Products in Packaging Coatings: Lithographic Ink

Elite UVP6338 is a flexible hybrid ester acrylate which is BPA-free and contains 30% TMP(EO)TA.

SE 120 is a difunctional epoxy acrylate oligomer. This product is characterized by its light color, fast cure response, high gloss, excellent solvent resistance and high surface hardness.

SE 1700 is diacrylate ester of bisphenol A epoxy acrylate oligomer. This product is characterized by its low irritancy fast cure response, high gloss, excellent solvent resistance and high surface hardness.

SU 542 is a difunctional aliphatic urethane acrylate oligomer developed for UV/EB cure coating applications requiring excellent adhesion on difficult substrate, good toughness and non-yellowing properties.

Elite UVP6175-GP30 is a flexible hybrid ester acrylate which is BPA free and contains 30% GPTA.

Elite UVE2587-GP30 is a epoxy Novolac or BPF glycidyl ether acrylate with 30% GPTA and is BPA free.

Manalox™ 310 is proprietary aluminum chelate complex has been formulated as a gelling agent for lithographic printing ink vehicles, and is provided as a convenient solution in high-boiling ink oil solvent. Extremely stable under high temperature conditions, Manalox 310 is anideal gellant for varnishes cooked at temperatures ranging from 160 – 200°C. Capable of achieving very high viscosity at low aluminum content, Manalox 310 has a slow rate of reactivity that permits addition to many varnishes at high temperatures. Manalox 310 does not produce any byproduct alcohols during the gelling reaction.

Manalox™ 318 is an oxoaluminum acylate with an aromatic character designed to provide both high viscosity and high yield stress value properties in lithographic printing ink vehicles. It develops the viscosity within about 30 – 45 minutes at 170-175 °C, but does not react as quickly in the initial stages as does OAO, and therefore it has less of a tendency to produce “seeds” in the varnish. The level of use varies according to the particular varnish formula and type of gell structure desired, but generally falls between 1.0 and 2.5%. Manalox 318 should be evaluated as potential replacement for either Arrow Gell or OAO. One of the expected advantages of replacing OAO with Manalox 318 would be lower water pickup properties in the subsequent ink.

Elite UVE2531-TM25 is a Epoxy Novolac or BPF glycidyl ether acrylate with 25% TMPTA and is BPA-free.

Elite UVP6150 is a flexible hybrid ester acrylate and BPA free.

Elite UVP6331-TM25 flexible hybrid ester acrylate which is BPA-free and it contains 25% TMPTA.

PE Acrylate Oligomers

Elite UVP6001 is a flexible hybrid ester acrylate.

Epoxy Acrylate Oligomers

SE 1703 is a amine modified of SE 1701. This products was developed specially for application where improved flexibility and exceptionally fast cure.

TIANCURE ITX is a highly efficient type Il photoinitiator when used in combination with amine synergists (aminobenzoate) to initiate radical photopolymerisation of unsaturated resins such as those based on a prepolymer - e.g. acrylates - in combination with mono- or multifunctional monomers as reactive thinners. It is also widely used as a very efficient sensitizer in combination with type I photoinitiators, absorbing at shorter wavelength, Like e.g. Photointiator 907

SE 1702 is a bisphenol A epoxy acrylate oligomer which has been modified with fatty acid. This product is characterized by its flow and leveling, and its outstanding pigment wetting qualities.

SE 147 is a difunctional epoxy acrylate oligomer with 20% HDDA. This product is characterized by its light color, fast cure response, high gloss, excellent solvent resistance and high surface hardness.

Elite UVP5187 is a flexible hybrid ester acrylate.

Elite UVP6000 is a flexible hybrid ester acrylate