Products in Packaging Coatings: Enamel

Hydropalat® WE 3650 is a low-foaming wetting agent with key benefits including highly effective wetting for water-based coatings and ink applications, excellent dynamic surface tension reduction in combination with low foam stabilization, and suitability for lacquers or inks experiencing substrate wetting or cratering issues. Due to its excellent wetting properties, the product can also positively affect ink transfer and adhesion.

AFCONA 3770 is a leveling agent with good defoaming effect and anti-crater working for solvent-based coatings. Fluorocarbon modified acrylic polymer. AFCONA 3770 is a fluorocarbon modified acrylic polymer. Besides acting as an effective leveling agent, it also gives a strong defoaming effect as well as anti-crater properties.

AFCONA 3778 is a leveling agent for solvent-based and solvent-free coatings. It is a pure polyacrylic leveling agent. Polyacrylics are well known for flow and leveling performance. AFCONA 3778 also acts as a defoamer and deareator in most coating systems. It does not interfere with intercoat adhesion.

AFCONA 3779 is a leveling agent for solvent-based coatings. It is a pure polyacrylic leveling agent. Polyacrylics are well known for flow and leveling performance. AFCONA 3779 also acts as defoamer in most coating systems. It provides anti-flooding and floating properties, works as a defoamer and deareator.

AFCONA 3758 is a leveling and flow control agent for solvent-based coatings with anti-crater properties. AFCONA 3758 is a special modified polyacrylic polymer. It reduces drastically surface tension of organic coating systems. This, together with good compatibility in most solvent-based systems and with minimal foam stabilizing effect, makes it very effective as an anti-crater and flow control agent for all solvent-based coatings.

Pangel B20 is a powdered additive with a high thickening and anti-settling capacity for intermediate polarity systems, particularly recommended for systems based on aromatic and unsaturated polyester type solvents. It provides thixotropic, suspension and sagging-resistance properties to systems based on aromatic and unsaturated polyester type solvents, Pangel B20 does not require the use of a polar activator for its dispersion.

Crestakyd® 41-6010 is a universally employed resin in primers, enamels and hammer finishes. It is suitable for air dry, low bake and general purpose stoving industrial paints. The resin is compatible with urea and melamine formaldehyde resins and is therefore suitable for stoving finishes.

Crestakyd® 20-5029 is a rapid drying alkyd that has excellent gloss / weathering resistance and flow characteristics. This chain stopped, medium oil air drying alkyd is an essential paint and coating component, offering excellent durability, good flow and leveling properties. It can specifically be used for primers, general air dry industrial finishes and machinery enamels.

Crestakyd® 20-5036 is a chain stopped alkyd with excellent drying, gloss and weathering properties. This chain stopped, medium oil is an essential paint and coating component, offering excellent durability, good flow and leveling properties. It can specifically be used for primers, general air dry industrial finishes and machinery enamels.

Crestakyd® 20-9021 is a rapid drying alkyd that has excellent gloss / weathering resistance and flow characteristics. This medium oil air drying component is an economical chain stopped alkyd used for fast drying machinery enamels, primers and other air-dry industrial finishes.

Crestakyd® 10-3000 is an air drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. It is used for interior and exterior decorative enamels, marine and topside paints. Also suitable for undercoats, maintenance primers and floor varnishes.

Crestakyd® 41-5009 is a styrene-modified alkyd based upon a blend of mixed non-yellowing oils and supplied as a solution in xylene. It is a very versatile resin that gives paints with high gloss and good resistance properties. It is also used in the marine industry for quick drying coatings.

Additive EP024 73 Wa/BG is an epoxy phosphate additive for waterborne stoving enamels. With this resin it is possible to improve adhesion and resistance to corrosion, chemicals and stains.Features & BenefitsFor waterborne stoving enamelsImprove adhesionImprove resistance to corrosion

Additive EP135 is an epoxy-phosphate ester resin developed as an additive for stoving enamels. This resin improves humidity and corrosion resistance, adhesion, chemical resistance, stain resistance and pasteurization resistance.Features & BenefitsFor stoving enamelsImproves humidity and corrosion resistanceImproves adhesion, chemical resistance

Iron drier for high solids.

Phenylmethyl silicone additive for improved leveling in solvent-based coatings systems.

LPR® 221 is the next generation of Polysaccharide Resin Technology. This 100% Bio-based emulsifier builds upon Lorama Group’s strength and success of providing the paint formulator with VOC reduction, Excellent gloss, film hardness and adhesion, Compatibility with a wide range of alkyds, Lower formulation costs. LPR® 221 has also been designed to reduce the excessive yellowing seen in most alkyd paints. This feature helps keep white paints looking white.

