Products in Other Paints & Coatings Applications: Acrylics & Acrylates

StanChem Polymers SC 6044 is a high solids, medium hand, all acrylic and self-crosslinking emulsion. SC 6044 provides outstanding durability to washing and dry cleaning.

StanChem Polymers SC 6477 is a highly efficient, alkali-swellable acrylic emulsion that is recommended for thickening synthetic emulsions. SC 6477 can be incorporated directly into a binder system. Thickening begins with the addition of ammonia, sodium hydroxide or an amine to raise the pH to 7.0-8.0 for maximum thickening.

StanChem Polymers SC 6261 is a 100% acrylic copolymer emulsion designed for durable house and trim paints. Paints and coatings made with SC 6261, in addition to durability; also exhibit good wet adhesion, good dirt pick-up resistance and good gloss retention.

StanChem Polymers SC 6257 is emulsion polymer that can be used as a binder for a variety of coatings for different substrates. Coatings formulated with SC 6257 exhibit good clarity, water resistance, abrasion resistance and excellent adhesion properties.

StanChem Polymers SC 6016 is self-crosslinking acrylic emulsion when the polymer is cured at temperatures of 300 – 350 °F, depending on the time and temperature of cure. Added acid catalyst can increase the rate of cure.

Texicryl® 13-665 is designed for use in a broad range of formulations where low VOC is required. It has been specifically designed MIT free to meet the new regulatory requirements for artist’s color paints. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.

Domemul RA 9675 is an acrylic APEO-free latex resin designed for the preparation of industrial aluminum pigmented aqueous basecoats. The pseudoplastic rheology profile of this resin ensures a great metallic appearance.Features & BenefitsEspecially designed for 1k waterborne metallic shades basecoatsStrong pseudoplastic and thixotropic rheology profileImproved metallic pigment orientation

Domacryl 855 60 T is an air drying thermoplastic acrylic resin for the preparation of the pigmented and transparent coatings. This resin is recommended for spray-application paint for road marking, with good adhesion to asphalt, concrete and metal.Features & BenefitsSpray applicationGood adhesion to asphalt, concrete and metal

Domacryl 825 50 BAc is a thermoplastic acrylic resin designed mainly for the preparation of marine, heavy duty paints and road marking paints.Features & BenefitsFast dryingGood durabilityNon-yellowing properties

Domacryl 865 60 BAc is an air drying thermoplastic acrylic resin for road marking paints and low tendency to soiling. The bio-based content is 12%.Features & Benefits12% biobased on solid contentGood durabilityGood resistance to yellowing

Domacryl 833 50 D-30 is a physically drying thermoplastic acrylic resin used in a different paint system for exterior protective coatings.Features & BenefitsPhysically drying

CP1000 is all acrylic latex dispersion used as primer and additive for cementitious coatings like Skraffino, Arapido and Param SSL. CP1000 can be also used in semi-transparent stains.

Perdure A03 is a clear acrylic emulsion formulated to create a clear, non-yellowing, protective coating. Perdure A03 provides a tough, UV and abrasion resistant film that protects surfaces from moisture penetration, staining, dirt, dust, wear, and provides a surface that is easy to clean and maintain. Perdure A03 is an excellent choice for both interior and exterior applications.

ChemSystems Solvent Seal 27 is a high quality, 100% acrylic, solvent-based breathable sealer designed to seal concrete and masonry surfaces. CSI Solvent Seal 27 will protect surfaces from water, dust, stains, and dirt. Solvent Seal 27 produces a high gloss finish when dry.

ChemSystems Cemseal WB is a high quality pure acrylic water-based sealer designed to protect both interior and exterior concrete and masonry surfaces. CemSeal WB forms a tough water clear semi-gloss protective acrylic film that resists water, dirt and common day-to-day contamination at the same time eliminating concrete dusting. This product is a good choice for sealing all types of gray or colored concrete and masonry surfaces. It can be tinted using Helix water-based Tint Packs to achieve a translucent tinted sealer.

ChemSystems CSI Solvent Seal 23 - 100 VOC Gloss is a high quality, solvent-based acrylic sealer that meets VOC regulations of 100 g/l. It is designed to seal concrete, masonry, and stone surfaces, providing a gloss finish that will protect from water, dust, stains, and dirt. It contains fast drying solvents that require the sealer to be spray applied when temperatures exceed 75 °F.

