Products in Wood Coatings & Finishes: Sealer

Crestakyd® 30-9055 is a rapid solvent release alkyd that has high stability and good cold check test. It is an essential paint and coating component, offering excellent durability, good flow and leveling properties. This short oil alkyd can be used for easy sanding NC sealers and NC finishes.

Crestakyd® 30-5057 is a rapid solvent release alkyd that has high stability and good cold check test. It is an essential paint and coating component, offering excellent durability, good flow and leveling properties. This wood finishing, short oil alkyd can be used for easy sanding nitrocellulose sealers and finishes.

Ottopol 1450 is a hard-modified anionic acrylic emulsion with abrasion and wear resistance. This product has good UV resistance, chemical resistance, and resistance to blush. It has outstanding compatibility with urethane emulsions, providing essentially water-clear blends. It is used as wood finishes and cement sealers.

NatureMatte 31 is Finely micronized natural, biodegradable PHBV for efficient matting and burnish resistance in paints, coatings and inksFeatures and Benefits Natural biofermentation powder Tough, high molecular weight biopolymer provides efficient gloss reduction Improved burnish resistance, better than many synthetic additives Imparts non-slip properties Freshwater and marine biodegradable to OECD test standards Microplastic alternative

Synfluo 170VFA cost effective combination of micronized Fischer-Tropsch wax and PTFE for surface lubricity and scratch resistance.Features and Benefits Fischer-Tropsch wax provides slip, scratch and rub resistance PTFE provides lubricity, abrasion resistance and antiblocking Synergistic wax combination that enhances PTFE mobility to the coating surface

Propyltex® 230S are Medium particle size grades of micronized polypropylene for adding consistent texture and structure to a wide variety of paints and coatings.Features and Benefits Provides gloss reduction with improved burnish resistance vs. silica Adds a medium texture effect to the coating surface Tough, high molecular weight polypropylene gives good durability Does not Iower COF; ideal for non-skid surfaces Narrow cut mean particle size grades available for maximum texture control Adds texture in low bake (Low E) powder coatings

Synfluo 168XF is an economical combination of micronized Fischer-Tropsch wax and PTFE for surface lubricity and scratch resistance.

AquaMatte® 31Fine is micronized oxidized high density polyethylene for gloss reduction of paints and industrial coatings. Also useful as an additive in seed coatings.Features and Benefits Provides uniform gloss reduction with a smoother surface feel when compared to silica additives. Tough, high molecular weight polymer imparts burnish and abrasion resistance. High density polymer provides maximum in-can stability with minimal flotation in water based systems. Ideal for water based systems. In seed coatings, improves anti-blocking, flow, and abrasion resistance.

Micropro 400 is Modified high melt point hybrid polypropylene wax for consistent gloss control with surface slip, mar and abrasion resistanceFeatures and Benefits Improves mar, scratch and metal marking resistance. Effective gloss control agent with good burnish resistance in low or medium gloss finishes. Provides antiblocking properties. Low density will keep silica matting additives in suspension. Easy to disperse in both polar and non-polar systems.

Micropro 600VF is High performance modified high molecular weight polypropylene wax for consistent gloss control with excellent mar and abrasion resistance.Features and Benefits Improves mar, scratch and metal marking resistance. Effective gloss control agent with good burnish resistance in low or medium gloss finishes. Ideal for applications where higher COF is desired. Low density will keep silica matting additives in suspension.

Propyltex® 200HD are Medium to fine particle size grades of densified micronized polypropylene for adding consistent surface texture and structure with excellent in-can stability in water-based paints and coatings.Features and Benefits Provides gloss reduction with improved burnish resistance vs. silica Particle density optimized to essentially eliminate flotation or settling in water based systems Adds a mild to medium texture to the coating surface Tough, high molecular weight polypropylene gives good durability Does not Iower COF; ideal for non-skid surfaces For a finer texture, try PropylMatte 31HD

Micro Powders Inc MPP-635G is Micronized high molecular weight polyethylene wax for maximum rub and abrasion resistance in coatings and inks.Features and Benefits Crystalline, high melting point wax provides superior rub and abrasion resistance Imparts excellent antiblocking properties High molecular weight and hardness improvesresistance to solvent absorption and swelling Easy to disperse fine powder that can be incorporated with high speed mixing

PropylMatte 500 is Finely micronized polypropylene for consistent matting and gloss control in paints, inks and industrial coatings.Features and Benefits Provides uniform gloss reduction with good clarity, a smoother surface feel, and no viscosity effects when compared to silica additives Tough, high molecular weight polymer imparts superior burnish and abrasion resistance vs. silica Does not lower COF; ideal for non-skid surfaces In powder coatings, lowers gloss, reduces slip, and functions as a highly effective degassing agent vs. benzoin Eliminates powder coating pinholes and improves surface adhesion when overcoating or using silicone sealants Adds texture in low bake (Low E) powder coatings

