Products in Primers & Lacquers

Acronal® S 790, an aqueous dispersion of a styrene-acrylic copolymer, offers medium viscosity and impressive pigment binding power. With an anionic dispersion type, it caters to diverse applications such as architectural coatings, textured finishes, exterior insulation and finishing systems (EIFS), grouts, interior paints, and primers. Boasting a broad formulation latitude, exceptional cost-performance ratio, outstanding saponification, and alkaline resistance, excellent water resistance, and superior dirt pick-up resistance, Acronal® S 790 stands out as a reliable solution for professionals in the coatings industry. Its versatile properties make it an ideal choice for achieving optimal performance in various architectural and coating applications.

Acronal® S 790 E is an anionic aqueous dispersion of a styrene acrylic copolymer, featuring medium viscosity and excellent pigment binding power. Presented in liquid dispersion form, it finds application across various areas, including architectural coatings, textured finishes, exterior insulation and finishing systems (EIFS), grouts, interior paints, and primers. With its versatile characteristics, Acronal® S 790 E stands as a reliable solution for achieving high-quality finishes and coatings in a range of architectural and construction applications.

Efka® FA 4600 is an anti-settling agent for non-aqueous coatings, preventing sedimentation and agglomeration of even heavy pigments. is in a colorless to yellowish/reddish liquid form, Efka® FA 4600 is easily applicable and contributes to maintaining the stability of coatings.

Efka® MI 6613 is a corrosion inhibitor designed for use in primers and one-coat paints based on binders drying by oxidation. Its chemical composition passivates rust residues after mechanical pre-treatment of the substrate and eliminates residual moisture from the paint film through a capillary effect.

Foamaster® MO 2108 is a defoamer based on mineral oil, featuring a blend of low-aromatic mineral oil, hydrophobic silica, and fatty acid derivatives. It is suitable for most water-based paints, lacquers, and printing inks, presenting as an opaque, grayish liquid.

Tinopal® OB CO is a fluorescent optical brightener that offers excellent heat resistance, high chemical stability, and brilliant bluish whitening effects. It exhibits good compatibility with a wide range of resins for coating and printing ink applications. This product is available in the form of a yellow powder.

Acronal® TS 790 is an aqueous styrene acrylic dispersion characterized by medium viscosity and outstanding pigment binding capacity. With an anionic dispersion type, it is presented in liquid form. This versatile product finds application in various areas, including architectural coatings, textured finishes, exterior insulation and finishing systems (EIFS), grouts, interior paints, and primers. Whether enhancing the esthetic appeal of architectural coatings or providing durable finishes for exterior insulation systems, Acronal® TS 790 ensures reliable performance across a range of applications in the realms of construction, interior design, and protective coatings.

Acronal® S 813, a silanized aqueous dispersion of a styrene-acrylic copolymer, stands out for its premium quality and eco-friendly composition without formaldehyde and APEO. With an anionic dispersion type, it excels in applications such as premium architectural coatings, textured finishes, exterior insulation finishing systems (EIFS), premium interior paints, primers, special paints for tiles/bathrooms, and paste-like tile adhesives. The product offers exceptional adhesion on mineral substrates, including glazed tiles and glass, along with outstanding wet scrub resistance, excellent water resistance, high cohesion, very good dirt pick-up resistance, and reduced formation of snail trails. Acronal® S 813 is the ideal choice for professionals seeking top-tier performance in a variety of coating applications.

Plastigen® G ULFl is a cutting-edge product in the realm of CASE ingredients, serving as both binder and resin. Tailored for industrial and furniture coatings, packaging coatings, primers, and lacquers, this top coat technology showcases unparalleled versatility. Plastigen® G ULFl ensures superior performance in diverse applications within the paints and coatings industry.

Joncryl® HSL 9010 is a liquid product with end uses in waterborne ink and lacquers. Recognized for its high performance, it finds applications in the markets of paints and coatings, printing, and packaging. With its liquid physical form, it serves as a coating for primers and lacquers.

Joncryl® HSL 9012, a high-performance member of the Acrylics & Acrylates chemical family, takes the spotlight within CASE Ingredients. Specifically categorized under Resins & Binders in the realm of Other Resins & Binders, this liquid formulation is designed for a range of applications. With a particular focus on printing and packaging, Joncryl® HSL 9012 proves ideal for packaging coatings, primers, and lacquers. In its liquid form, this product ensures ease of use and efficiency in diverse formulations. Trust in the reliability and high performance of Joncryl® HSL 9012 to elevate the quality of your packaging coatings and lacquers.

