Products in Other Paints & Coatings Applications: Calcium Salts

HeBoFill® LL-SP 120 is a Boron Nitride powder of high purity. Its high crystallinity results in excellent lubrication. The powder is also characterised by a narrow grain size distribution. The high crystallinity results in a relatively low specific surface area. This property enables a low increase in viscosity at high filler loadings.

CS series™ XPF0100S is a cross-linked polystyrene in highly spherical fine powder form. These cross-linked polystyrene particle materials exhibit high clarity, hardness, heat resistance and dimensional stability. CS Series™ cross-linked polystyrene materials are manufactured using TWO H Chem Ltd. Proprietary process technology.

Nordkalk ENRICH C is an ultrafine precipitated calcium carbonate (PCC) product created to replace titanium dioxide and binder in paints and coatings. The multi-functional product innovation of Nordkalk Enrich has increasingly generated greater attention across the market, creating value in various fields of application in paints & coatings, adhesives, paper, inks and building materials.

CalciL S acts as a filler. It is the high solid aqueous slurry. Has high purity, unique particle shape and narrow particle size distribution. Offers high whiteness, low iron content, high brightness, low levels of heavy metals, low abrasivity, less agglomeration and better flow as well as rheological properties. Also offers lower density, no dust or waste from ultra-fine particles, optimum optical properties, controlled particle size and relatively low surface area. It helps to achieve 6-sigma process control.

Celatom® LCS-3 is a functional products for the paint and coatings industry. High efficiency materials for matting, texture and rheology.Get ready for a bright future with our new unique, high performance paint and coatings additives including flux-calcined diatomaceous earth (DE), natural virtually..

ThermaFlex HR90 maintains superior delamination while providing an excellent balance of properties. Because their high purity, these micas maintain low abrasivity with elasticity and minimum attrition when exposed to the extreme mixing conditions of compounding and extrusion.

HisarCal® Ex-99 is used in the paper sector. Micronized calcite is used in the production of writing paper, wall paper, and cardboard by adding 15-30% cellulose. Because of its high whiteness, low cost, and other technical properties that it provides to paper, it has entered the paper sector and replaced kaolin in the last ten years all over the world, beginning in Europe.

Microblanc X-treme is a extremely white and fine crystalline CaCO3 with pigmentary properties. Due to its particle size distribution, formulators are able to reduce TiO2 significantly, retaining the whiteness, gloss and opacity levels. In colored systems the shades of colors are brilliant due to the very low yellowness value.

Calcit CalPlex 2 is a natural, ground calcium carbonate of exceptionally high purity. With an extremely fine particle size distribution and high whiteness CalPlex 2 shows excellent performance in the production of paper, paints, lacquers and plastics.

Dolkron® Pulver is a calcium magnesium carbonate Dolomite filler, with great whiteness and fineness, making it an excellent extender for use in the industry of polymers and paints. It has an oil absorption of 17g/100g and a top cut of 80µm.

MICROCARB NF19 is a product of high degree of whiteness produced from selected natural finest microcrystalline rhombohedra Calcium Carbonate.

Mississippi Lime Company Magnum Gloss 72% Slurry is designed for both the coatings and paper markets. For coatings, Magnum Gloss® 72% provides a superior level of gloss and brightness in satin and semi-gloss paints as well as industrial coatings. The significantly higher gloss is due in part to the tightly controlled particle range.

COATTUN S.PR.C30 is a high quality Sodium Feldspar, produced from deposits in the Cine-Milas region, Turkiye

VALCAL 307 is ground Calcium Carbonate based products made from very white, pure crystalline CaCO3 with low oil absorption properties.

CARBOLAG® 30 is a high purity precipitated calcium carbonate chemistry and whiteness, developed by LAGOS and used mainly in manufacture of plastics, paints, rubbers and artifacts. Through strict control of the entire production process, control of morphological structure and controlled distribution of the size of the particles, it is a product of high rheological performance and excellent application.

Ulmer Weiss MHM is a coarse calcium carbonate powder with a yellow index of 13.0 that is designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paper, paperboard, paints, varnishes, coatings, printing inks, mastics, soaps, detergents, rubber, cleaning mixtures, and polishing mixtures. Ulmer Weiss MHM is a solid powder in appearance with a characteristic odor and a loose bulk density of 1.0 g/cm3.