Micro Powders Inc MPP-611AL is a highly engineered HDPE/alumina nanocomposite for unsurpassed scratch and scuff resistance.Features and Benefits Maximum scratch and scuff resistance with slip and lubricity HDPE composite reinforced with 300 nm aluminum oxide nanoparticles (Mohs Hardness 9) Easier-to-disperse nanotechnology in a safe, non- nano powder Composite particle density maximizes efficiency and minimizes settling Effective replacement for PTFE additives Easier-to-disperse nanotechnology in a safe, non- nano powder

MicroMatte® 1213 UVW is modified polypropylene wax densified with silica for consistent gloss control with clarity and stability in water-based and UV/EB coatings.Features and Benefits Effective gloss control with good in-can stability. Adds slip with scratch and mar resistance. Nonabrasive wax technology imparts a smoother surface feel vs. silica-based additives. Provides burnish and blocking resistance. Improved film clarity vs. MicroMatte 1011 UVW.

Synfluo 168XF is an economical combination of micronized Fischer-Tropsch wax and PTFE for surface lubricity and scratch resistance.Features and Benefits Fischer-Tropsch wax provides slip, scratch and rub resistance PTFE provides lubricity, abrasion resistance and antiblocking Synergistic wax combination that enhances PTFE mobility to the coating surface

AquaTex® 230 are Fine particle size grades of oxidized polyethylene for reducing gloss and adding surface texture.Features and Benefits Provides uniform gloss reduction with a smoother surface feel when compared to silica additives. Adds a mild texture to the surface. Oxidized polyethylene provides lubricity and mar resistance. High density polymer provides maximum in-can stability with minimal flotation. Ideal for water based systems.

Micro Powders Inc MPP-611XF is High performance grade of micronized olyethylene wax for inks and coatings.Features and Benefits Imparts excellent rub and mar resistance with good surface slip Provides excellent antiblocking properties Good heat resistance Better resistance to solvent absorption and swelling when compared to Fischer-Tropsch (synthetic) waxes

Propyltex® 325S-11125 is Micronized polypropylene for reducing gloss and adding consistent surface texture and structure to a wide variety of paints and coatings.Features and Benefits Provides gloss reduction with improved burnish resistance vs. silica Adds a mild texture effect to the coating surface Tough, high molecular weight polypropylene gives good durability Does not lower COF; ideal for non-skid surfaces Narrow cut mean particle size grade available for maximum texture control For a finer texture, try PropylMatte 31

Micro Powders Inc MP-22VF is a high performance, versatile grade of micronized Fischer-Tropsch wax for improved slip, scratch and rub resistance in a wide variety and paints, coatings and inks.Features and Benefits Imparts a high degree of lubricity and slip with rub and mar resistance Provides antiblocking properties Gives long-lasting water beading and weather resistance to exterior alkyd-based stains Easy to disperse fine powder that can be incorporated with high speed mixing Biodegradable to OECD 302C test standard Not a microplastic per ECHA definitions

AquaBead® 916A is specially formulated wax composite that provides immediate water beading and long-lasting water repellency and weather resistance.Features and Benefits Imparts immediate water beading. Provides long-lasting water repellency. Formulated with harder, higher molecular weight polymers for longer lasting water repellency in both penetrating and non-penetrating systems. Provides a uniform matting effect (without chalking) and long lasting moisture repellency for clear varnish stains. Combine with silica to improve weather resistance.

PropylMatte 450 is Finely micronized polypropylene for consistent matting and gloss control in paints, inks and industrial coatings.Features and Benefits Provides uniform gloss reduction with good clarity, a smoother surface feel, and no viscosity effects when compared to silica additives Tough, high molecular weight polymer imparts superior burnish and abrasion resistance vs. silica Does not lower COF; ideal for non-skid surfaces In powder coatings, lowers gloss, reduces slip, and functions as a highly effective degassing agent vs. benzoin Eliminates powder coating pinholes and improves surface adhesion when overcoating or using silicone sealants Adds texture in low bake (Low E) powder coatings

Micropro 600 is High performance modified high molecular weight polypropylene wax for consistent gloss control with excellent mar and abrasion resistance.Features and Benefits Improves mar, scratch and metal marking resistance. Effective gloss control agent with good burnish resistance in low or medium gloss finishes. Ideal for applications where higher COF is desired. Low density will keep silica matting additives in suspension.

Micropro 500 is a higher molecular weight modified hybrid polypropylene wax for consistent gloss control with mar and abrasion resistance.Features and Benefits Improves mar, scratch and metal marking resistance. Effective gloss control agent with good burnish resistance in low or medium gloss finishes. Improved solvent resistance vs. Micropro 400. Imparts antiblocking. Low density will keep silica matting additives in suspension.

