Products in Industrial Coatings: Adhesion Promoter

ProHere® I 13003 is designed for metal coatings that are exposed to extremely high temperatures. It provides good adhesion, very high chemical resistance and excellent high temperature resistance.

SP 270is a carboxylated polyester acrylate oligomer developed for UV/EB cure coating applications requiring low viscosity, and excellent adhesion on metal properties.

CARBODILITE™ V-04 is a Non-toxic, VOC-free polycarbodiimide based crosslinking agent which helps improve waterborne resins various attributes such as Water, solvent, chemical resistance, Abrasion, scratch resistance, Adhesiveness. It reacts with carboxyl group even in room temperature, with dosage low as 3~7wt%. Recommended curing condition : Over 120℃ (248°F).

Michem® Prime 4983R provides outstanding adhesion to both metallic and cellulosic substrates and enhances the water, grease, oil, and solvent-resistance of coatings and adhesives. It can serve as a tie coat or primer for extrusion coatings, a foil laminate, specialty paper coating, paper sizing agent, heat sealable coating, and a nonwoven binder, and used as a thermally active binder in thermal transfer release coatings.

KURARAY POVAL™ 28-99 LA by Kuraray is a water-soluble, polyvinyl alcohol (PVOH) grade manufactured by alcoholysis of polyvinyl acetate. It exhibits high molecular weight, good cohesion and low ash (sodium acetate) content. It possesses good adhesion to fibers-, fillers- and pigments. KURARAY POVAL™ 28-99 LA is recommended for adhesive for flooring webs, PSA labels and also in remoistenable adhesives which are employed mainly in the paper processing industry and films applications.

BONDiT™ A-37 is a high performance, high temperature moisture resistant, primer, adhesive, adhesion promoter and additive used with metals, glass & ceramics, elastomers and polymers. BONDiT™ A-37 offers a wide range of capabilities for promoting moisture resistance chemical bonding between minerals and polymers, as well as dissimilar polymers. it is used as a primer coat and additive for other BONDiT™ coatings and encapsulants. BONDiT™ In particular A-37 may be used as a primer to promote adhesion to silicone rubber and for vulcanizing silicone rubber to many substrates.

CARBODILITE™ E-02 is a Low-toxic, VOC-free polycarbodiimide based emulsion type crosslinking agent which helps improve various attributes such as Water, solvent, chemical resistance, Abrasion, scratch resistance, Adhesiveness. It reacts with carboxyl group even in room temperature, with dosage low as 3~7wt%. Recommended curing condition : Over 80℃ (176°F).

PL-2345 is a Methacrylate containing adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It can enhance adhesion to a large range of challenging substrates. It is especially effective on certain plastics.

SP 238 is a chlorinated polyester acrylate oligomer with GPTA developed for UV/EB cure coating applications good pigment wetting, excellent wet lithographic and good adhesion on metal and paper properties.

ProHere® P 00902 - An additive provides corrosion resistance and metal adhesion when used in can and coil, die lubes and industrial maintenance applications. The resulting coating may be removed by alkaline cleaners.

KURARAY POVAL™ L-508W by Kuraray is a water-soluble polyvinyl alcohol (PVOH) specialty grade manufactured by alcoholysis of polyvinyl acetate. Exhibits high molecular weight, good cohesion, good adhesion to fibers-, fillers- and pigments. KURARAY POVAL™ L-508W is recommended for adhesive and suspending agent for PVC suspension polymerization.

Photomer® 4003 is a monofunctional aromatic acrylate of low viscosity, moderate odor, good cure speed and is classified as a skin irritant and sensitizer. Due to the monofunctional character of its backbone, it has been found useful as a flexibilizer and as an adhesion promoter. It is suggested for use in UV/EB curable flexo, screen and flexographic inks, clear coatings and lacquers.

PHOTOMER® 5042 is a tri functional chlorinated polyester acrylate diluted in 40% Photomer® 4006. It has been designed to provide adhesion to substrates like metals, wood and plastics such as polyethylene (PE) and polypropylene (PP).

Amparmor® 1000 is a uniquely engineered microcapsule containing a patented blend of healing agent based on silicone-based resins, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. AMPARMOR® 1000 is recommended for use in liquid solvent-based, water-based resins and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems.

PL-2155 is a versatile adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It can enhance adhesion to a large range of challenging substrates. It is especially effective on many metals, glass and selected plastics.

ProHere® I 13001 is designed for metal coatings that need to deal with extremely high temperatures. It provides good adhesion, very high chemical resistance, very high mechanical strength and excellent high temperature resistance.

PL-2317 is an acrylic acrylate based adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It is especially effective on selected plastics.

PL-2121 is an effective adhesion promoter in a variety of applications. It demonstrates an especially strong affinity for adhesion to aluminum, cold rolled steel, stainless steel, and tin free steel when cured neat or in formulations. Low viscosity and high reactivity make PL-2121 an ideal choice for various energy cured coatings, inks, and adhesives.

SZ 225 is an acrylate functional oligomeric amine resin generally used as an additive or diluents for more viscous oligomers. When used in formulations with a photo abstraction type photo initiator (e.g. benzophenone), SZ 225 has an accelerating effect on the UV cure speed. SZ 225 also promotes adhesion to plastic substrates such as polyester, ABS, polycarbonate and polypropylene oxide.

