Products in Packaging Coatings: Binder & Resin

Ottopol 25-30 is the ammonia-cut version of Ottopol 25-50E. This solution polymer has good adhesion to non-porous surfaces. Belonging to the Ottopol 25 Series, it is specifically designed for use as a grinding and letdown vehicle for water-based rotogravure and flexographic inks. It provides high gloss and excellent press stability. Ink and coating makers will benefit from the versatility of this series as a sole binder or component of high-gloss inks and overlay varnishes. These polymers are derived from the same monomer composition, and the dry resin is identical throughout the series.

Ottopol AR-150 is an anionic acrylic solution for alkali resistance. The dry resin is impermeable to alkali without the use of crosslinking agents. Inks and overlay varnishes for soap boxes and household paper towels will not be affected by the high pH of the detergent cleaner used with the paper towels.

Flytac 117 - 140 is a polymerized rosin that is processed with the new advanced sulfuric acid and chloride zinc method. It has many excellent properties such as a high softening point, anti-oxidation, non-crystallizing, and good compatibility with film-forming agents. Typical Uses Ink Adhesive Paint Varnish Soldering flux Synthetic resin

Flyeva 101 is a high-quality VAE emulsion, with excellent initial adhesion ability and mechanical stability. This product is generally applied to porous or non-porous materials. It has been widely used in industries like wood processing, paper cartons or tubes, packing, plastics, and metal membranes.

Flycryl 668 is a water-based styrene-acrylic copolymer developed by a special technology that eliminates the introduction of organic solvent. It is a good substitute for JONCRYL 678 from BASF. This mid-range molecular-weight acrylic resin is used in industries such as: Water-based inks Pigment dispersions Overprint varnishes Emulsions

Ottopol K-362 is a solution polymer for alkali resistance and adhesion to non-porous substrates. This product is suitable for use as a grinding vehicle for organic and inorganic pigments. Additionally, pigment concentrates can be let down with these resins to produce printing inks and coatings.

Ottopol K-633 is a low-molecular-weight cationic acrylic resin solution. It provides alkali resistance and adhesion to non-porous substrates with improved solubility. This product is suitable for use as a grinding vehicle for organic and inorganic pigments. Pigment concentrates can be let down with these resins to produce printing inks and coatings.

Flytac 117- 95 is a polymerized rosin that is processed with the new advanced sulfuric acid and chloride zinc method. It has many excellent properties such as a high softening point, anti-oxidation, non-crystallizing, and good compatibility with film-forming agents. Typical Uses Ink Adhesive Paint Varnish Soldering flux Synthetic resin

Ottopol 25-50E converts into a low-cost solution polymer for pigment grinding and high-gloss flexo and gravure inks. Belonging to the Ottopol 25 Series, it is specifically designed for use as a grinding and letdown vehicle for water-based rotogravure and flexographic inks. It provides high gloss and excellent press stability. Ink and coating makers will benefit from the versatility of this series as a sole binder or component of high-gloss inks and overlay varnishes. These polymers are derived from the same monomer composition, and the dry resin is identical throughout the series.

Ottopol K-23 is a cationic acrylic copolymer emulsion used for alkali resistance and adhesion to non-porous substrates. It is designed for use as a grinding and letdown vehicle for water-based flexographic and rotogravure inks. It is also suitable for use as an overprint varnish.

Flycryl 612 is a water-based styrene-acrylic copolymer developed by a special technology that eliminates the introduction of organic solvent. It is a good substitute for S-120 from HANWHA. This product is used in industries such as: Water-based inks Pigment dispersions Overprint varnishes Emulsions

Flytac 117- 115 is a polymerized rosin that is processed with the new advanced sulfuric acid and chloride zinc method. It has many excellent properties such as a high softening point, anti-oxidation, non-crystallizing, and good compatibility with film-forming agents. Typical Uses Ink Adhesive Paint Varnish Soldering flux Synthetic resin

GP 7565 by Georgia-Pacific Chemicals is comprised of Formaldehyde, Butan-1-ol and 4,4'-isopropylidenediphenol Bisphenol A; BPA. It is commonly used as Crosslinking Agent and Coating Resin for a variety of applications. It is available in Liquid form.

Aqueous anionic copolymer emulsion for general purpose applications where high barrier to water vapor and oxygen is needed.

Aqueous anionic copolymer emulsion designed as a high barrier adhesive and extrusion coating primer.

Aqueous anionic copolymer emulsion for general purpose applications where barrier to water vapor and oxygen is needed and heat sealability.

Polidene® 37-0065 is a premium binder for water-based metal protection primers.  This product is suitable for industrial and automotive OEM, aftermarket, and under-the-hood applications. Polidene® 37-0065 provides superior corrosion protection and water resistance compared to other water-based binder technologies.  This solution can be used in direct-to-metal primers, rust conversion coatings, and other anti-corrosive primer applications.  Manufactured in Kentucky, Polidene® 37-0065 PVDC binder is readily available.

Rovene 4100 is a styrene-butadiene emulsion polymer recommended for use for boxboard coating, in some publication grade papers and in the adhesive industry. Rovene 4100 may be used in adhesive and paper coating applications where FDA clearance is needed. Regulatory Status Detailed FDA 21 CFR compliances are available upon request.

