Products in Packaging Coatings: Powder Coating

Superslip™ 6515AL is a highly engineered HDPE/amide wax/alumina nanocomposite for maximum scratch, scuff and block resistance.Features and Benefits Maximum scratch resistance; equal to PE/PTFE additives HDPE/amide wax composite reinforced with 300 nm aluminum oxide nanoparticles (Mohs Hardness 9) Good abrasion resistance with slip and lubricity Amide wax component provides excellent antiblocking and release properties Ideal for can and container coatings; 21CFR 175.300 approved Compare to Superslip 6515XF

Synfluo 178VF is a high performance combination of micronized Fischer-Tropsch wax and PTFE for surface lubricity and scratch resistance.Features and Benefits Fischer-Tropsch wax provides slip, scratch and rub resistance PTFE provides lubricity, abrasion resistance and antiblocking Synergistic wax combination that enhances PTFE mobility to the coating surface

PropylMatte 31 is Finely micronized densified polypropylene for consistent matting and gloss control with superior in- can stability in water-based paints, coatings and inks.Features and Benefits Efficient gloss reduction from satin to matte finish Improves burnish resistance vs. silica mattifiers Particle density optimized to essentially eliminate flotation or settling in most water based systems Imparts non-slip properties For more efficient matting with a fine microtexture, try PropylTex 325HD/270HD

Micro Powders Inc MPP-123 is Unique grade of micronized low density polyethylene wax for extra toughness and block resistance.Features and Benefits Imparts a high degree of abrasion resistance Provides excellent antiblocking properties Does not lower COF like high density polyethylene grades

Micro Powders Inc MP-22 is a high performance, versatile grade of micronized Fischer-Tropsch wax for improved slip, scratch and rub resistance in a wide variety and paints, coatings and inksFeatures and Benefits Imparts a high degree of lubricity and slip with rub and mar resistance Provides antiblocking properties Gives long-lasting water beading and weather resistance to exterior alkyd-based stains Easy to disperse fine powder that can be incorporated with high speed mixing Biodegradable to OECD 302C test standard Not a microplastic per ECHA definitions

Synfluo 180VF is High performance combination of micronized Fischer-Tropsch wax and PTFE for surface lubricity and scratch resistance.Features and Benefits Fischer-Tropsch wax provides slip, scratch and rub resistance PTFE provides lubricity, abrasion resistance and antiblocking Synergistic wax combination that enhances PTFE mobility to the coating surface

Polyfluo 400XFA is high performance wax/PTFE combination for improved surface lubricity with scratch resistance.Features and Benefits High performance product for adding slip and abrasion resistance Synergistic wax combination that enhances PTFE mobility to the coating surface High slip wax provides excellent surface lubricity PTFE dramatically enhances abrasion resistance

SuperGlide 904XF is a unique combination of amide wax and Fischer-Tropsch wax that provides slip, scratch and block resistance with a very smooth surface feel.Features and Benefits EBS provides maximum surface lubricity and block resistance without the use of PTFE Provides scratch and mar resistance Imparts a smooth surface "feel" Provides uniform gloss control at higher dosage levels

SST®-4 is a white low MW PTFE micropowder with particle size distribution at a mean value of 3-4 µm. SST® products are Shamrock’s PTFE micropowders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to provide slip, non-stick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

CS series™ XPF0100S is a cross-linked polystyrene in highly spherical fine powder form. These cross-linked polystyrene particle materials exhibit high clarity, hardness, heat resistance and dimensional stability. CS Series™ cross-linked polystyrene materials are manufactured using TWO H Chem Ltd. Proprietary process technology.

Keyland Polymer UV/EB resin UVP-1300 is an unsaturated polyester methacrylate resin that is cured with UV/EB energy. It is used in powder coatings, as an additive in ink, toner, and overlay varnish applications, and as an additive in 3D additive manufacturing applications.

SST®-4D is a white low MW PTFE powder with a particle size mean value of 3 µm. SST®-4D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST® products are Shamrock’s PTFE micropowders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to provide slip, non-stick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

DISPARLON® L-1982N is a silicone-free acrylic polymer surface-control additive for leveling and wetting in medium polarity systems. Recommended for high solids alkyd coatings as well as epoxy and phenolic applications.

FMSIL® R 812 is HDMS treated hydrophobic fumed silica, which acts as a rheology control additive in paint formulations.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

Polyfluo® 523XF is a unique extra fine, high performance composite of polyethylene and PTFE for superior surface lubricity with scratch and abrasion resistance.Features and Benefits High performance product for adding slip, scratch and abrasion resistance Synergistic wax combination that enhances PTFE mobility to the coating surface PTFE dramatically enhances abrasion resistance High density polyethylene provides improved surface slip Extra fine particle size provides excellent gloss retention and film clarity

SST®-4P is an off-white to light gray low MW PTFE powder with a particle size mean value of 3 µm.

