Products in Other Paints & Coatings Applications: Flattener

Deuteron-WAX PP is a micronized poly-propylene wax characterized by a fine particle size distribution and good ease of dispersion.It can be used in all solvent-based lacquer systems and printing inks; both air-drying and stoving. The use of Deuteron-WAX PP also leads to excellent results in powder coatings.The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. Deuteron-WAX PP has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. back

Deuteron-WAX A is a micronized polyamide wax characterized by a fine particle size distribution and good ease of dispersion.Deuteron-WAX A is used as a matting agent to produce a mat or silk finish in all types of furniture and wood lacquers. In metal decorating and coil applications Deuteron-WAX A can be used to improve water resistance, slip properties and mar resistance in a wide range of general and special, solvent-based and water-based coatings. In powder coatings the wax is used as a flattening agent.Deuteron-WAX A shows excellent heat stability, chemical resistance and hardness. It shows better recoatability compared to micronized waxes based on polyethylene or polypropylene. The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. The product has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. back

Deuteron-WAX PP/2 is a micronized poly-propylene wax characterized by a fine particle size distribution and good ease of dispersion.It can be used in all solvent-based lacquer systems and printing inks; both air-drying and stoving. The use of Deuteron-WAX PP/2 also leads to excellent results in powder coatings.The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. Deuteron-WAX PP/2 has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. back

EZ FLAT 20 MS is a matting/flatting paste for systems containing Aliphatic and Aromatic solvents such as alkyd and oil-modified polyurethanes.

EZ FLAT AQ is a matting/flatting paste for gloss reduction in aqueous systems and used for making final gloss adjustments which ensures the finished product is within specification and on standard.

EZ FLAT W-30 is an easy to use stir-in dispersion which provides consistent gloss reduction in aqueous systems and used for making final gloss adjustments which ensures the finished product is within specification and on standard

EZ Flat 20BA is a matting/flatting paste for systems in which Butyl Acetate is the preferred solvent such as lacquers and bake finishes.

EZ FLAT A-100 is a matting/flatting paste for systems which Aromatic 100 is the preferred solvent such as lacquers and bake finishes.

Pergopak-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Pergopak M-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Pergopak M only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deocoat 4000 is a cross-linked polymer made of butyl acrylic resin for paints and coatings with fine a particle size. Deocoat 4000 has a spherical structure, is soft and solvent resistant. Deocoat 4000 is suitable for soft texture coatings with a matt surface and good scratch resistance.

Nordkalk C-2 consists of three products: Nordkalk C2, Nordkalk C5 and Nordkalk C7. The specific characteristics of Nordkalk C-Series products are presented in the table below. The products are available in large and small sacks and in bulk.

COATTUN Q.8 is a high quality Quartz, produced from deposits in the Cine-Milas region, Turkiye.

Wax granules and powders

BW-330 has high mafting efficiency, good compatibility with most of the water-based resins and emulsions. It can be also dispersed easily.

Köstrosol® AD 2035 is a whitish turbid aqueous dispersion of amorphous silicon dioxide nanoparticles. This middle-size colloidal silica is pre-final coated and stabilized by aluminum oxide. Afterward, the PH is adjusted by a weakly acidic ion exchange.

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Biodegradable water-based wax emulsion of the sugar cane wax DEUREX® X 52

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron SO 302 is a dispersion of an elastomer in water corresponding to Deuteron SO 300, however with considerably larger particle size distribution. It lends the coating a rough, softtouch- surface. It is not required to use specialized „soft types“ as binders. At the same time, it acts as a matting agent. back

Köstrosol® AD 1530 is an opalescent aqueous dispersion of amorphous silicon dioxide nanoparticles. This middle-size colloidal silica is pre-final coated and stabilized by aluminum oxide. Afterward, the PH is adjusted by a weakly acidic ion exchange.

