Products in Packaging Coatings: Plasticizer

jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications. FeaturesPolymer-type epoxy resin with epoxy functional groups at the both endsHigh molecular weightHigh softening points Good adhesionApplicationsPCM, CAN and other coatingsPaintThermoplastics Printed electronics Plastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

LIPOXOL 1000 is a PEG 1000 belonging to Sasol's PEG range of products For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIPOXOL 200 is a polyethylene glycol with an average molecular weight of 200 g/mol. LIPOXOL 200 appears as a clear liquid at room temperature and has the following structural formula: HO-(CH₂CH₂O)₆H. This product can be used in a wide array of household and industrial applications.

LIPOXOL 400 is a polyethylene glycol with an average molecular weight of 400 g/mol. LIPOXOL 400 is a clear liquid at room temperature and has the following structural formula: HO-(CH₂CH₂O)₆H. This product can be used in a wide array of household and industrial applications.

LIPOXOL 600 is a polyethylene glycol with an average molecular weight of 600 g/mol. LIPOXOL 600 is a clear liquid at room temperature and has the following structural formula: HO-(CH₂CH₂O)₆H. This product can be used in a wide array of household and industrial applications.

LIPOXOL 300 is a polyethylene glycol with an average molecular weight of 300 g/mol. LIPOXOL 300 is a clear liquid at room temperature and has the following structural formula: HO-(CH₂CH₂O)₆H. This product can be used in a wide array of household and industrial applications.

POLYCHEM 7610-OX-50 is an short coconut alkyd solution for use as a baking vehicle in combination with aminoplast resins or as a plasticizer for lacquers.

Kimteks' Phthalate-free DOTP plasticizer has high plasticizing effect. It is generally used with materials like P. V. C in order to plasticise, after being heated to a doughy or plasticised state, to obtain elasticity, brightness for plastic material, generate electrical resistance, to prevent cracking and make surface smooth.

PHENODUR® PR 411/75B is a heat-curable phenolic resin designed for various applications. It functions as both a plasticizer and a cross-linking agent. This resin is recommended for coating the interior and exterior surfaces of packaging containers and cans. Additionally, it serves as a high-adhesion, chemically resistant protective coating for apparatus, vessels, pipelines, and more. Its applications include use in industrial coatings, metal coatings, and other industrial coating formulations.

Santicizer® 160 is a fast fusing, benzyl phthalate plasticizer designed for use in multiple polymer systems and applications. This plasticizer has compatibility in many polymer types, particularly in PVC. Santicizer® 160 can be used as a primary plasticizer or is often blended with general purpose plasticizers to offer faster fusion and better plasticizing efficiency. Together, these properties generate savings in faster production throughput, lower oven temperatures, and lower total plasticizer loadings. Santicizer® 160 is a well-recognized plasticizer utilized in many industrial PVC applications, processes like cleaning/purging, and as a carrier for biocides, pigments, and other additives.

POLYCHEM® G801-238-X-66 is a glyptal short oil non-drying alkyd. It has excellent compatibility and adequate hardness. It also has very high color retention and good flexibility. It is specifically designed for baking enamels and serves as an effective plasticizer for nitrocellulose lacquers.

Mosselman Castor Oil Blown 30 P (68187-84-8) is a polymerized vegetable oil obtained by oxidation of castor oil. This oil finds use as a plasticizer in varnishes. Further in hydraulic oils and as a component in polyurethane systems.

POLYCHEM® 4773-BA-70 is a short oil coconut alkyd with very low color (200 APHA color). It can be formulated for use in a low VOC baking vehicle in combination with aminoplast resins or as a plasticizer for nitrocellulose lacquers. It has excellent durability and gloss retention compared to conventional resin.

Girnar Industries Blown Castor Oil is a honey-golden vicious liquid derived after oxidative polymerization and due to this fact, it is also known as oxidized castor oil or polymerized castor oil. It is prepared by blowing air or oxygen into castor oil at various temperatures of 80-1300C.

STYSOLAC AW is a unique non-migrating, nonvolatile, non-hydroscopic resin plasticizer for use in both solvent and water base ink and coatings applications. An effective plasticizer for (water-based) alkalized polyner resinates and more polar resin dispersions, as well as for the more alcohol soluble type resin solutions.

Hercolyn D resin, a methyl ester of hydrogenated rosin, is a light amber liquid resinous tackifier and plasticizer. Being hydrogenated, it has marked resistance to aging.

DRT Abalyn methyl ester of wood rosin is an amber-colored, near neutral, tacky, viscous liquid.

CELUFLEX® AT 100 is a primary monomeric plasticizer produced from renewable vegetable raw materials. It´s a 100% sustainable product.

Winlex 4025 is a low softening point rosin ester with good stability and mild odor. It is easily emulsified in water by conventional means. The principal uses for this resin are in the formulation of oil varnish, lacquer, hot-melt, heat-sealing, and pressure-sensitive adhesives. It has a suitable FDA status for use in food packaging applications covered by 175.105.