MODAFLOW® RESIN is an acrylic flow modifier specifically formulated without the addition of silicone. It finds application in non-aqueous industrial coatings and powder coatings, where its primary functions include enhancing flow and leveling, reducing issues like pinholes, fisheyes, craters, and orange peel. This product contributes to improved substrate wetting and helps maintain or enhance substrate adhesion. Additionally, MODAFLOW® RESIN serves as a defoaming agent, aids in air release, and facilitates pigment dispersion. It is employed in various coating applications such as top coats, powder coatings, radiation-curable coatings, clearcoats, screen printing inks, inkjet inks, varnishes, flexography inks, solventborne coatings, gravure inks, and lithographic inks. Notably, it adheres to labeling claims of being VOC-free, APEO-free, and Tin-free.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

NonSKID 5389 is a micronized, modified polypropylene wax. Shamrock’s NonSKID micropowders provide resistance to sliding forces. NonSKID 5389 is used in air dry, baked, and radiation coatings for aqueous, solvent, UV, and powder systems at 3-5% of total formula weight.

PolyGlide® 1226XF is a highly engineered HDPE/ceramic/nanoceramic composite for abrasion resistance and lubricity.Features and Benefits HDPE composite reinforced with hard, inert ceramic microspheres and nanoceramic platelets Improved Taber abrasion resistance when compared to PE/PTFE additives Provides slip and lubricity Ideal for can and container coatings; 21CFR 175.300 approved Effective replacement for PTFE additives Compare to (coarser) Polyfluo 900

SYNTHACRYL® 700 is a TMA-free and VOC-free powder coating designed for the automotive and transportation, paints and coatings, and printing and packaging markets. It serves multiple applications, including automotive OEM coatings, industrial coatings such as coil and metal, various packaging coatings like can, film, and foil, and overprint varnishes. Compatible with metal substrates, this product appears as pale granules in its solid form, featuring matting properties.

NatureFine R331 is Finely micronized food grade rice bran wax for use in industrial coatings and agrochemical products.Features and Benefits Natural food grade wax conforming to 21CFR 172.890 Excellent burnish and abrasion resistance compared to synthetic wax additives Biodegradable to OECD 302C test standard Improves lubricity, dust-off, and block resistance in seed coatings Effective dry powder binding agent Microplastic alternative

DISPARLON® L-1980N is silicone-free acrylic polymer surface control agent for high polarity solventborne systems. Recommended for use in polyester/melamine and urethane coatings and in unsaturated polyester applications for leveling and defoaming properties.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

Keyland Polymer UV/EB Resins UVE-5100 is an unsaturated epoxy acrylate resin for use in powder coatings, as an additive in ink, toner, and overlay varnish applications, and as an additive in 3D additive manufacturing applications.

DISPARLON® L-1983N is a silicone-free acrylic polymer surface control additive for leveling properties in low polarity systems such as epoxy primers and epoxy/acrylic UV cure inks.

Deuteron-WAX PP is a micronized poly-propylene wax characterized by a fine particle size distribution and good ease of dispersion.It can be used in all solvent-based lacquer systems and printing inks; both air-drying and stoving. The use of Deuteron-WAX PP also leads to excellent results in powder coatings.The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. Deuteron-WAX PP has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. back

Deuteron-WAX A is a micronized polyamide wax characterized by a fine particle size distribution and good ease of dispersion.Deuteron-WAX A is used as a matting agent to produce a mat or silk finish in all types of furniture and wood lacquers. In metal decorating and coil applications Deuteron-WAX A can be used to improve water resistance, slip properties and mar resistance in a wide range of general and special, solvent-based and water-based coatings. In powder coatings the wax is used as a flattening agent.Deuteron-WAX A shows excellent heat stability, chemical resistance and hardness. It shows better recoatability compared to micronized waxes based on polyethylene or polypropylene. The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. The product has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. back

Deuteron-WAX TF has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. Deuteron-WAX TF imparts excellent buff resistance and slip properties. It produces a durable, semi-gloss finish when used either alone or with silica.Application It can be used in all solvent-based lacquer systems and printing inks; both air-drying and stoving. The use of Deuteron-WAX TF also leads to excellent results in powder coatings. back

CERETAN® ME 0825 is a spherical, micronized non polar Polyethylene wax and have applications as Paints and coatings, e.g. powder-, can-, car-, industrial-, building-, furniture- and floor coatings, and as Printing inks e.g. gravure-, overprint-, screen-, flexo-, heatset-, sheetfed- and coldset inks.CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

Razeen® SR 5197 is a solid, unmodified epoxy resin based on Bisphenol A.

AKTIFIT PF 111 is a Calcined product based on SILFIT Z 91 coated with alkyl silane.

Micronized polypropylene wax