Colorite Performance is protective acrylic paint with high resistance to UV rays for internal and external use, available in a wide range of colors.

ChemSystems CSI Solvent Seal 23 - Gloss Spray Fast Dry (SPFD) is a high quality, solvent based acrylic sealer that meets VOC regulations of 400 g/l. It is designed to seal concrete, masonry, and stone surfaces, providing a gloss finish that will protect from water, dust, stains and dirt. It contains fast drying solvents that require the sealer to be spray applied when temperatures exceed 75 °F.

ChemSystems HBS High Gloss Sealer is a water based pure acrylic sealer suitable for decorative concrete, gray concrete, stone, brick, stucco, porous tile, and concrete counter tops. It has excellent blush resistance, as well as resistance to yellowing from UV exposure. This sealer provides a gloss finish to all concrete surfaces.

ChemSystems CSI Solvent Seal 23 - 100 VOC Matte is a high quality, solvent-based acrylic sealer that meets VOC regulations of 100 g/l. It is designed to seal concrete, masonry, and stone surfaces, providing a gloss finish that will protect from water, dust, stains, and dirt. It contains fast drying solvents that require the sealer to be spray applied when temperatures exceed 75 °F.

ChemSystems Solvent Seal 25 (Matte) is a tough pure acrylic concrete sealer in a solvent base. It is designed to protect and beautify all types of concrete. Solvent Seal 25 Matte is non-yellowing to preserve the appearance of all types of decorative concrete. Solvent Seal 25 Matte is a High solids (25%) formulation for easy spray ability and ease of use. Apply Solvent Seal 25 Matte sealer as a second coat.

BURN BARRIER™ No. 3003 is a acrylic based primer used as a base coat before applying intumescent coating.

ChemSystems CSI Solvent Seal 18/ CE 22 is a high quality, 100% acrylic, solvent-based breathable sealer designed to seal concrete and masonry surfaces. CSI Solvent Seal 18/ CE 22 will protect surfaces from water, dust, stains and dirt. CSI Solvent Seal 18/ CE 22 produces a gloss finish when dry.

Add & Poly Resin Industrial A-31 is a solvent-based thermoplastic acrylic resin that can be coated with UV and it has good substrate adhesion and interlayer adhesion.

Vilacryl 850J52 is 2 pack isocyanate curing acrylics which is used in O.E.M. and agricultural refinishing application.

Canada Nadar Chemical AC1260 is a thermosetting acrylic resin by Canada Nadar Chemical. It exhibits high gloss, good leveling and good adhesion. AC1260 is recommended for versatile metal paint.

Canada Nadar Chemical AC1038A is a cost-effective, thermosetting acrylic resin by Canada Nadar Chemical. It exhibits high gloss, leveling and good resistance against salt spray. AC1038A is recommended for high-grade amino paint and varnish paint.

Add & Poly Resin Industrial A-33R is a solvent-based thermoplastic acrylic resin that is used in alcohol-resistant PS, ABS coating, aluminum powder paint and it has good whiteness.

Goonvean Fibers TEC03CON316 are precision cut acrylic fibers with excellent heat and chemical resistant properties used for reinforcement in a wide variety of industrial applications.

Etna Tec Limited TEC 3350 is a low viscosity 100% solids multi-functional acrylate liquid.

Nippon Carbide Industries Nikasol is acrylic polymer water emulsion resin. By providing products centered on pressure sensitive adhesives and other adhesives, we respond to our customers’ various needs. Environmentally conscious products are also available.

TROTON Spolka Acrylic Clear Coat MASTER C38 VHS 2:1 combines fast drying time (3 hours at 20°C) with long pot life, which allows the application on small elements as well as the over all painting of car bodies.

SPCRYL 50 ECO is a low molecular weight resin solution of SPCRYL LOP for water-based overprint varnishes and inks.

KELLOMER VK-420 is a aliphatic urethane acrylate oligomer. It is characterized by low odor, and high molecular weight. The cured films exhibit excellent flexibility, non yellowing, and good adhesion to substrates.

Daikalac S-1235 is a solution type of synthetic resin obtained by the polymerization of monomers such as vinyl acetate, acrylic ester and styrene in the presence of a solvent such as ethyl acetate and methanol.

Excel-Coat #200 is a pigmented texture coat that is applied over the Excel-Coat membrane.