Products in Packaging Coatings: Solventless & High Solids Coating

NACURE® 155 is a hydrophobic sulfonic acid catalyst based on dinonylnaphthalene disulfonic acid supplied as a 55% concentrate in isobutanol. Its primary use is as a catalyst for promoting the cure of hydroxy, carboxy and amide functional polymers with melamine and urea-formaldehyde crosslinking agents.

SETALUX® 1184 SS-51, an acrylic polyol featuring 2.0% OH (calculated on non-volatiles), stands out with its excellent fast-drying properties. This versatile resin, crafted for solventless and high solids coating, solventborne, 1K, and 2K coatings, offers a range of features. These include long potlife, excellent scratch resistance, improved chemical resistance, faster cycle time, and outdoor durability. SETALUX® 1184 SS-51 is a reliable choice for coating applications where a combination of fast drying, durability, and performance is crucial.

DISPARLON® L-1983N is a silicone-free acrylic polymer surface control additive for leveling properties in low polarity systems such as epoxy primers and epoxy/acrylic UV cure inks.

NACURE® 3525 is an amine neutralized Dinonylnaphthalenedisulfonic acid (DNNDSA) catalyst that utilizes a slower releasing amine for higher bake temperatures. NACURE® 3525 is formulated for increased solubility, especially in high solids polyester and alkyd formulations.

IMI Fabi CHD2 is used as primers - general industry Anticorrosion - Wood pigmented.

NOVALKYD S1010-70BA, is a resin suggested to formulate industrial enamels with high hardness development and fast drying curing. Resin for high solid and high performance enamels.

ANTI-TERRA-202 is Controlled flocculating wetting and dispersing additive for solvent-borne medium-polar to low-polar thick layer systems and primers to prevent fillers and inorganic pigments from settling and to gel bentonites. The additive is only available on the North American market.

IMI Fabi HTP3/7 is used as High solids - Marine & protective Primers - Renders.

IMI Fabi CHD05 is used as Top coats - General industry Wood Varnish.

Epilox T 19-34/700 is a modified, low viscosity epoxy resin which is resistant to crystallization. Crosslinking with suitable curing agents is preferably performed at room temperature.

Epilox T 19-32/1000 is a modified, low viscosity epoxy resin with reduced crystallization tendency. Crosslinking with suitable curing agents is preferably performed at room temperature.

Etna Tec Limited SCD 6150 offers the formulator good uncatalyzed cure response and high film hardness. Properly formulated it offers excellent corrosion resistance. SCD 6150 yields excellent film properties in solvent based high solid formulations and can improve the dry film properties of various resin systems as a modifier. It is often used as a non-fugitive adhesion promoter. This product utilizes the same base resin as in SCD 6120 except it is reduced in EEP to provide non-HAPS, low VOC formulations.

Ark (FoGang) Chemicals Industry Co. Ltd AC-333 is applied in all coating systems to reduce surface tension of coatings, increase surface smoothness, scratch resistance and blocking resistance. Ark (FoGang) Chemicals Industry Co. Ltd has excellent compatibility, prevents the formation of Bernard whirlpool, improving the leveling property and luster. Ark (FoGang) Chemicals Industry Co. Ltd AC-333 can be used in solvent-free, solvent-type and water-based coating systems and printing inks.

Radiation-curable aromatic epoxy acylate dissolved in reactive diluter

x-bond® U 9071 is a bifunctional silane binder. Acts as a curing agent and scratch resistant agent. Exhibits flexibility with excellent UV- and chemical resistance. Applications in varnishes based on polyurethane, polyacrylate or polyester.

UNITHANE IC-807 SF is a solvent free, medium soft, high gloss, APEO free, waterbased polyurethane dispersion; with excellent additive compatibility and flexibility properties. Developed for use in a formulated coating for graphic arts, concrete, paint, textiles and selected plastics.

PPG INHIBISIL® 73 anti-corrosion pigment is a calcium oxide-containing synthetic amorphous silicon dioxide designed for use where thin film build anti-corrosive protection is needed. High calcium oxide content, ease of dispersion and high Hegman value provides formulation flexibility and expanded process capability.

IMI Fabi HTP1 is used as Top coats - General industry Wood Varnish.

SPCRYL 50 ECO is a low molecular weight resin solution of SPCRYL LOP for water-based overprint varnishes and inks.

Linear polyester containing hydroxyl groups

KemaPox HF 328 is modified cycloaliphatic polyamine.

IMI Fabi CHD6 is used as High solids - Marine & protective Primers - Renders.

Optilith™ AM A is an anti-mist compound. Optilith AM A is a 95% non-volatile, high solids paste. Optilith AM A gives maximum reduction in misting without adversely effecting gloss or ink rheology. Optilith AM A is effective at 0.5 to 3% use levels.

x-bond® M 9004 is a methacrylate modified silicon dioxide and zirconia based high solid binder. Exhibits hardness, high abrasion, scratch stability with high chemical resistance (solvents, acids and bases). The coatings can be cross-linked by UV or electron beam curing. Thermal curing is also possible. It is a transparent or translucent inorganic-organic high solid binder. Suitable to formulate spraying, dipping and brushing paints and coatings for coil applications. Recommended for use in varnishes also.

EPIDIAN® 6 is used in anti-corrosive paints.

Wayncor™ 240 - Corrosion Inhibitor Pigment is a white Basic Zinc Molybdate anti-corrosive pigment which imparts good corrosion resistance to protective primers. It has a wide variety use in thermo set and thermo plastic systems. It can be used alone or in conjunction with other anti-corrosive additives. The typical use level for this product is between 3 – 7% based on total formula weight. It has a small particle size and narrow distribution which will permit it to be used in wash primers, DTM, or primer applications.

SPCRYL LOP is a low molecular weight acrylic resin for use in high solid water-based overprint varnishes.

Anionic/cationic wetting and dispersing additive to improve the wetting of pigment surfaces and organically treated Bentonites A 100% active solid version of AFCONA – 5044

Etna Tec Limited SCD 1040 is designed specifically for low VOC finishes. Proper formulation achieves high pigment loading, VOC of less than 3.0 pounds/gallon and application with conventional spray equipment. SCD 1040 has good compatibility with alkyds and acrylics when used as a modifier to improve dry film properties.

SPCRYL LOP-H is a low molecular weight acrylic resin for use in high solids water based overprint varnishes.

IMI Fabi CM3 is used as primers - general industry.

Winlex 4025 is a low softening point rosin ester with good stability and mild odor. It is easily emulsified in water by conventional means. The principal uses for this resin are in the formulation of oil varnish, lacquer, hot-melt, heat-sealing, and pressure-sensitive adhesives. It has a suitable FDA status for use in food packaging applications covered by 175.105.

Hanjin Chemical Hanakyd long oil length resin -HR-2273 is a Air drying enamel resin.

BECKOSOL® 6423-A4K4-75 is a non-HAPs, high-solids chain-stopped short-oil alkyd supplied at 75% non-volatile in n-butyl acetate and methyl amyl ketone (1:1).

UROTUF® L522-MPW-40 is an anionic dispersion of an aliphatic, urethane polymer provided at 40% solids in N-methylpyrrolidone and water. This product is similar to UROTUF® L52-MPW-30 except for being hight in solids (40% versus 30%) and containing significantly less NMP solvent (5% versus 12%).

BRIOMICA® 212 is a dry-ground ultra-white mica powder.