Deuteron MM 669 reduces the gloss of organic coatings. At a higher dosage the viscosity will only be slightly increased. Good flow and processibility remain and allow for all usual application processes.When using Deuteron MM 669 in UV-curing binders no cloudiness has been noticed. The surfaces of coatings show excellent resistance to burnishing and mar resistance. Deuteron MM 669 imparts coatings with a soft touch. In general, the additional use of waxes, PTFE or similar products is not necessary. back

Micronized Silica, embedded in polymers (Double coated)

AnTec C-96 is a kind of ultra-fine aluminum silicate with high brightness and fine particle size. This product has the characteristics of good covering performance, strong coloring ability, low sieve residue, low viscosity, and easy dispersion.

Deuteron MM 684 is suited for all common coil-coating systems. This includes its utilization in conventional high-quality stove enamels. In addition, Deuteron MM 684 can be used in a variety of applications, preferably in pigmented paints and lacquers.Deuteron MM 684 is a mixture of finest-ground (micronized) materials that is well suited as a matting agent in paints and lacquers. Apart from the good matting effect, special importance is also attached to a low binder requirement in order not to affect the flow properties of the matted system considerably. This leads to a good formulation margin in the processing.Deuteron MM 684 does not contain any wax additives, thus coating layers equipped with it are not expected to cause any adhesion problems in multi-layer systems or repair coatings. back

Wax additive concentrate for powder coatings

CERETAN® MAB 7055 is a micronized Ethylen-bis-Stearamid-wax [EBS], coated with Benzoin. This product have application in Additive for powder coatings.These micronized amide waxes show very good performances with all pigment and plastic applications, especially PS and ABS.Amide wax coated with Benzoin, this product enables you to reduce the amount of Benzoin contained in your Powder Coating and provides excellent flow and leveling by reduced yellowing.

Hybrid wax based on sugar cane wax and montanic wax, partially saponified

Non polar Polypropylene wax

Deuteron MM 680 is primarily recommended for use in solvent-based 2-component systems (polyurethane or epoxy-resin lacquers). Beyond that, the product is also suitable for other air- and oven-drying systems.Deuteron MM 680 is a mixture of finest-ground (micronized) materials that is well suited as a matting agent in paints and lacquers. Apart from the good matting effect, special importance is also attached to a low binder requirement in order not to affect the flow properties of the matted system considerably. This leads to a good formulation margin in the processing.Deuteron MM 680 does not contain any wax additives, thus coating layers equipped with it are not expected to cause any adhesion problems in multi-layer systems or repair coatings. back

Biodegrable micronized sugar cane wax

Marcus Oil and Chemical M300 is a low molecular weight polyethylene wax which comes in in liquid, pastille, flake and powder form for convenience of use.

Micronized polypropylene wax

Non polar Polypropylene wax

Deuteron UV RMP is primarily suited for matting radical curing 100 % UV systems. The effect is based on a partial incompatibility that disrupts the even formation of the surface during curing. This creates a rough surface that causes highly diffuse light diffraction. Deuteron UV RMP creates very matte and resistant surfaces with very pleasing, silky soft haptics. The delivery form (powder)enables the use in every system without adheringto particular reactive thinners. back

Köstrosol® WA 1530 is an opalescent aqueous dispersion of amorphous silicon dioxide nanoparticles. This middle-size colloidal silica is pre-final coated and stabilized by aluminum oxide. Afterward, the PH is adjusted by a strongly acidic ion exchange. Köstrosol® WA 1530 with tested specification values receives an documented addition of sodium hypochlorite in order to obtain a residual chlorine content between 1 - 3 mg/L (as Cl2) at the date of delivery.

Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 100 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C.The small particle size makes the product suitable for thin-film applications. Deuteron SO 100 contains no waxes and thus does not negatively affect the recoatability.In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting.Application All radically curing coatings, especially 100 % UV-systems. Deuteron SO 100 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 100 can be combined with other organic matting agents, waxes and silicas. back