LPR76® is a uniquely processed film forming polysaccharide resin. It is a coactive resin, which will emulsify and stabilize water in solvent-based alkyd enamels, stains, and primers. LPR76® is Lorama’s most versatile polysaccharide resin and has been used in a number of patented and innovative products.

Klenk's Japan Dryer toughens finishes. It speeds up the drying of oil-based paints and varnishes.

Domalkyd 0391 80 Wa/BG is a water thinnable alkyd resin designed for primers and top coats with less than 2% co-solvent. Excellent choice for painting steel barrels. The bio-based content is 66% (35% of the dry matter by the Carbon-14 method and an additional 31% via a biomass balance (BMB) approach as certified by the ISCC PLUS).Features & Benefits66% biobased on solid contentWater reducible after neutralizationNonyellowing enamelsGood outdoor durability

Domopol 5102 55 SAB/BG ND is a saturated polyester resin developed for deep drawable, sterilisable stamping enamels for can coatings, tube and aerosol can coatings. The bio-based content is 14% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits14% biobased on solid contentMetal decorating enamelsAerosol can coatings

Domopol 5101 60 SAB/DBE ND is a saturated polyester resin highly suitable as an elastifying component for stoving enamels. This resin is also recommended for coil coating applications such as interior and exterior architecture. The bio-based content is 31% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits31% biobased on solid contentFlexibilizer resinCan and coil coating applications

Domopol 5172 55 SAB/MPA ND is a saturated polyester resin recommended for can coatings such as metal decorating enamels. In coil coatings, the resin can be used for topcoats in interior architecture. The bio-based content is 25% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits25% biobased on solid contentCan and coil coatingsAppliance finishingPrimers for HDGPrimers for aluminum

Domopol 5178 70 SA/BG is a saturated polyester resin recommended for coil coating applications such as interior and exterior architecture. This resin can be also used for traffic uses and primers for aluminum. The bio-based content is 29% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits29% biobased on solid contentPaints with higher solid contentVery reactive

Domopol 5112 60SAB/BG ND is a saturated polyester resin designed for metal decorating enamels, tube- and aerosol can coatings or for coil coating applications such as exterior and interior architecture, appliance finishing, and traffic uses. The bio-based content is 17% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features and Benefits :17% biobased on solid contentExterior and interior architectureMetal decorating enamels Can and coil coatings

Domopol 9030 35% is a high molecular weight polyester resin designed for metal decorating enamels or interior can coatings and coil coating primers for HDG steel or aluminum. The main properties of this resin are flexibility, adhesion to HDG and aluminum and corrosion resistance. The bio-based content is 28% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits28% biobased on solid contentAdhesion promoterElastification resinCan and coil coatings

Domopol 9010 40 SAB/ DBE ND is a high molecular weight polyester resin developed for metal decorating enamels or interior can coatings and coil coating primers for HDG steel or aluminum. The bio-based content is 27% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits27% biobased on solid contentCorrosion resistanceAdhesion on HDG steelMetal decorating enamelsCan and coil coatings

Domopol 5148 55% is a saturated polyester resin developed for can coating applications, especially metal decorating enamels. This resin can also be used for tube and aerosol can coatings. The bio-based content is 26% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits26% biobased on solid contentOverprint varnishWet on wetDeep drawable

Domopol 0194 45 Wa is a water-thinnable saturated polyester resin suitable for the formulation of base coats and top coats. The bio-based content is 14% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits14% biobased on solid contentSolvent freeMetal decoration enamels

Domopol 5160 75 BG is a water-thinnable saturated polyester resin designed for can coatings. The bio-based content is 52% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits52% biobased on solid contentWater thinnable after neutralization

POLYCHEM® 7776-PP-75 is a HAPs-free high solids, fast drying water-reducible alkyd reasin. It is ideal for industrial and high gloss DTM applications. It has excellent corrosion resistance and gloss retention, along with great adhesion. It has applications in industrial top coats, primer applications, and industrial maintenance applications. It also has excellent features like excellent gloss, fast drying, and being EB free.

IrisColor BLACK (BC) ia a series of universal pigment dispersions specific for architectural paints and enamels for interiors and exteriors, formulated to be used for in-plant tinting. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisColor colorants are produced based on strict quality specifications for perfect reproducibility of color strength, tone and rheology.

POLYCHEM® 7655-KD-75 is a high solids VT oil reduced in narrow cut mineral spirits. It has applications in fields like primers, aerosols and also in enamels - lacquer type dry and copolymer.