Products in Other Paints & Coatings Applications: Silicones

Silsurf®C410 is a silicone glycol copolymer. It is used as an emulsifier in various personal care and industrial chemical formulations. Silsurf®C410 has an INCI name of PEG-10 Dimethicone.

Epoxy functional silane used used to improve dry and wet strength in cured composites reinforced with glass fiber rovings. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

PEL-SIL™ CL360 is a organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. It has pendant molecular structure. PEL-SIL™ CL360 is an excellent flow and leveling agent for solvent-based coatings and inks. It can also be used as defoamer or anti-foaming agent for waterborne coatings systems. It can be used at low dosage levels. For polyurethane foam coatings, PEL-SIL™ CL360 acts a surfactant and foam cell stabilizer. It is not compatible on the isocyanate side and must be added with the polyol. It exhibits excellent compatibility with most polyol premixes.

Silsurf®B608 is a silicone glycol copolymer. It is self-emulsifying in water and is designed to be emulsifier or wetting agent in various personal care and industrial chemical formulations. Silsurf®B608 has an INCI name of PEG-8 Dimethicone.

PEL-SIL™ CL370 is an amino-functional siloxane with pendant propyldiamine groups. The specialty amino polysiloxane can be used in coatings and adhesives for improving adhesion to various substrates. PEL-SIL™ CL370 is a reactive amine-containing siloxane additive as resin modifier for epoxy resin and polyurethane systems to impart flexibility and strength.

PEL-SIL™ CL400 is a linear, 100% active, PEG-10 siloxane polyether. It is a slip control agent for both waterborne, solvent borne UV/EB coatings and inks. PEL-SIL™ CL400 is also a flow and leveling agent and defoamer. It may also be incorporated into polymer systems through its two primary hydroxyls in polyurethane systems.

Andisil® SP 5100 Fluid is an EO / PO containing siloxylated polyether used as a surfactant in various industries

PEL-SIL™ CL350 is a polysiloxane with EO/PO polyether side chains. It can be used as a low foaming flow and leveling agent and wetting agent in waterborne and solvent borne coatings and inks. PEL-SIL™ CL350 is also reactive in 2K polyurethane systems as a resin and surface modifier. Other uses for PEL-SIL™ CL350 include surface tension reduction in silicone emulsions and improvement of drainage in pulp brown stock washing.

Si-COAT® 570hs™ High Solids High Voltage Insulator Coating is a one-part, room temperature vulcanizing (RTV) polysiloxane (silicone) high solids coating. It is engineered to provide a highly hydrophobic surface for its entire life, thus limiting leakage current and preventing flashovers due to insulator contamination. The high solids content of the material not only reduces the time required to build the desired film thickness, but also exceeds VOC requirements of most jurisdictions. The coating is not affected by UV light, corona discharge, chemical contaminants, salt, extreme temperatures or corrosive environments. Si-COAT® 570hs™ High Solids High Voltage Insulator Coating is formulated with exact amounts of non-reactive, low molecular weight silicone and ingredients with precise particle sizes for optimum performance and reliability.

Si-COAT® 570™ High Voltage Insulator Coating is a one-part, room temperature vulcanizing (RTV) polysiloxane (silicone) coating. Its unique and patented formulation provides a highly hydrophobic surface for its entire life. The coating is not affected by UV light, corona discharge, chemical contaminants, salt, extreme temperatures or corrosive environments. Si-COAT 570 HVIC is engineered with exact amounts of non-reactive, low molecular weight silicone and ingredients with precise particle sizes for optimum performance and reliability.

ADD-2524 is a silicon based highly efficient defoamer.

RAMA is a recoatable, carefully calculated blend of Alkyl-Aryl modified silicones designed to improve mar resistance without the standard recoat problems of common silicones. Manufactured for use in virtually all solvent-borne systems.

Royal Gent RG-9823 has heat resistance, good adhesion and hardness in hot temperature.

AMA is dimethyl silicone designed to improve mar resistance and reduce surface tension in conventional solvent based coatings. Systems include: acrylic resins, alkyd, epoxy, lacquer, phenolic, polyester and urethane.

Betolin AH 250 is an aqueous emulsion of a special polysiloxane.

