Products in Industrial Coatings: Waterborne Coating

AFCONA 6220 is a fatty acid modified emulsifier for universal colorants and improved color acceptance. It is able to stabilize inorganic and organic pigments in water and solvent systems. In addition, it improves the compatibility of the polar ingredients of universal colorants when used in non-polar solvent-based paints.

AFCONA 2502 is a defoamer for water-based applications that undergo high shear forces during preparation, including pigment pastes and other high-solid systems. AFCONA 2502 is a defoamer for water-based applications. It is suitable for applications like coatings and inks as well as for pigment concentrate preparations.

Dar-Tech Hauthane HD-4669 is a hard, co-solvent-free, aliphatic, aqueous polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic, and wood. This grade can be used as a sole vehicle or blended with acrylic emulsions for spray, dip, or rotogravure applications. It may be thickened with associative thickeners for alternative application methods.

AFCONA 3570 is a leveling and anti-crater agent for aqueous coatings with a low foam stabilizing effect. It is a fluorocarbon modified polyacrylic, neutralized with a suitable amine, and dissolved in water. It is suitable for all water-based paints and is recommended for use in all kinds of water-based coatings with a pH value of 8.0 or higher.

Dar-Tech Hauthane HD-2125 is a hard, chemically resistant, polyester-based, aliphatic, polyurethane dispersion. It was developed for use on flexible and rigid PVC and other plastic substrates. It may also be formulated to provide gloss topcoats on cementitious, metal, and wood substrates. This product exhibits superior chemical resistance properties while maintaining excellent flexibility and gloss retention characteristics.

Lo-Vel® 29 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

LO-VEL® 8300 flatting agent is a synthetic amorphous precipitated silica treated with a functionalized wax. It is designed for use in waterborne and solvent-borne coatings, and is suitable for coatings with a dry film thickness of less than 1 mil (< 20 microns).

AFCONA 2590E is an effective defoamer for general industrial paints, wood coatings, and more. It can prevent the formation of foam and destroy existing foam under the surface, as well as reduce the chances of carters and fish eyes. It is a pre-emulsification water-based silicone defoamer, which can be easily incorporated into water-born coating systems.

AFCONA 3580 is a silicone-based leveling and anti-crater agent for aqueous coatings that does not influence intercoat adhesion. AFCONA 3580 is an organically modified polysiloxane with very short chain repeatable units of siloxane. These small molecules allow it to move very quickly to an area of defects. This offers very good anti-crater properties without causing intercoat adhesion problems.

AFCONA 3231 is a slip and leveling additive for metal and UV coatings that offers very good slip performance with an "oily" or "wet look" appearance to visually enhance film thickness. It is commonly used in industrial heat-cured systems, car refinish polyurethane clear topcoats, and other vehicle paint.

AFCONA 4560 is a polymeric dispersant that provides excellent stability for inorganic and organic pigments in water-based systems. It is a high molecular weight, pH-independent polymeric dispersant that is specifically designed to deflocculate pigments in decorative and industrial paints. It is a modified polyacrylate polymer that offers steric hindrance and electron repulsion for superior performance.

LO-VEL® 8100 flatting agent is a high-efficiency flatting agent that is ideal for use in a variety of coating systems. It is a synthetic amorphous silicon dioxide, wax-treated silica designed for use where a Hegman value of 6 to 6.75 is required. Moreover, its high flatting efficiency, resistance to settling and heat-age stability provide formulation flexibility and expanded process capability.

AFCONA 3251 is an additive designed to offer the highest slip in all solvent-based coatings without stabilizing foam. AFCONA 3251 is specially developed for solvent-based systems where slip is the most important factor and foam stabilization is undesirable. Its performance is similar to AFCONA 3250, only with better leveling.

AFCONA 5585 is an effective dispersing agent for the preparation of solvent- and water-based pigment concentrates in industrial and architectural coatings. This is a high molecular weight dispersing agent which stabilizes pigments through steric hindrance, making it suitable for all types of pigments.

