Products in Other Building & Construction Applications: Elastomers &...

Mirabel Coatings Crack Filler is a modified rigid polyurethane designed to penetrate and fill small cracks, or even larger holes in conventional concrete. Our relatively low viscosity formulation allows our product to penetrate into the pores of concrete creating a very tough matrix that can last for years. And because our crack filler is also heavily cross-linked this creates a very hard and semi-elastic material. The final cured product is one that will outlast most coatings that will be applied over it. Due to the heavy cross-linking and polymer matrix, other industrial concrete coatings should have no issue adhering to our product. Epoxies, Polyaspartics, Polyurethanes, Acrylics, etc… adhere without issue. Though you should always perform a test when using a new product.

POLYTONE™ M 131 is used in Varnishes, Paints and Over Print Varnishes, N.C. Lacquers etc.

POLYTONE™ M 130 is used for improving the film hardness of nitrocellulose and chlorinated rubber paints.

Hai Le Rui Chemical Titanium Red P2018 used in plastics, coatings, etc., and traditional titanium red is different, P2018 titanium red has environmental characteristics, is a more suitable for export of red environmental protection pigments. Titanium Red 108.

Synthan 2060 is the polyurethane resin and water are added to rubber granules and are mixed till homogenizing. The mixture is applied in a mold and putsin oven at 180 ºC during 15 minutes. After that the pieces are demoulded.