Techneglas GR653L is high performance thermosetting polysiloxane resins.

Aqualen HS - 01 It has strongly defoaming and prevent foam stability.It is hard to make cratering problems. It can be added on milllbase

Royal Gent RG-98533 has good flexibility and heat resistant.

ABC Nanotech E+ lines are highly purified, discrete, spherical silicone resin powder for use in various industries. E+ is very conducive to various applications, such as optical, coating, and cosmetic industries. It has merits of inorganic powder, which has outstanding chemical stability and heat resistance and polymeric powder, which has soft touching, silky and creamy feeling. E+ endows applications with lubricating, light diffusing, and water repelling functions. ABC NANOTECH is supplying several types of E+ classified by their mean particle diameter from 0.8μm to 15μm.

NEVOSIL® R 680 is employed as a main binder in silicone based masonry paints. If formulated properly, the products made with NEVOSIL® R 680 are characterized by superior qualities such as high permeability to water vapor and CO2, low water absorption, low soiling tendency, a mineral like appearance and longer life.

Aqualen SB - 630 It has highly compatible ＆easy-dispersable. It minimizes the risk of surface defects like craters.

Silok® 353-General Silicone Leveling Agent is general silicone rapid leveling agent and slipping agent with quick leveling, good smoothness and recoating.

CLiQSMART AF is a modified polysiloxane-based defoamer for non-aqueous coating systems. It prevents the formation of foam during production and application.

DISAFOAM BCH 914 has a high performance and low dosage anti foaming agent. The product with 100% active materials, contains silicone in its formulation.

ESQUIM AD-306B is a silicone-based additive used in solvent-based coatings to achieve anticrater effect.

A-S-A® DF-1 series is defoaming agent for solvent based paint. This series effects well for material which normal defoaming agent does not such as specific sillicone.

CAC Silcote S water repellent is supplied as a solvented, colorless, ready to use, silicone resin solution which can be sprayed or brush applied onto the surface.

Royal Gent RG-9825 has heat resistance, good adhesion and hardness in hot temperature.

Silibase SR-6202S MQ Silicone Resin is a very unique silicone high molecular polysiloxane compound with a tight spherical structure with a two-layer structure. Since the introduction of the vinyl group imparts excellent hydrosilylation properties, it has excellent heat resistance, film formability, adhesion, water repellency, aging resistance, and ultraviolet radiation resistance. SilibaseSR-6202S Liquid MQ Silicone Resin can be used as a tackifier for silicone pressure sensitive adhesives, architectural sealants, organic resin coatings, etc., mobile phone buttons, epoxy adhesive bonding, etc.

ESQUIM AD-366 is silicone-based additive used in solvent-based or solvent free coatings that improves surface slip, leveling, gloss, wetting and anticrater effect.

Silibase SR-6033 Methyl Silicone Resin is a solid pure methyl silicone resin with very high silica content. It has excellent heat resistance and produces very little smoke. It has high reactivity, strong adhesive property, high hardness and good scratch resistance.

Deuteron SF 707 increases the smoothness and adds a pleasant grip to the surface. It includes neither waxes nor silicones. The matting effect is smooth, so that the haptic can be adjusted, without heavily influencing the gloss level.Deuteron SF 707 is suitable for systems where smoothness and pleasant haptic is desired in small dosages. Depending on the complete system Deuteron SF 707 can also be used to improve the mechanical resistance. back

ESQUIM AD-256 is an highly efficient compound for pigment concentrates or polyurethane dispersion-based coatings, polyurethane-acrylic or acrylics.

Silok® 8008 is a silicone wetting additive with silicon carbide structure, it has extremely low surface tension, weak acid and soda resistance (stable when PH=3-12), can almost wet all metal, plastic and other low–energy material, it has low foam stability.

NOFO 1032 is a blend of silicone and organic acid esters. Designed for use in most nonaqueous based coating systems, adhesives and inks. Allows for air release of high build epoxy, urethane, and various casting resins.

ADD-3035 is a silicone surface additive designed especially for unsaturated polyester and epoxy resins. Due to the solvent used (Methoxypropanol), ADD-3035 is particularly suitable for aqueous coatings.