PL-2152 is a methacrylate based adhesion promoter. It is a versatile adhesion promoter for energy cured coatings, inks, and adhesives. The low viscosity of this product makes it an ideal reactive diluent that can be added to formulations to enhance adhesion to a range of challenging substrates.

PL-2110 is a Phosphate containing adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It can enhance adhesion to a large range of challenging substrates. It is especially effective on certain metals, glass and selected plastics.

SP 236is a chlorinated polyester acrylate oligomer with TMPTA developed for UV/EB cure coating applications good pigment wetting, excellent wet lithographic and good adhesion on metal and paper properties.

PL-2263 is a versatile adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It can enhance adhesion to a large range of challenging substrates. It is especially effective on many metals, glass and selected plastics.

KURARAY POVAL™ 44-88 S2 by Kuraray is a fine powder polyvinyl alcohol (PVOH) grade. It is used as an adhesive promoter. It is suitable for modification of emulsion and remoistenable adhesives in the paper processing industry. It is a water-soluble polymer manufactured by alcoholysis of polyvinyl acetate. Aqueous solution of KURARAY POVAL™ 44-88 S2 can be added to polymer emulsion which is already stabilized with polyvinyl alcohol to extend the open time, increase setting speed and influence the rheology. It is used in postage stamps and labels. Its shelf life is 12 months. Complies with EU Directive 67/548/EC regulation.

CARBODILITE™ E-03A is a Non-toxic, VOC-free polycarbodiimide based emulsion type crosslinking agent which helps improve various attributes such as Water, solvent, chemical resistance, Abrasion, scratch resistance, Adhesiveness. It reacts with carboxyl group even in room temperature, with dosage low as 3~7wt%. Recommended curing condition : Over 80℃ (176°F).

PHOTOMER® 4173 is a proprietary UV/EB curable acrylate oligomer of low functionality and low viscosity. Designed primarily for use in etch-resist inks for printed circuit board manufacture, it can be readily formulated into a UV curable screen ink which exhibits good scratch resistance and improved stripping characteristics.

Deolink Epoxy TE-100 and Deolink Epoxy TM-100 are reactive bonding and coupling agents which are compatible with a large number of resins, like epoxy, acrylic, urethanes etc. Compared with amino silanes, Deolink Epoxy TE-100 and Deolink Epoxy TM-100 will not cause yellowing and can support the shelf life

The AMPARMOR® 2000 series is a uniquely engineered microcapsule containing a patented blend of healing agent based on epoxy functionalized polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. The AMPARMOR® 2000 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems.

BONDiT™ C-52 is an all-around general purpose, one-part primer, adhesion promoter and adhesive with moderate chemical resistance for metals, glass & ceramics, thermoplastics and thermoset polymers. BONDiT™ C-52 offers a wide range of capabilities for promoting single coat chemical bonding between coatings, sealants and adhesives of very diverse properties to mineral and polymer substrates. It is especially useful as a primer and adhesion promoter for injection molding to metal and glass with polyethylene, polypropylene and polyolefins in general, PPS, PVC, PBT, ABS, polysulfone, polystyrene, polyamide (nylon 6 and 66), polyamide-imide, polyimide, polyvinylbutyral, melamine, polycarbonate, polyester, polyether, phenolic, and epoxy, with molding temperatures up to 328°C/622°F.

BONDiT™ C-6 is an all-around general purpose, one-part primer, adhesion promoter and adhesive with moderate chemical resistance for metals, glass & ceramics, thermoplastics and thermoset polymers. BONDiT™ C-6 offers a wide range of capabilities for promoting single coat chemical bonding between coatings, sealants and adhesives of very diverse properties to mineral and polymer substrates. It is used as a primer coat for other BONDiT™ coatings and encapsulants.

KURARAY POVAL™ 23-88 EE by Kuraray is partially hydrolyzed polyvinyl alcohol (PVOH) grade. It exhibits good bonding strength and pigment binding capacity. It provides good cohesion and adhesion to fibers, fillers and pigments. It is suitable for modification of emulsion and remoistenable adhesives in the paper processing industry. It is used as an adhesive promoter. Aqueous solution of KURARAY POVAL™ 23-88 EE can be added to polymer emulsion which is already stabilized with polyvinyl alcohol to extend the open time, increase setting speed and influence the rheology. It is recommended for use in postage stamps and labels.

PL-2349 is a Methacrylate containing adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It can enhance adhesion to a large range of challenging substrates. It is especially effective on a wide variety of metals and many plastics.

Kuraray Poval™ L-508 by Kuraray is a water-soluble polyvinyl alcohol (PVOH) specialty grade manufactured by alcoholysis of polyvinyl acetate. Exhibits high molecular weight, good cohesion, good adhesion to fibers-, fillers- and pigments. KURARAY POVAL™ L 508 is recommended for adhesive and suspending agent for PVC suspension polymerization.

SP 271 is a carboxylated polyester acrylate oligomer developed for UV/EB cure coating applications requiring low odor, and excellent adhesion on metal properties.

PL-2122 is a versatile adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It can enhance adhesion to a large range of challenging substrates. It is especially effective on many metals, glass and selected plastics.

Manchem® Zircoaluminates feature an inorganic metal component and an organic component. The bi-functional nature enables them to “bridge” or couple two or more species through irreversible chemical interactions. Common applications which are well suited for this adhesion technology are Coatings, Inks, Rubber and Adhesives.