GENIOSIL® GF 80 is an epoxy functional alkoxysilane. When used as a coupling agent in mineral-filled plastics, it enhances filler dispersibility, reduces sedimentation tendency, and significantly lowers the resin's viscosity. Moreover, it allows for higher filler loading and provides notable improvements in water (vapor) resistance, as well as resistance to acids and bases. In the realm of adhesives and sealants, incorporating GENIOSIL® GF 80 enhances adhesion to the substrate and improves mechanical properties like flexural strength, tensile strength, and modulus of elasticity.

ELASTOSIL® RD 3151 F is a silicone rubber dispersion used for textile coatings and as a primer for bonding silicone rubber on PEX surfaces. It finds application in industrial textiles. The dispersion offers properties such as high abrasion resistance, easy-to-clean surfaces, and high heat resistance.

VINNAPAS® 561 ED is a low Tg polymer dispersion based on vinyl acetate and ethylene. It exhibits excellent elongation, flexibility, and water resistance, making it ideal for numerous construction applications. VINNAPAS® 561 ED exhibits high filler loading capabilities and is compatible with both fully and partially hydrolyzed polyvinyl alcohols, as well as other synthetic latex polymer dispersions (such as styrene/acrylic and pure acrylic dispersions).

WACKER® Silicate MKS is an ethyl silicate binder suitable for the formulation of one-pack ethyl silicate zinc-rich primers. These primers are excellent anti-corrosive coatings. WACKER® Silicate MKS is a binder with outstanding anti-setting properties. Paints formulated with it are easy to stir up, even if they have been stored for a long time.

SILRES® BS 310 is a solventless emulsion that can be thinned with water. It consists of polysiloxane modified with a functional silicone resin. This product is specifically designed to be added to aqueous masonry coatings and primers, either during or after their manufacture. When used undiluted, SILRES® BS 310 serves as an additive for aqueous indoor paints or coatings. Its purpose is to enhance the workability of the paint or coating, resulting in improved application properties. This product is highly compatible with indoor paints and has a positive influence on wetting and leveling properties.

SILRES® BS 3003 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Diluted solutions of SILRES® BS 3003 serve as high-quality general-purpose water repellents for impregnating and priming mineral surfaces. It can also be used for the mass treatment of non-load-bearing concrete products and as a post-hydrophobation agent for fiber cement products like fiber cement boards.

VINNOL® H 30/48 M is a terpolymer consisting of approximately 70 wt.% vinyl chloride (VC), 29 wt.% vinyl acetate (VAc), and 1 wt.% dicarboxylic acid. It contains carboxylate groups within its structure. This product is primarily employed as a binder for surface coating compounds and printing inks. VINNOL® H 30/48 M acts as a thermoplastic, physically drying binder that forms a film upon evaporation of the solvent in the formulation.

VINNAPAS® 530 ND is a construction dispersion for primers, cement admixes, and repair mortars. VINNAPAS® 530 ND is based on a vinyl acetate/ethylene copolymer. It reduces the elastic modulus and enhances adhesion. VINNAPAS® 530 ND is an unplasticized 55% dispersion of a vinyl acetate/ethylene copolymer in water.

VINNOL® H 15/45 M Special is a specialized carboxylate-containing terpolymer composed of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 0.5 wt.% dicarboxylic acid. Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic and physically drying binder creates a film as the solvent within the formulation evaporates.

VINNOL® H 40/55 is a copolymer comprising approximately 62 wt.% vinyl chloride (VC) and approximately 38 wt.% vinyl acetate (VAc). Its primary application lies in serving as a binder for surface coating compounds and printing inks. Functioning as a thermoplastic, physically drying binder, VINNOL® H 40/55 undergoes film formation once the solvent present in the formulation has evaporated.

VINNOL® H 40/43 is a copolymer composed of approximately 66 wt.% vinyl chloride (VC) and approximately 34 wt.% vinyl acetate (VAc). Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes physical drying, resulting in the formation of a film once the solvent in the formulation has evaporated.

