard resin

Domacryl 943 is a methacrylate resin for hard two-component cold spray plastic road markings. This resin is accelerator-free and can be used by itself or in combination with Domacryl 941.Features & BenefitsLow VOCCold spray plastics (1:1 system with Domacryl 941)Hard resin

Domacryl 942 is a methacrylate resin for flexible two-component cold spray plastic road markings. This resin is accelerator-free and can be used by itself or in combination with Domacryl 940.Features & BenefitsLow VOCCold spray plastics (1:1 system with Domacryl 940)Flexible resin

Domacryl 992 is a methacrylate resin for flexible two-component cold plastic road markings. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow vocManual application with smoothing trowels and draw box unitsPedestrian crossings, stop lines, direction arrows

Domacryl 938 is a general purpose methacrylate resin for two-component cold plastic road markings. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCManual application with smoothing trowels and draw box unitsPedestrian crossings, stop lines, direction arrowsReduced odor

Domacryl 825 50 BAc is a thermoplastic acrylic resin designed mainly for the preparation of marine, heavy duty paints and road marking paints.Features & BenefitsFast dryingGood durabilityNon-yellowing properties

Domacryl 948 is a methacrylate resin for flexible two-component cold plastic road markings, particularly suitable for roller application over large areas. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCManual application with rollerParticularly suitable for large areas

Domacryl 922 is a general purpose methacrylate resin for two-component cold spray plastic road markings. This resin is accelerator-free and can be used by itself or in combination with Domacryl 920.Features & BenefitsLow VOCCold spray plastics (1:1 system with Domacryl 920)Especially suitable for white formulations

Domacryl 939 is a general purpose methacrylate resin for two-component cold plastic road markings. This resin is accelerator-free and can be used by itself or in combination with Domacryl 935.Features & BenefitsLow VOCManual application with smoothing trowels and draw box unitsPedestrian crossings, stop lines, direction arrows

Domacryl 930 is a methacrylate resin for hard two-component cold plastic road markings. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCManual application with smoothing trowels and machine extrusionParticularly suitable for profiled road markings

Domacryl 840 50 X/SA is a physically drying thermoplastic acrylic resin developed mainly for the preparation of pigmented and transparent paints for metal. Because of its low solution viscosity this resin is an ideal product to upgrade solution vinyl, chlorinated rubber and cellulosic systems in durability, heat stability, hiding power and drying time.Features & BenefitsGood heat stabilityHard, tough resinFlexibleAlso for aerosols

Domacryl 835 50 BAc is an air drying thermoplastic acrylic resin developed mainly for the preparation of road marking paints, masonry paints and concrete coatings. This resin can also be used as a universal binder for metal protective coatings alone or in combination with vinyl resins.Features & BenefitsGood durabilityAbrasion resistance