AFCONA 2590 is an effective defoamer for general industrial paints, wood coatings, and more. It prevents the formation of foams and destroys those formed under the surface, reducing the chances of carters and fish eyes. It is a pre-emulsified water-based silicone defoamer that can be easily incorporated into water-borne coating systems.

Lo-Vel® 66 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

Lo-Vel® 2023 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

AFCONA 4550 is a polymeric dispersant used for stabilizing inorganic and organic pigments in water-based systems. Its high molecular weight and pH-independent nature provide good stability performance with all types of pigments. It is a modified polyacrylate polymer that helps to deflocculate pigments in water-based decorative and industrial paints.

AFCONA 2503 is a waterbased defoamer and anti-foam agent with leveling properties that is especially useful in high shear applications such as pigment concentrates. AFCONA 2503 is an organically modified polysiloxane which is designed to give good defoaming, anti-foam and leveling performance in all waterbased applications.

AFCONA 3581 is a silicone-based leveling and anti-crater agent for aqueous coatings that does not influence intercoat adhesion. Organically modified polysiloxane for aqueous systems. It is an organically modified polysiloxane with very short chain repeatable units of siloxane. These small molecules allow it to move very quickly to an area of defects. This offers very good anti-crater properties without causing intercoat adhesion problems.

ASCONIUM® 140 can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCOTRAN® H30 is a ready-to-use, liquid-form flash rust inhibitor for waterborne coatings. It serves as a corrosion inhibitor for metal packaging protection, providing effective protection against flash rusting. This product can be used for waterborne neutral or alkaline paints or coatings and for industrial, professional, and do-it-yourself applications.

ASCONIUM® 130 is a liquid additive that improves the anti-corrosion and hydrophobic properties of both waterborne and solventborne metal coatings and enhances their adhesion to metal substrates. This product can be used alone or in combination with other anti-corrosion agents.

ASCOTRAN® HPB is a ready-to-use, liquid-form flash rust inhibitor for waterborne coatings. It serves as a corrosion inhibitor for metal packaging protection, providing effective protection against flash rusting. This product can be used for waterborne neutral or alkaline paints or coatings and for professional and do-it-yourself applications.

ASCONIUM® 112 can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCOTRAN® H14 is a ready-to-use, liquid-form, anti flash-rust additive for waterborne coatings. It functions as a hydrophobic agent, providing protection for the almost dry film in severe ambient humidity conditions. Additionally, it serves as a corrosion inhibitor for metal packaging protection.

ASCONIUM® 144DA can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCONIUM® 141S1 can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCOTRAN® H10 is a ready-to-use, liquid-form, anti flash-rust additive for waterborne coatings and galvanized steel substrates. It replaces mineral anticorrosive pigments and enhances their effectiveness. This product functions as a hydrophobic agent and increases the water resistance of dry films. It helps shield against corrosion in metal packaging.

ASCONIUM® 142DA can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCOTRAN® H18 is a ready-to-use, liquid-form, flash rust inhibitor for waterborne coatings. It serves as a corrosion inhibitor for metal packaging protection, providing effective protection against flash rusting. This product can be used for waterborne neutral or alkaline paints or coatings and for industrial, professional, and do-it-yourself applications.

ASCONIUM® 114 can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCOTRUST® X4 is a liquid additive for waterborne coatings. It reacts with metal cations to form stable organic complexes that are chemically bonded to the metal substrates, resulting in a stable and effective chemical passivation. This product shows synergic action with anti flash-rust additives.

ASCONIUM® 143 can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCOTRAN® AL4 is a ready-to-use, VOC-free, liquid-form, anti flash-rust additive for any waterborne coating. It contains a hydrophobic agent that protects nearly dry films under severe ambient humidity conditions. Additionally, this product acts as a corrosion inhibitor for metal packaging protection.

ASCONIUM® 111 can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.