Aqueous anionic copolymer emulsion for general purpose applications where barrier to water vapor and oxygen is needed.

Aqueous anionic copolymer emulsion for applications where excellent barrier to water vapor and oxygen is needed.

Aqueous anionic copolymer emulsion designed as a high barrier adhesive and extrusion coating primer.

Aqueous anionic copolymer emulsion for general purpose applications where barrier to water vapor and oxygen is needed and heat sealability- formulated to reduce slip and improve anti-block.

Aqueous anionic copolymer emulsion designed for use in the production of specialty paints and protective coatings.

Aqueous anionic copolymer emulsion designed for use as a primerless barrier laminating adhesive (can also be used as a primer to promote adhesion and add barrier in extrusion coated structures).

Rovene® 6114 is a low glass transition temperature, acrylic polymer emulsion with improved oil & grease resistance. It is a very soft film forming vehicle that provides good gloss, excellent water and rub resistance, and non-skid properties for flexographic and gravure inks and overprint varnishes. Rovene 6114 can be used as the film forming component in overprint varnishes or as the sole vehicle for inks and overprint varnishes. Because of the low glass transition temperature, Rovene 6114 has good adhesion to treated flexible films. Inks and overprint varnishes can be formulated with graphic arts standard products and additives.

Rovene 6103 is a soft, film forming vehicle that provides good water and rub resistance for flexographic and gravure inks and overprint varnishes. Rovene 6103 can be used as the film forming component in overprint varnish formulations or as the sole vehicle for inks and overprint varnishes providing excellent gloss. The emulsion can also be used as the nonskid component in formulations. Because of the low glass transition temperature, Rovene 6103 has good adhesion to treated flexible films. Inks and overprint varnishes formulated with Rovene 6103 can be formulated with graphic arts industry standard products and additives.

Rovene 6201 is an alkali soluble styrene-acrylic resin with a mid-range molecular weight supplied in a clear pellet form. Rovene 6201 is a general use resin for overprint varnishes, water based inks and pigment dispersions. Rovene 6201 provides excellent ink transfer and printability with high gloss.

Rovene 4076 is a medium-firm, carboxylated styrene-butadiene emulsion recommended for use in architectural coatings and interior primers for dry wall application where low perm ratings are required. Rovene 4076 is designed to exhibit tight, continuous films providing the following performance advantages: moisture vapor barrier properties, superior cold temperature coalescence, and ASTM E-96 perm ratings of ~0.5.

Rovene 6104 is a very soft, film forming vehicle that provides good water and rub resistance for flexographic and gravure inks and overprint varnishes. Rovene 6104 can be used as the film forming component in overprint varnish formulations or as the sole vehicle for inks and overprint varnishes providing good gloss. The emulsion can also be used as the non-skid component in formulations. Because of the low glass transition temperature, Rovene 6104 has good adhesion to treated flexible films. Inks and overprint varnishes formulated with Rovene 6104 can be formulated with graphic arts industry standard products and additives.

Rovene 6106 is a low viscosity but high solids letdown emulsion for paper and paper board substrates. The combination of the polymer design and high solids give inks formulated with Rovene 6106 very fast drying and excellent printability. The high solids, low viscosity, and fast drying characteristics are well suited for high speed gravure printing as well as flexographic printing.

Rovene 6115 is a hard, non-film forming vehicle that is neutralized with sodium hydroxide for flexographic and gravure inks and overprint varnishes primarily for use on paper and paperboard substrates. Inks formulated with this emulsion exhibit excellent ink transfer as well as exceptional resolubility on press with low odor. Inks and overprint varnishes formulated with Rovene 6115 dry fast, clean up easily on press, and can be easily formulated with graphic arts industry standard products and additives.

LPR76® is a uniquely processed film forming polysaccharide resin. It is a coactive resin, which will emulsify and stabilize water in solvent-based alkyd enamels, stains, and primers. LPR76® is Lorama’s most versatile polysaccharide resin and has been used in a number of patented and innovative products.

LPR® 221 is the next generation of Polysaccharide Resin Technology. This 100% Bio-based emulsifier builds upon Lorama Group’s strength and success of providing the paint formulator with VOC reduction, Excellent gloss, film hardness and adhesion, Compatibility with a wide range of alkyds, Lower formulation costs. LPR® 221 has also been designed to reduce the excessive yellowing seen in most alkyd paints. This feature helps keep white paints looking white.

Domopol 5176 60 SA is a saturated polyester resin designed for can coating overprint varnish (wet-on-wet), general industry finishes and automotive top coats (OEM). The bio-based content is 36% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits36% biobased on solid contentWet on wetHardness

Domopol 5102 55 SAB/BG ND is a saturated polyester resin developed for deep drawable, sterilisable stamping enamels for can coatings, tube and aerosol can coatings. The bio-based content is 14% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits14% biobased on solid contentMetal decorating enamelsAerosol can coatings

Domopol 5108 50 SAB/BG ND is a saturated polyester resin developed for white base coat and overprint varnish can coatings with sterilization resistance or for outdoor durable coil coatings. The bio-based content is 25% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits25% biobased on solid contentGeneral lineCan and coil coatings