MicroTalc® SR is a magnesium silicate mineral with a monoclinic crystal structure. It is characterized by its softness and platy or lamellar physical structure. When ground into a fine powder, this lamellar property gives a smooth, soapy feel.

euroMinerals inpcc is precipitated calcium carbonate with different crystalline forms which yield to predetermined physical properties. Special controls and a mastery of the parameters involved in the precipitation reaction and later treatments are required in order to produce precipitated calcium carbonates.

Juraperle 0,5-1,2 is a coarse calcium carbonate powder designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paperboard, paper, detergents, rubber, cleaning mixtures, and polishing mixtures. Juraperle 0.5-1.2 has a characteristic odor with a grain size of 0.5-1.2.

Nordkalk C-5 consists of three products: Nordkalk C2, Nordkalk C5 and Nordkalk C7. The specific characteristics of Nordkalk C-Series products are presented in the table below. The products are available in large and small sacks and in bulk.

SILLITIN N 85 has a slightly higher requirements in color than SILLITIN N 82

West System 410-B Microlight, 4 lb is the ideal low-density filler for creating a light, easily-worked fairing compound especially suited for fairing large areas. Microlight mixes with greater ease than 407 Low-Density filler or microballoons and is approximately 30% easier to sand. It feathers to a fine edge and is also more economical for large fairing jobs. Not recommended under dark paint or other surfaces subject to high temperatures. Cures to a tan color. When West System® epoxy is thickened to a peanut butter consistency with Microlight™, the cured product sands and carves like basswood.

Juraperle 1-2 is a fine calcium carbonate granule designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paperboard, paper, detergents, rubber, cleaning mixtures, and polishing mixtures. Juraperle 1-2 has an appearance similar to sand or gravel, a characteristic odor, and a grain size of 1.0-2.0.

Microblanc 5 is a very fine, extremely white and of high purity crystalline Calcium Carbonate. MICROBLANC 5 is low in oil absorption and has good weather and aging resistance. In addition, it is easily dispersed.

Juraperle LM is a coarse calcium carbonate powder designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paper, paperboard, detergents, rubber, cleaning mixtures, and polishing mixtures. Juraperle LM is a solid powder in appearance with a characteristic odor and a loose bulk density of 1.35 g/cm3.

VALCAL 8C is ground Calcium Carbonate based products made from very white, pure crystalline CaCO3 with low oil absorption properties, coated with stearic acid.

ADMAFINE SO-E2 is used in electronic devices, filler for epoxy molding compound, fillers for printed circuit boards. It is usesd as resin filling materials engineering plastics, filler for paint, filler for precise plastic molding. It is used in ceramics molding products and in anti-blocking materials.

ThermaFlex HR4(S) maintains superior delamination while providing an excellent balance of properties. Because their high purity, these micas maintain low abrasivity with elasticity and minimum attrition when exposed to the extreme mixing conditions of compounding and extrusion.

VERDOL D-300 is used as mineral filler in paints, adhesives, rubbers, sealants and fillings with natural high purity of sedimentary origin.

Microblanc 130 is a Very fine, extremely white and of high purity crystalline Calcium Carbonate.

ADMAFINE SO-C1 is used in electronic devices, filler for epoxy molding compound, fillers for printed circuit boards. It is usesd as resin filling materials engineering plastics, filler for paint, filler for precise plastic molding. It is used in ceramics molding products and in anti-blocking materials.

HisarCal® Ex-2 is used in the paper industry. Micronized calcite is used in the production of writing paper, wall paper, and cardboard by adding 15-30% cellulose. Because of its high whiteness, low cost, and other technical properties that it provides to paper, it has entered the paper sector and replaced kaolin in the last ten years all over the world, beginning in Europe.

Microblanc 2 is a very fine, extremely white and of high purity, crystalline Calcium Carbonate. The greatest advantage of Microblanc 2 is the re-enforcement of the hiding power of paints, this is due to its unique particle size distribution.

EXCAL® 325 processed from a high-purity buff colored limestone ore to exact specifications. Suitable for use in loss circulation drilling fluids, building materials and other industrial applications where lower economics are necessary.

The WhiteLite™ WL-32 Lightweight Mineral Powders are amorphous products obtained by the fusion of several inorganic substances mainly silica, alumina, boria, and sodium oxide, with minor amounts of calcia.

Casal De Rey Calcium Octoate 6% used separately has no effect on the reaction of oxygen in the air with materials that can be polymerized by oxidation. However, in combination with other cobalt, lead and zirconium driers, it produces a reinforcing action of their effect, achieving excellent results with their use, achieving excellent results with their use.