VINNAPAS® 547 ED (NJG) is a versatile polymer dispersion with high water resistance and excellent compatibility. This product is a dispersion based on vinyl acetate and ethylene. VINNAPAS® 547 ED (NJG) is produced without using formaldehyde donors and without adding plasticizers or organic solvents.

VINNOL® E 15/45 M is a carboxylate-containing terpolymer consisting of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 1 wt.% dicarboxylic acid. It functions primarily as a binder in surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

SILRES® BS 4004 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Dilute solutions of SILRES® BS 4004 serve as high-quality general-purpose water repellents for hydrophobic impregnation and priming of mineral surfaces. Treated mineral substrates exhibit an excellent beading effect. Additionally, SILRES® BS 4004 can be used for mass hydrophobation of non-load-bearing concrete products.

VINNOL® H 15/45 M is a carboxylate-containing terpolymer consisting of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 1 wt.% dicarboxylic acid. It is primarily employed as a binder in surface coating compounds and printing inks. VINNOL® H 15/45 M functions as a thermoplastic, physically drying binder that undergoes film formation as the solvent within the formulation evaporates.

GENIOSIL® GF 96 is an alkoxysilane with an amino-functional group. It is a clear, colorless liquid with a characteristic amine odor. This product finds applications in various industries, particularly in building and construction adhesives, DIY projects, flooring installation, interior paints and coatings, and waterproofing membranes. GENIOSIL® GF 96 offers excellent adhesive properties and is well-suited for use in the construction and home improvement sectors.

VINNAPAS® 536 ED is a versatile polymer dispersion based on vinyl acetate and ethylene with a high solid content. It is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The residual monomer content is below 1000 ppm. The dispersion is characterized by high bonding strength combined with increased flexural strength and good compatibility with inorganic fillers like CaCO3.

VINNOL® H 40/60 is a copolymer composed of approximately 61 wt.% vinyl chloride (VC) and approximately 39 wt.% vinyl acetate (VAc). Primarily, it serves as a binder for surface coating compounds and printing inks. As a thermoplastic binder, VINNOL® H 40/60 undergoes physical drying, resulting in the formation of a film as the solvent in the formulation evaporates.

WACKER® Silicate S100 is a ready-to-use ethyl silicate binder with a flash point above 21°C. It is primarily used for formulating single-pack ethyl silicate zinc-rich primers, which are commonly used as anti-corrosive coatings. This product is particularly suitable for applications in marine, protective, and industrial coatings.

VINNOL® H 15/42 is a copolymer consisting of approximately 86 wt.% vinyl chloride (VC) and 14 wt.% vinyl acetate (VAc). Its primary application is as a binder in surface coating compounds and printing inks. This thermoplastic and physically drying binder undergoes film formation as the solvent present in the formulation evaporates.

VINNAPAS® SAF 608 is a water-based dispersion containing a fine-particle-sized copolymer of styrene and acrylic acid ester. It has a solid content of 50%. This product is manufactured without the inclusion of coalescents, organic solvents, plasticizers, or compounds containing alkyl phenol ethoxylate (APEO). It exhibits excellent penetration into porous substrates and offers great flexibility.

VINNOL® H 40/50 is a copolymer composed of approximately 63 wt.% vinyl chloride (VC) and approximately 37 wt.% vinyl acetate (VAc). Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes physical drying, resulting in the formation of a film as the solvent within the formulation evaporates.

WACKER® Silicate TES 40 WN is an ethyl silicate polymer. It is a low-viscosity liquid that provides approximately 41% of silicon dioxide (silica) upon complete hydrolysis. WACKER® Silicate TES 40 WN is used for the precipitation of polymeric SiO2 structures (silica) upon complete hydrolysis, with ethanol being produced as a by-product.

VINNOL® H 11/59 is a copolymer composed of approximately 89 wt.% vinyl chloride (VC) and 11 wt.% vinyl acetate (VAc). Its primary application lies in serving as a binder for surface coating compounds and printing inks. As a thermoplastic and physically drying binder, VINNOL® H 11/59 undergoes a film-forming process when the solvent within the formulation evaporates.

SILRES® BS SMK 2101 is a solventless silicone microemulsion concentrate based on silanes and siloxanes that is diluted with water to yield a microemulsion. Dilute aqueous solutions of SILRES® BS SMK 2101 are high-quality specialty water repellents for hydrophobic impregnation and priming normal and reinforced concrete, as well as water resisting admixtures for non-load-bearing manufactured concrete products.