Products in Other Building & Construction Applications: Steel

Thermaguard™ TIC 180 is a waterbased, single component, Thermal Insulation Coating (TIC), formulated to provide a seamless weather resistant insulation film which can improve energy efficiency, prevent Corrosion Under Insulation (CUI) occurring, reduce condensation build up & provide personal protection according to ISO 13732-1. The insulation coating acts as a thermal barrier, protecting interior temperatures against cold, warm & humid weather conditions. Can be easily implemented into an inspection program due to the elimination of external cladding therefore, offering a maintenance friendly insulation coating system.

Vosschemie Benelux EPS Epoxy BN A+B is a solvent free epoxy system suitable as a coating or casting resin on various surfaces. It hardens to a tack free surface. BN EPOXY is self leveling, pigmented and slightly filled.

Thermaguard™ TIC 400 is a new technology waterbased, single component, inorganic polymeric siloxane matrix, Thermal Insulation Coating (TIC). The insulation coating is formulated to provide a seamless, hydrophobic, weather resistant insulation film. The insulation coating is an inorganic & ultra-low VOC coating. Offering hydrophobicity (moisture resistance), operating temperatures from -60 to 400oC range & exceptional weathering resistance. Thermaguard™ TIC 400 acts as a thermal barrier, which can improve energy efficiency, prevent Corrosion Under Insulation (CUI) occurring, reduce condensation build up & provide personal protection according to ISO 13732-1 (SafeTouch™ properties). Protecting interior temperatures against cold, warm & humid weather conditions. Elimination of external cladding results in a maintenance friendly insulation system for quick inspections. Thermaguard™ TIC 400 has Ultra-High-Build (UHB) capabilities up to 20000 microns DFT in a single multi-pass application. Application at such thicknesses allows use of Thermaguard™ TIC 400 liquid insulation to partly or completely replace use of traditional insulation material systems.

A high build, surface-tolerant, semi-gloss epoxy coating formulated for excellent resistance to corrosive and abrasive environments. This product is available in a wide range of attractive colors and is formulated for excellent adhesion to clean steel, rusted steel, weathered galvanized steel, wood, concrete, and most existing cured coatings. This product meets the requirements of ANSI/AWWA D102- 06 OCS-5 for first coat and intermediate coat and OCS-6 intermediate coat. Complies with U. S. EPA Ozone Transport Commission (OTC) for Volatile Organic Compounds for VOC Emission Standards for industrial maintenance coatings.

Magni 265 is a chrome-free duplex coating engineered for use on vehicle stampings and other structural components. Combining an inorganic zinc- rich basecoat with a high-performance organic topcoat, Magni 265 delivers exceptional corrosion protection on the interior and exterior of these structural components. Since it is applied after fabrication, Magni 265 provides excellent corrosion protection at the weld and heat-affect area. Unlike conventional e-coat, Magni 265 will provide extended field protection, often allowing for use of thinner-gage steel and lighter-weight components.

Sierra Performance™ MetalMax® DTM Acrylic Enamel is a low VOC, low HAP, single component, water-based acrylic urethane. This coating is designed for direct to metal (DTM) application to steel surfaces in mild to moderate industrial environments. It can be used on galvanized steel, aluminum, and other metals in both interior and exterior applications. Since this coating is very low odor during application, it is ideal for use in schools, healthcare facilities, food service areas, office buildings, hotels or in any area where odors are an issue. Sierra Performance™ MetalMax® DTM Acrylic Enamel complies with USDA FSIS regulatory sanitation performance standards for food establishment facilities. This coating is impervious to moisture and easily cleaned and sanitized

Tuff Coat Manufacturing UT-95 Metal Primer is a fast drying, single- component, water-based, corrosion inhibiting primer that's designed for use on interior and exterior metal applications that is compatible with Tuff Coat rubberized non-skid coatings. The product chemically etches for a tighter bond on clean, bare steel or aluminum surfaces.

Glyptal® 7920 PEARL GRAY PRIMER has been designed as a fast air-drying primer for use on metal. This primer has excellent oil and humidity resistance and is recommended as a primer coat under enamels and lacquers.