Products in Industrial Coatings: Galvanized Steel

ASCONIUM® 140 can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

NANOMYTE® TC-5001 is a single component formulation designed to protect zinc plated and galvanized steel from corrosion and degradation. The product is a hard, dense nanocomposite coating that provides barrier protection for the alloy surface. The coating resists scratching and chipping, and strongly adheres to the substrate. The formulation is designed to meet customers’ requirements for film thickness and curing conditions.

AquaGrip® 2600 is used as an intermediate or topcoat over zinc rich primers for highly corrosive environments. Where exterior color fastness is required AquaGrip 2600 may be top-coated with polyurethane or acrylic finishes. Used on structural steel, steel tanks, offshore platforms, barges, refineries, petrochemical plants, power plants, railcars, pulp & paper mills, masonry surfaces and other areas as recommended. AquaGrip 2600 may be used as a surface tolerant single coat system in mild duty applications. Acceptable for drywall substrates.

Delta® AntiCor DTS 2K - SG 40 is a type 2K polyurethane paint based on acrylic / containing solvents.

IGP-HWF classic 5909B is a highly weather-resistant, transparent coating powder based on saturated polyester resins and declaration-free hardeners.

ILLUSTRIUM™ M1172 DTM is a zero VOC, light stable, high-gloss, fast-curing one step coating. It is ideal for OEM and refurbish painters who desire unmatched productivity and environmental compliance for the foreseeable future.

Poly-Chemcure PC-2.8 is a high-performing, very fast recoat, sandable, two component, VOC conforming (2.8lbs./gal./low HAPS) Amine Cured Epoxy that will cure at temperatures down to 20°F. PC-2.8 Epoxy Primer is specially modified with a proprietary blend of selective resins, wetting agents and penetrants to provide excellent adhesion and protection to properly prepared carbon steel, galvanized steel, and aluminum surfaces. Depending on the temperature, the fast setting PC-2.8 can be recoated in 90 – 105 minutes. PC-2.8 High Production Epoxy Primer is used as a regular and high build primer under a wide variety of Epoxy and Polyurethane topcoats.

EpoxyGrip® 2000 VOC is used as an intermediate or topcoat over zinc rich primers for highly corrosive environments. Where exterior color fastness is required EpoxyGrip 2000 VOC may be top-coated with polyurethane finishes. Used on structural steel, steel tanks, offshore platforms, barges, refineries, petrochemical plants, power plants, railcars, pulp & paper mills, masonry surfaces and other areas as recommended. EpoxyGrip 2000 VOC may be used as a surface tolerant single coat system in mild duty applications.

Delta® AntiCor DTS 2K - HG 80 is a high gloss, 2-component PUR primer and top coat with excellent adhesion properties on steel, aluminum, galvanized steel (zinc coating), powder coated substrates and many plastics (rigid PVC, ABS, polyester, etc.). Used in indoors and outdoors.

Delta® AntiCor DTS 2K - Matt 20 is a type 2K polyurethane paint based on acrylic / containing solvents. It can be applied on inside and outside.

Delta® AntiCor 1K Protop - SG 55 is a silk-glossy, one-component primer and top coat for iron, steel, aluminum, galvanized steel (zinc coatings), old alkyd resin coatings, etc., after appropriate pre-treatment, priming, or pre-painting. Used in indoors and outdoors.