Products in Appliances & Consumer Goods: Solventless & High Solids C...

Lo-Vel® 2010 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

Lo-Vel® 2018 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

Inhibisil® 73 anti-corrosion pigment is a calcium oxide-containing synthetic amorphous silicon dioxide. It is designed for use where thin film anti-corrosive protection is needed. Its high calcium oxide content, ease of dispersion, and high Hegman value provide formulation flexibility and expanded process capability.

Inhibisil® 75 anti-corrosion pigment is a calcium oxide-containing synthetic amorphous silicon dioxide. It is designed for use where thin film anti-corrosive protection is needed. Its high calcium oxide content, ease of dispersion, and high Hegman value provide formulation flexibility and expanded process capability.

Lo-Vel® HSF belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

Lo-Vel® 6200 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

LO-VEL® 8100 flatting agent is a high-efficiency flatting agent that is ideal for use in a variety of coating systems. It is a synthetic amorphous silicon dioxide, wax-treated silica designed for use where a Hegman value of 6 to 6.75 is required. Moreover, its high flatting efficiency, resistance to settling and heat-age stability provide formulation flexibility and expanded process capability.

Lo-Vel® 6000 is a synthetic, amorphous silicon dioxide flatting agent that is designed for use where a Hegman value of 5 to 6 is required. The combination of high flatting at low use levels and ease of incorporation delivers expanded formulation flexibility.

Lo-Vel® 2023 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

DISPARLON® L-1984N is a silicone-free, acrylic polymer surface control agent for leveling properties in medium polarity systems. Recommended for acrylic coatings including high solids melamine and 2K urethanes. L-1984N has lower surface tension than L-1980N and can be used where greater wetting is required.

NACURE® 2107 is an amine neutralized para-Toluenesulfonic (p-TSA) catalyst designed for fast cure response. It improves metal scratch resistance of acid catalyzed formulations.

NACURE® 1051 is an extremely hydrophobic acid catalyst based on dinonylnaphthalene sulfonic acid supplied at 50% active in 2-Butoxyethanol.

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

NACURE® XC-300 is a covalently blocked catalyst based on an alkylaromatic sulfonic acid. It is designed to offer improved stability in amino crosslinked primers that employ basic or ion exchange type anti-corrosive pigments.

NACURE® XC-311 is a novel latent acid catalyst designed to reduce the cure temperature of amino crosslinked systems.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

DISPARLON® NSH-8430HF is a surface control additive based on specially prepared acrylic/silicone copolymers designed for baking paints such as acrylic/melamine, alkyd/melamine, polyester/melamine and acid/epoxy paint for automotive and appliance applications. This product strongly prevents cratering caused by dirt/stain contamination, and gives excellent wetting over low surface tension coatings such as some of the new high-polarity automotive OEM coatings.

NACURE® 155 is a hydrophobic sulfonic acid catalyst based on dinonylnaphthalene disulfonic acid supplied as a 55% concentrate in isobutanol. Its primary use is as a catalyst for promoting the cure of hydroxy, carboxy and amide functional polymers with melamine and urea-formaldehyde crosslinking agents.

NACURE® 3525 is an amine neutralized Dinonylnaphthalenedisulfonic acid (DNNDSA) catalyst that utilizes a slower releasing amine for higher bake temperatures. NACURE® 3525 is formulated for increased solubility, especially in high solids polyester and alkyd formulations.

DISPARLON® OX-883HF is a defoaming/anti-popping agent based on a specially prepared acrylic polymer supplied in a HAPs free carrier. This product becomes well dispersed as fine droplets giving good anti-pop and defoaming properties solvent-based industrial bake systems.

At 100% active with a well-balanced surface-active capability, Teraflow® 1000 provides smoother films, allowing the application of thinner coatings, and contributes to substrate wetting, improvement of gloss, and recoat adhesion. Its novel pigment-affinic functionality, allows the formulator to optimize the dispersion of almost all pigments and extenders. It is soluble in ketones such as MEK and MIBK.

Etna Tec Limited SCD 6150 offers the formulator good uncatalyzed cure response and high film hardness. Properly formulated it offers excellent corrosion resistance. SCD 6150 yields excellent film properties in solvent based high solid formulations and can improve the dry film properties of various resin systems as a modifier. It is often used as a non-fugitive adhesion promoter. This product utilizes the same base resin as in SCD 6120 except it is reduced in EEP to provide non-HAPS, low VOC formulations.

PPG INHIBISIL® 73 anti-corrosion pigment is a calcium oxide-containing synthetic amorphous silicon dioxide designed for use where thin film build anti-corrosive protection is needed. High calcium oxide content, ease of dispersion and high Hegman value provides formulation flexibility and expanded process capability.

Terachem® 53 acrylic urethane for high-performance urethane and epoxy coatings

Terachem® 53 acrylic urethane for high-performance urethane and epoxy coatings

Terachem® 53 acrylic urethane for high-performance urethane and epoxy coatings

Etna Tec Limited SCD 1040 is designed specifically for low VOC finishes. Proper formulation achieves high pigment loading, VOC of less than 3.0 pounds/gallon and application with conventional spray equipment. SCD 1040 has good compatibility with alkyds and acrylics when used as a modifier to improve dry film properties.

Defoamer for water-based and UV-curing coatings, free of silicone. SCHWEGO foam 6360 shows excellent defoaming action in UV coatings and is also suitable for coatings based on alkyd, polyester, epoxy, PU and acrylate.

Polypol 613 has high Solids, excellent hardness, gloss & flexibility and also excellent weather & chemical resistance.

TRI-REZ® Polyol 1030-90 is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® Polyol 1030- 90 makes it an ideal polyol for formulating high solids and waterborne polyurethane resins.

Duramac® 56-5619 is a higher solids vehicle that provides good dry and enamel holdout characteristics.

Terachem® 53 acrylic urethane for high-performance urethane and epoxy coatings

Terachem® 53 acrylic urethane for high-performance urethane and epoxy coatings

Terachem® 53 acrylic urethane for high-performance urethane and epoxy coatings

Archemis® QD 201-2195 is a specially modified high solids alkyd supplied at 96% solids in mineral spirits. Coatings formulated at 250 g/l VOC provide excellent set- to-touch, tack-free, dry hard and through-dry characteristics. Gloss and yellowing properties are similar to 450 g/l VOC coatings based on 70% solids conventional long oil alkyds. Formulations at 150 g/l VOC are also possible. Manufactured in North America.

TRI-REZ® 1220A-300 is a 100% solids highly branched saturated polyester polyol based on TRIMET® TME (Trimethylolethane). The highly branched structure of TRI-REZ® Polyol 1220A-300 makes it an ideal choice for formulating two component, high solids polyurethane coatings and elastomers that require excellent UV and chemical resistance properties.