MicroTouch 800XF is Highly resilient spherical polyurethane beads that can modify the tactile properties of formulated coatings and inks while improving burnish, scratch and mar resistance.Features and Benefits Virtually indestructible elastic particles that distort when disturbed by a physical force and then return to their original spherical shape when the force is removed. Provide different tactile effects ranging from satiny smooth to rubbery to leathery in properly formulated coatings Different particle sizes available to create a unique surface "touch" Improves burnish and abrasion resistance Effective gloss reduction

AquaKlean 403 is an anionic paraffin/polyethylene wax emulsion ideal for cleanability and water repellency in architectural coatings.Features and Benefits Provides excellent initial water beading and long term water repellency. Imparts soil release for improved cleanability. Imparts slip, antiblocking, scratch and abrasion resistance. Wax emulsion particle does not reduce gloss or clarity. Anionic emulsion stabilization contributes to immediate hydrophobicity.

AquaKlean 418 is a smaller particle size anionic carnauba wax emulsion that provides water beading with slip, block and mar resistance. Also useful in seed coatings.Features and Benefits Provides excellent block and mar resistance with good slip properties. Imparts water beading and soil release. Anionic emulsion stabilization contributes to immediate hydrophobicity. In seed coatings, improves anti-blocking, flow, and abrasion resistance. Formulated for 40CFR Part 180 compliance for both food and non-food use. Mean emulsion particle size of approximately 100nm.

Synfluo 171VF is a cost effective combination of micronized Fischer-Tropsch wax and PTFE for surface lubricity and scratch resistance.Features and Benefits Fischer-Tropsch wax provides slip, scratch and rub resistance PTFE provides lubricity, abrasion resistance and antiblocking Synergistic wax combination that enhances PTFE mobility to the coating surface

MicroMatte® 1011 UVW is An economical modified polypropylene wax densified with inorganic pigment for consistent gloss control and stability in water-based and UV/EB coatings.Features and Benefits Effective gloss control with good in-can stability. Adds slip with scratch and mar resistance. Nonabrasive wax technology imparts a smoother surface feel vs. silica-based additives. Provides burnish and blocking resistance.

Micropro 200 is Economical modified polypropylene wax for consistent gloss control with mar and abrasion resistance.Features and Benefits Improves mar, scratch and metal marking resistance. Effective gloss control agent with good burnish resistance in low or medium gloss finishes. Low density will keep silica matting additives in suspension.

Micro Powders Inc MPP-1241 is Coarse micronized HDPE wax for use as a dusting agent in hot melt adhesives.Features and Benefits Effective as a partitioning (dusting) agent for EVA, polyethylene, APAO, and styrene copolymer hot melt adhesives Can be applied to the solid adhesive (pellets or ribbons) by dusting Can be applied as a dispersion in water for underwater pelletizing Imparts a high degree of lubricity and slip with rub and mar resistance Coarse particle size is ideal for use as a surface modifier for high film build paints and coatings

Micro Powders Inc MP-22XXF is High performance, versatile grade of micronized Fischer-Tropsch wax for improved slip, scratch and rub resistance in a wide variety and paints, coatings and inks.Features and Benefits Imparts a high degree of lubricity and slip with rub and mar resistance Provides antiblocking properties Gives long-lasting water beading and weather resistance to exterior alkyd-based stains Easy to disperse fine powder that can be incorporated with high speed mixing Biodegradable to OECD 302C test standard Not a microplastic per ECHA definitions

AquaMatte® 26HDA are very fine grade of densified oxidized polyethylene for gloss reduction and optimum stability in water-based paints and coatings.Features and Benefits Provides uniform gloss reduction with a smoother surface feel when compared to silica additives. Tough, high molecular weight polymer imparts burnish and abrasion resistance. Optimized density of 1.08 eliminates flotation and ensures maximum in-can stability. Ideal for water based systems. Easy to disperse fine powder that can be incorporated with high speed mixing.

Propyltex® 270S-18523 is Micronized polypropylene for reducing gloss and adding consistent surface texture and structure to a wide variety of paints and coatings.Features and Benefits Provides gloss reduction with improved burnish resistance vs. silica Adds a mild texture effect to the coating surface Tough, high molecular weight polypropylene gives good durability Does not lower COF; ideal for non-skid surfaces Narrow cut mean particle size grades available for maximum texture control Adds texture in low bake (Low E) powder coatings

Micro Powders Inc MP-26VF is High performance, versatile grade of micronized Fischer-Tropsch wax for improved slip, scratch and rub resistance in a wide variety and paints, coatings and inks.Features and Benefits Imparts a high degree of lubricity and slip with rub and mar resistance Provides antiblocking properties Gives long-lasting water beading and weather resistance to exterior alkyd-based stains Easy to disperse fine powder that can be incorporated with high speed mixing Biodegradable to OECD 302C test standard Not a microplastic per ECHA definitions

AquaTex® 200 are Medium particle size grades of oxidized polyethylene for adding texture to paints and coatings.Features and Benefits Provides uniform gloss reduction with a smoother surface feel when compared to silica additives. Adds a medium texture to the surface. Oxidized polyethylene provides lubricity and mar resistance. High density polymer provides maximum in-can stability with minimal flotation. Ideal for water based systems.