Products in Industrial Coatings: Ceramic

ARC® 855E is 100% solids, ceramic reinforced, thin-film coating to protect metal against chemicals, abrasion, and corrosion.

HP-105 is a 2 component coating system having antimicrobial properties. This product is odorless and non-flammable. Primer is not required and is slip resistant certified.

Polyglass Coatings CeraMaxx is a two-component spray-able ceramic novalac epoxy primer.

MIX2FIX GP Steel is a general-purpose, two-part epoxy paste with a high steel-alloy particle content (35%). It can be used to make tough, permanent repairs that will be rust-free and can be treated like steel.

A.T Inks Matiz Range is an Economical version of the brillar reactive digital inks. This range has been introduced to counter some low density inks being sold in the market. Matiz reactive inks are offered in 8 color combination used in the industry I.E. Cyan , magenta , yellow , black, royal blue, red, orange and gray.

x-bond® T 9070 is a condensed silane in alcohol based binder. Exhibits high temperature stability, good abrasion and corrosion resistance. It is a transparent, inorganic-organic sol-gel material which catalyzes the degradation of organic compounds at high temperatures. It is free of fluorine and other halogens. Applications in temperature stable catalytic coatings and tarnish protection. Typical substrates are stainless steel, aluminum, glass or ceramic. Also suitable for surfaces in food contact. Suited for formulation of spray, dip and brush-on paints as well as for coatings used in roller application.

KECO 100C is a ceramic coating system which provides durability and abrasion resistance with excellent release. This ceramic coating consists of a blend of Teflon® PTFE, FEP, and PFA along with ceramic fillers to make this premium coating. It is able to resist from cryogenic temperatures up to 500°F.

Nigtas 5 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Long Oil Synthetic Paints, Rapit based Industrial Paints, Short Oil Cellulosic Paints, Marine Paints, Furniture Paints, Epoxy Paints, Printing Inks, Static Powder Coatings.

Tallicin® 120 is used as a specialty dispersant for precious metals in thick-film deposition on ceramics used in electronics applications. According to test results, Tallicin® 120 contributes to the conductivity of metal pigments in these applications. Also, Tallicin® 120 is recommended for use in dispersions containing glass frit.

Racine Flame Spray RSG-C250 belongs to a family of high release coatings. The RSG coatings are the premium products, with a tough gray silicone topcoat over a wear resistant ceramic base. The choice of base material is determined primarily by electrical conductivity requirements.

KECO 400BV Thermal Barrier coating is designed for both metal and non metal substrates. This coating will withstand extreme temperatures up to 1600°F without discoloring. KECO 400BV provides excellent protection against corrosive environments and thermal shock. This coating is meant to last and will maintain excellent adhesion even after several thermal cycles. KECO 400BV is VOC-exempt, and cures at room temperature.

Nigtas 2 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Long Oil Synthetic Paints, Rapit based Industrial Paints, Short Oil Cellulosic Paints, Road Marking Paints, Marine Paints, Furniture Paints, Epoxy Paints, Printing Inks, Static Powder Coatings.

Glyptal® 1201A is a aerosol-spray version of 1201 is packed for con-venience and greater econonomy in a large, 361-gram can. Pressurant is non-fluorocarbon.

x-bond® T 9027 is a condensed silane in alcohol based binder. Exhibits high temperature stability, good abrasion and corrosion resistance. It is a transparent, inorganic-organic sol-gel material which catalyzes the degradation of organic compounds at high temperatures. It is free of fluorine and other halogens. Applications in temperature stable easy-to-clean coatings and paint coatings. Typical substrates are stainless steel, aluminum, glass or ceramic. Also suitable for surfaces in food contact. Suited for formulation of spray, dip and brush-on paints as well as for coatings used in roller application.

GH Chemicals CR-41 has a higher reactivity and French Process Zinc Oxide grades are differentiated by surface area or particle size.

ReleaSys™ MOLD SEALER is a ultra-high performance mold release sealer designed to enhance release performance and anti-stick properties, reduce mold release consumption, and dramatically reduce mold build-up and cleaning effort. Utilizing high-density, crosslinking resin technology, ReleaSys™ MOLD SEALER generates a hard ultra-thin, continuous and nonporous film that binds tenacious to a variety of surfaces including metals, plastics, epoxies, and ceramics.

Acrylic resin cross-linking with polyisocyanate

The TE03 Powder coatings are thermosetting paints, which means that when heated, they transform irreversibly into a very hard adherent plastic material with a high index of resistance to most chemical agents, resulting in high-quality coatings in a single layer that can be shiny, satin, matte, textured, granite, transparent, metallic, and so on. Its physical composition is 100 percent dry extract, which can be applied using various electrostatic processes on a variety of supports (metal, glass, ceramics, and so on), followed by a predetermined stuffing.

Abocoat 8501-1™ is a Coating with Exceptionally High Resistance To Acids, Alkalis, Solvents, Acetone, Alcohol, & Gasohol. High Solids 2-Component, Fast-Setting Epoxy System.