Kanatol 400 (N) (DnBP) is almost colorless, odorless or slight aromatic, ester odor oily liquid, free of foreign materials. Plasticization of vinyl resins and other kinds of polymers in production of cable flexible PVC, artificial leather, rubber products, polymeric building materials, linoleum, film and sheet /plate materials, packing films, PVC gaskets etc.

Soyanol™ 1000E is water-based additive for paints or stains, highly compatible with many chemistries, including most latex, acrylic and urethane emulsion systems, it helps develop high stability emulsions, increases open times, improves freeze / thaw performance over industry leading coalescents, also does double duty as coalescent and plasticizer, it is efficient and cost effective solution which has typical usage 2%-7%.

Kanatol 200 (DEP) is a colorless, transparent oily liquid , slight aromatic odor, As a solvent for nitro-cellulose and cellulose acetate in manufacturing of varnishes & paints.

Kanatol 900 (DINP) is almost colorless and odorless oily liquid, free of foreign materials which is slightly soluble in water ( 0.285mg/L at 24C ) but soluble in alcohols, hexane etc. It is miscible and compatible with all the monomeric plasticizers of PVC compounding.

Glyplast 206/6 NL are low molecular weight polymers that incorporated into a polymeric matrix offer outstanding properties such as migration and extraction resistance, weather stability, high temperature performance, high mechanical properties, negligible toxicity and good environmental compatibility. Due to these remarkable properties, polymeric plasticizers are generally adapted to undergo the stricter legislation norm for Food Contact Materials (EU and FDA)

Glyplast 206/8 NL are low molecular weight polymers that incorporated into a polymeric matrix offer outstanding properties such as migration and extraction resistance, weather stability, high temperature performance, high mechanical properties, negligible toxicity and good environmental compatibility. Due to these remarkable properties, polymeric plasticizers are generally adapted to undergo the stricter legislation norm for Food Contact Materials (EU and FDA)

Kanatol 1001 (DIDP) is a clear, colorless, and odorless liquid, free of foreign materials. It is soluble in most organic solvent and in soluble in water. Around 95% of DIDP is used in PVC as a plasticizer. More than half of the remaining 5% is used in the production of polymers other than PVC (e.g. rubbers). The remaining DIDP used in non-polymer application including anticorrosion paints, anti-fouling paints, lacquers, inks, adhesives and sealants.

BECKOSOL® 1351 is a long castor alkyd plasticizer containing no solvents.

Velsiflex® 342 is one of the most popular liquid plasticizers. It is a high-solvating plasticizer containing mostly dipropylene glycol dibenzoate. It is used in a wide variety of applications, including caulk, adhesives, resilient flooring, PVC-coated fabrics and artificial-leather cloth. In PVC, it acts as a medium- viscosity high solvator that saves energy and improves process ability. Vinyl applications using Velsiflex 342 have excellent resistance to extraction from solvents and oils. It also works with vinyl to make it UV – light-degradation resistant and stain resistant.

OLVEX 3 is a modified vegetable oil

Glyplast 206/9 NL are low molecular weight polymers that incorporated into a polymeric matrix offer outstanding properties such as migration and extraction resistance, weather stability, high temperature performance, high mechanical properties, negligible toxicity and good environmental compatibility. Due to these remarkable properties, polymeric plasticizers are generally adapted to undergo the stricter legislation norm for Food Contact Materials (EU and FDA)

Glyplast 2106/7 are low molecular weight polymers that incorporated into a polymeric matrix offer outstanding properties such as migration and extraction resistance, weather stability, high temperature performance, high mechanical properties, negligible toxicity and good environmental compatibility. Due to these remarkable properties, polymeric plasticizers are generally adapted to undergo the stricter legislation norm for Food Contact Materials (EU and FDA)

TACKIFIER 70 is an APEO free acrylic emulsion. Tg = -45°C (approx).

ADDAPT PolySurF HPH is a solvent-free UV-curable additive. It can also act as a polymerisable hydrophilic non-ionic surfactant and/or co-polymerisable plasticizer. It is a proprietary mixture of Acrylated mono- and di-Phosphate ester; the mono-Phosphate ester being O-(EO)n>10-CH3 modified; where the reactive Acrylate group is Methacrylate

Glyplast 206/5 NL are low molecular weight polymers that incorporated into a polymeric matrix offer outstanding properties such as migration and extraction resistance, weather stability, high temperature performance, high mechanical properties, negligible toxicity and good environmental compatibility. Due to these remarkable properties, polymeric plasticizers are generally adapted to undergo the stricter legislation norm for Food Contact Materials (EU and FDA)

Glyplast 206/7 NL are low molecular weight polymers that incorporated into a polymeric matrix offer outstanding properties such as migration and extraction resistance, weather stability, high temperature performance, high mechanical properties, negligible toxicity and good environmental compatibility. Due to these remarkable properties, polymeric plasticizers are generally adapted to undergo the stricter legislation norm for Food Contact Materials (EU and FDA)