Products in Agricultural & Construction Equipment: Pigment

HALOX® SZP-391 is a white, nonrefractive, corrosion-inhibiting pigment that is highly efficient and versatile. It is recommended for use in a wide variety of resin systems, such as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. Its fine particle size and low oil absorption make HALOX® SZP-391 the preferred pigment for thin-film applications (<1 mil or 25 microns).

HALOX® Z-PLEX 111 is a corrosion-inhibiting pigment used in protective coating systems that is highly versatile and more cost-effective than commercial zinc phosphate. HALOX® Z-PLEX 111 can provide a higher level of corrosion protection than commercial zinc phosphate when used as an equal-weight replacement.

HALOX® 700 is a white, non-refractive, corrosion-inhibiting pigment used in protective coatings. It provides extended protection in solvent-based and water-based epoxy and urethane coatings through the combination of zinc and aluminum phosphates. When used in alkyd and acrylic coatings, it is recommended to use it in combination with HALOX® Organic Corrosion Inhibitors for optimal performance.

HALOX® CW-314 is a heavy metal-free, non-toxic, anti-corrosive pigment designed for use in waterborne and solvent-borne protective coating systems. It is particularly suitable for systems where 21 CFR 175.300 approval or compliance with ANSI or NSF standards is required. HALOX® CW-314 is highly effective in improving the infrared (IR) reflectance and thermal emissivity of elastomeric roof coatings. It enhances the total solar reflectance (TSR) while maintaining dirt pick-up resistance (DPUR) and preventing mildew growth. It can be used alone or in combination with other non-toxic corrosion inhibitors and mineral pigments in the formulation of environmentally friendly specialty paints.

HALOX® CW-2230 is a white, non-refractive, corrosion-inhibiting pigment used in protective coating systems. It is not recommended for use in immersion or semi-immersion environments. HALOX® CW-2230 has the highest borate content and can be effectively formulated into resins such as medium and long-oil alkyds, epoxy-esters, and modified alkyd systems. HALOX® CW-2230 is compliant with ASTM D 4288-83, specification for calcium borosilicate pigment type 2.

DCL 5454 Phthalocyanine Blue, PB.15:4 is a transparent green-shade blue pigment that is non-crystallizing and stable to high processing temperatures in the presence of aromatic solvents. It is also non-flocculating in mineral oil/vegetable oil, and solvent-based systems. This pigment is recommended for high-grade industrial, agricultural equipment, automotive refinish and OEM, oven-drying coatings, and powder coatings, and is generally used in nitrocellulose and polyamide inks.

DCL 7354 DPP Red, PR.254 is a yellow-shaded DPP that offers excellent opacity, high color saturation, weather resistance, heat stability, acid, alkali, and solvent resistance. It is recommended for high-end coatings and high-end plastics applications, and is FDA compliant for indirect food contact plastic applications.

DCL 7168 Anthanthrone Red, PR.168 is a high-performance, bright yellow-shade red pigment for use in high-end coating applications. It is most notably used in exterior architectural systems, as its superior weather fastness in light tones makes it ideal for such applications.

DCL 1419 Quinacridone Violet, PV.19 is a bright, blue-shaded quinacridone with a similar shade to thioindigo red, and it has excellent overall properties. This pigment is FDA-approved (Section 178.3297) and is recommended for use in inks, high-grade industrial paints, implement enamels, agricultural equipment, and powder coating applications.

DCL 5452 Phthalocyanine Blue, PB.15:2 is an alpha, red-shade phthalocyanine blue treated to provide crystal stability and flocculation resistance with outstanding fastness properties. It is FDA-approved (Section 178.3297) and is used in general high-grade industrial and agricultural equipment, architectural coatings, and powder coatings.

DCL 5352 Phthalocyanine Blue, PB.15:2 is an alpha, red-shade phthalocyanine blue that has been treated to provide crystal stability and flocculation resistance with outstanding fastness properties. It is approved by the FDA (Section 178.3297) and is used in general high-grade industrial and agricultural equipment, architectural coatings, and powder coatings.

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

Terachem® 53 acrylic urethane for high-performance urethane and epoxy coatings

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

An ultra high-strength daylight fluorescent pigment for thinfilm solvent-based applications such as gravure and screen process inks. A dyed/pigmented melamine, sulphonamide, formaldehyde thermoset copolymer.

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Concentrated pigment dispersions based on a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. PanTINT 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

T Comet Blue 60 is a daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings.

Concentrated pigment dispersions based on a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. PanTINT 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability

Terachem® 53 acrylic urethane for high-performance urethane and epoxy coatings

High strength, APE free colorants with compatibility in a wide variety of conventional, low and zero VOC* water based systems. Easy to use PanTINT 94 Colorants are based on a proprietary combination of surface active agents resulting in exceptional system compatibility. They have little or no effect on viscosity, gloss, cure time, resistance to water spotting or exterior durability. They will not support the growth of microorganisms.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

Terachem® 53 acrylic urethane for high-performance urethane and epoxy coatings

A daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings. A dyed/pigmented melamine, sulphonamide, formaldehyde thermoset copolymer.

Terachem® 53 acrylic urethane for high-performance urethane and epoxy coatings

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

High strength, APE free colorants with compatibility in a wide variety of conventional, low and zero VOC* water based systems. Easy to use PanTINT 94 Colorants are based on a proprietary combination of surface active agents resulting in exceptional system compatibility. They have little or no effect on viscosity, gloss, cure time, resistance to water spotting or exterior durability. They will not support the growth of microorganisms.