Products in Industrial Coatings: Leveling Agent

Flowing agent for powder coatings Lu'An Jietonda New Material K7573 is a kind of white powder based on acrylate polymer active ingredients for excellent leveling properties in powder coatings with excellent interlayer adhesion and fingerprint resistance.

Leveling agent for powder coatings Lu'An Jietonda New Material K7567 is a white powder based on an acrylate polymer active ingredient. It has good leveling properties for powder coatings.

Reacrone PCS-100S is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto fumed silica.

Reacrone PCL-100 is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto fumed silica.

Teraflow® 1500 imparts excellent flow and leveling to solvent based coatings. Tallicin® 1500 suppresses the tendency of baking finishes toward bubbling, cratering and pinholing. It also is used as a brushing aid to improve wet edge, flow and surface wetting often giving a spray-applied look to a brush or roller-applied coating.

EDAPLAN LA 452 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN LA 452 is free of silicone and has no adverse effects on recoatability. This additive is compatible with all common resin systems.

Tallicin® 4000 provides the combination of anti-crater properties with bubble release and flow. Finishes that require high D.O.I. and a defect-free finish, such as automotive coatings, benefit from Tallicin® 4000.

Slip and leveling agent hydroxyl functional terminated

Soyanol™ 5000X is viscosity and flow modifier for solvent borne coatings, non-phthalate plasticizer, it is compatible with most conventional resin systems and exempt solvents, provides excellent dispersion characteristics in paints and stains, deep penetration is excellent for wood and concrete applications, it improves leveling, increases open time for better cure rates and smoother finishes and it is more efficient than other options (use less, get more).

Reacrone PCL-350 is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto fumed silica.

Slip and leveling additive for solvent and water-based system

AFCONA – 2725 is tailor made as defoamer and air-releaser for solvent-free epoxy, UPE, PMMA and polyurethane systems

ADD-3034 is a silicone surface additive designed for substrate wetting, anti-cratering and leveling of the coatings. Due to the fluorocarbon modification, ADD-3034 has very low surface tension and is extremely compatible with most paint systems, both water- and solvent-based industrial coatings.

CoatOSil™ 7604B coatings additive is a silicone copolymer with a pendant ethylene oxide side chain that can enable excellent wetting and recoatability in water-borne coatings and inks. For water-borne primers and other industrial coatings, CoatOSil™ 7604B coatings additive is a good candidate where wetting and recoatability are a principal requirement.

Afcona 3755 is a leveling and flow control agent for solvent-based coatings with very effective defoaming property.

Dynoadd® F-101 Leveling additive for solvent borne and radiation curing coatings Excellent flow and leveling Improves substrate wetting Eliminates craters and pinholes ,Compatible in polar systems, Non-silicone Non-VOC.

Levelling additive for solvent-borne coating systems, silicone-free. SCHWEGO flow 8060 is used in solvent borne or solvent free coating systems. SCHWEGO flow 8060 is effective in nearly all binder systems and it is not suitable for water-based coating materials.

ADD-3239 is a silicone-based leveling additive with defoaming properties. It improves the surface properties of solventbased and solvent-free coatings with particular emphasis upon leveling. With a slight influence on surface tension, ADD-3239 can impart defoaming properties to the system. It is soluble in aliphatic and aromatic hydrocarbons, esters and ketones but insoluble in water. Sometimes it is necessary to dilute this 100% active material with a compatible solvent to improve its compatibility in a particular system. ADD-3239 is suitable for coatings and composite.

Afcona 3772 is a leveling and surface tension reduction agent for aqueous and non-aqueous coatings.

CLiQFLOW® 675 VR is a tin-free polyurethane based rheological additivefor aqueous clear and pigmented systems. The associative thickener increases mid and high shear viscosity and provides a slightly shear thinning flow behavior to aqueous systems.

PAT-ADD SL 1120 is a slip and leveling agent for use in solvent-borne coatings.PAT-ADD SL 1120 is mainly used in industrial coatings.PAT-ADD SL 1120 is extremely versatile in application, so efficient in various solventborne systems for optimizing slip, mar resistance and contributing to improved flow and leveling.

Chemguard S-764P is a short chain, phosphate ester type fluorosurfactant. It is water based and free from volatile organic compounds (VOC). It provides surface tensions as low as 17 dyn/cm in water at very low concentrations. ChemguardS-764P imparts enhanced wetting, spreading, leveling, and flow control properties on various types of water based coatings for architectural paints and stains, concrete coatings, industrial coatings, and aqueous hydrocarbon surfactant solutions. ChemguardS-764P has excellent dynamic surface tension properties which allow for the rapid attainment of low equilibrium surface tensions. It is low foaming and provides dirt pick-up resistance to exterior paints and interior low-gloss paints, sealers, and stains.

ADD-3030 is a silicone-based additive to improve surface properties in all kinds of industrial coatings. It reduces surface tension providing better substrate wetting. ADD-3030 improves leveling and increases scratch and abrasion resistance.